Question about Belkin (F5D8231-4) Wireless Router (F5D82314)

1 Answer

Just need to know if the connection type is 1) Static IP 2) Dynamic IP 3) PPPoE or 4) PPTP I am trying to install wireless in the house

Posted by on

  • IT aid
    IT aid May 11, 2010

    hello can you give more details about this router ?

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 72 Answers

CONTACT YOUR SERVICE PROVIDER WHO WILL BE ABLE TO CONFIRM/VERIFY THE DETAILS YOU NEED.
EITHER THAT LOOK THROUGH THE LETTER FROM YOUR SERVICE PROVIDER AND DETAILS WILL BE THERE SOMEWHERE.
NORMALLY A STATIC IP IS CHARGED EXTRA BUT SERVICE PROVIDER WILL CONFIRM

GOOD LUCK

Posted on Jul 14, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do i turn on the dhcp on my wrt54g2 router


Go to 192.168.1.1
Log into the router (Default username is left blank, password is admin)
On the setup page, make sure "enable DHCP" is checked.


Jun 20, 2011 | Linksys WRT54G2 Wireless Router

2 Answers

How to configure a router


  1. Login to the router page but typing http://192.168.2.1 on IE
  2. Check if you have a WAN IP or Internet IP
  3. If it is 0.0.0.0 then there is a problem
  4. If your internet provided is Cable you may have to do MAC clone
  5. If your internet provided is DSL you have to configure the router in PPPoE mode
  6. You will get WAN IP and will be able to go online
  7. Change the SSID which is nothing but the wireless network name
  8. Change the security to WPA or WPA2 and setup a security key

Aug 17, 2010 | Belkin (F5D7230-4) Router (587009)

2 Answers

I have a belkin router N-150 F6D4230-4 and it has been hooked up for a while. Well, I had to get my internet turned back on today and now my wireless internet does not work. The modem light is flashing on...


It would be best if you setup the router again. Restore the router to factory defaults. Note: This will remove all previously configured settings "some router has reset button on the back of the router cover by a sticker. The reset button is small that you need a pen to reset it."

1.Unplug the power to the cable / DSL modem
2.Connect the power to the router.
3.Connect a computer to one of the LAN ports of the router.
4.Restart your computer.
5.From the computer connected to the router, open your web browser (internet explorer).
6.Enter the router's address, http://192.168.2.1
7.Click Login in the upper right-hand corner of the page. The router does not ship with a password, so just click Submit.
To configure the router to connect to the Internet, you must enter information provided by your Internet Service Provider (ISP) into the "Connection Type" section in the left-hand column under the "Internet WAN" heading of the router's configuration page. If using DSL Internet, you may need to enter the PPPoE username and password. Likewise, if you have been issued a static IP address by your provider, the static IP fields (including network mask and gateway) must also must be set in the router.
ISP Connection Type
AT&T PPPoE
Charter PPPoE, Dynamic
Comcast Dynamic
Earthlink PPPoE, Dynamic
Qwest PPPoE
Road Runner PPPoE, Dynamic
Verizon PPPoE, Dynamic
8.Plug the power back into your Internet modem.
9.Verify that this computer can connect to the Internet properly. Open a new web browser and visit a few Internet sites such as Google.com or Yahoo.com.
10.Finally, configure additional network security features as desired to guard your systems against Internet attackers

If issue is not resolve you can contact your Internet Service Provider for assiatnce.

Nov 20, 2009 | Belkin Computers & Internet

2 Answers

Linksis router wont work help me out


First of all contact your isp and get your connection settings. If you are able to setup the router using the cd provided then good. If you are still having problems then go ahead and contact linksys (remember linksys charges for the support). I suggest get a technician to assist you in setting up.

Jul 22, 2009 | Linksys Wireless-G WRT54G Router

1 Answer

Type of internet connection.


acces your router and go to wan and check your conection type
therer are 2 link to acces your router
http://192.168.1.1
or
http://192.168.0.1

Mar 28, 2009 | Belkin Wireless G Plus MIMO (F5D9230-4)...

1 Answer

In setting up my wireless router it asks me which type of interne


if you have a dialer , than right click on it and see its properties for its type. (ppoe or pptp).
if you are connected without a dialer, you probably have a dynamic ip.
you can also contact your isp and ask them.

Mar 28, 2009 | Belkin Wireless G Plus MIMO (F5D9230-4)...

1 Answer

I am doing the setup cd and i am at step 4 connection type- static ip dynamic ip pppoe pptp what on do i need


which type of internet connection are u using ?

plz check the correct box .i think it would be pppoe

Nov 22, 2008 | Toshiba Tecra 730CDT Notebook

1 Answer

Installation CD


I lost my installation CD and received these instructions from the Belkin Tech Support, and was able to install the Wireless N Router with no problems.
Follow the steps given below for configuring the Belkin N router manually.
- Connect the computer to the "LAN" port on the router and connect the modem to the Internet/"WAN" port, using Ethernet cables. 
- Take a paper clip, insert the paper clip in the reset hole of the router and hold it for 15 seconds.
- The power light will flash and then come back "ON" solid, indicating that the router is being restored to factory defaults.
- The corresponding lights on the front of the router should be lit up.
- On the computer, check if you have an IP address in the range of 192.168.2.x.
- If not, specify a static IP address, gateway and "DNS" address by following the steps given in the link-
http://web.belkin.com/support/kb/kb.asp?a=2824 
- Log on to the router web interface by typing in http://192.168.2.1, in the address bar of your browser.
- By default, the password is blank.
- Click on "Connection Type" in the left hand column under "Internet WAN" heading.

If the connection type is Dynamic (cable):

- Choose "Dynamic" and then click on "Next". 
- Type in your “Host Name”, if you’re Internet Service Provider has provided it. Else, leave it blank.
- Click on "Change WAN MAC Address".
- Click on the button "Clone".
- Click on "Apply Changes". 

If the connection type is PPPOE (DSL):

- Choose "PPPOE" and click on "Next".
- Enter the user name and password given by your Internet Service Provider.
- Save the settings.
- Click on the "Home" link at the top of the screen. 

Internet Status should show "Connected" on the top right hand corner of the web page.

If the problem persists, please get back to us with the following information:

1. Type of connection provided by your ISP (Is it PPPOE, Dynamic or static).
2. Name of the Internet service provider (ISP).

Aug 11, 2008 | Belkin Wireless-N Wireless Router with...

2 Answers

Wan indicator does not light up..


Hi there

Getting Started

Setting up a Wireless Infrastructure Network
8bd3361.jpg
Please remember that D-Link AirPlus G wireless devices are pre-configured to connect together, right out of the box, with their default settings.For a typical wireless setup at home (as shown above), please do the following:
1) You will need broadband Internet access (a Cable or DSL-subscriber line into
your home or office)
2) Consult with your Cable or DSL provider for proper installation of the modem
3) Connect the Cable or DSL modem to the DI-524 Wireless Broadband Router
(see the printed Quick Installation Guide included with your router.)
4) If you are connecting a desktop computer to your network, install the D-Link AirPlus G DWL-G510 wireless PCI adapter into an available PCI slot on your desktop computer. You may also install the DWL-G520, or the DWL-520. (See the printed Quick Installation Guide included with the network adapter.)
5) Install the D-Link DWL-G630 wireless Cardbus adapter into a laptop computer.
(See the printed Quick Installation Guide included with the DWL-G630.)
6) Install the D-Link DFE-530TX+ adapter into a desktop computer. The four Ethernet LAN ports of the DI-524 are Auto MDI/MDIX and will work with both Straight-Through and Cross-Over cable. (See the printed Quick Installation Guide included with the DFE-530TX+.)

Using the Configuration Menu

Whenever you want to configure your network or the
DI-524, you can access the Configuration Menu by
opening the web-browser and typing in the IP Address
of the DI-524. The DI-524 default IP Address is shown
bellow:
-Open the web browser
-Type in the IP Address of
the Router (http://192.168.0.1)
cf4c550.jpg
Note: if you have changed the default IP Address assigned
to the DI-524, make sure to enter the correct IP Address.

-Type admin in the User
Name field
-Leave the Password blank
-Click OK
22e0166.jpg

The Home>Wizard screen will appear. Please refer to the Quick Installation Guide for more information regarding the Setup Wizard.

Home > Wizard
1255162.jpg

These buttons appear on most of the configuration screens in this section. Please click on the appropriate button at the bottom of each screen after you have made a configuration change.
066a66b.jpg


Home > Wireless
08740e2.jpg

SSID- Service Set Identifier (SSID) is the name designated for a specific wireless local area network (WLAN). The SSID’s factory default setting is default. The SSID can be easily changed to connect to an existing wireless network or to establish a new wireless network.

Channel- 6 is the default channel. All devices on the network must share the same channel. (Note: The wireless adapters will automatically scan and match the wireless setting.)

WEP- Wired Equivalent Privacy (WEP) is a wireless security protocol for Wireless Local Area Networks (WLAN). WEP provides security by encrypting the data that is sent over the WLAN. Select Enabled or Disabled. Disabled is the default setting. (Note: If you enable encryption on the DI-524 make sure to also enable encryption on all the wireless clients or wireless connection will not be established.)

WEP Encryption- Select the level of encryption desired: 64-bit, or 128-bit

Key Type- Select HEX or ASCII

Keys 1-4- Input up to 4 WEP keys; select the one you wish to use.

Home > WAN > Dynamic IP Address
94836c8.jpg

Host Name- The Host Name is optional but may be required by some ISPs. The default host name is the device name of the Router and may be changed.

MAC Address- The default MAC Address is set to the WAN’s physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP.

Clone MAC Address- The default MAC address is set to the WAN’s physical interface MAC address on the Broadband Router. You can use the “Clone MAC Address” button to copy the MAC address of the Ethernet Card installed by your ISP and replace the WAN MAC address with the MAC address of the router. It is not recommended that you change the default MAC address unless required by your ISP.


Home > WAN > Static IP Address
eb48373.jpg
Static IP Address- IP Address-

Subnet Mask- ISP

Gateway Address- Primary

DNS Address- Secondary

DNS Address- Choose Static IP Address if all WAN IP information is provided to you by your ISP. You will need to enter in the IP address, subnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the fields must be in the appropriate IP form, which are four octets separated by a dot (x.x.x.x). The Router will not accept the IP address if it is not in this format.

IP Address- Input the public IP Address provided by your ISP.

Subnet Mask- Input your Subnet mask. (All devices in the network must have the same subnet mask.)

ISP Gateway Address- Input the public IP address of the ISP to which you are connecting.

Primary DNS Address- Input the primary DNS (Domain Name Server) IP address provided by your ISP.

Secondary DNS Address- This is optional.

Home > WAN > PPPoE
683d185.jpg
*** Please be sure to remove any existing PPPoE client software installed on your computers.

Choose PPPoE (Point to Point Protocol over Ethernet) if your ISP uses a PPPoE connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. Select Dynamic PPPoE to obtain an IP address automatically for your PPPoE connection. Select Static PPPoE to use a static IP address for your PPPoeE connection.

PPPoE- Choose this option if your ISP uses PPPoE. (Most DSL users will select this option.)

Dynamic PPPoE- receive an IP Address automatically from your ISP.

Static PPPoE-you have an assigned (static) IP Address.

User Name- Your PPPoE username provided by your ISP.

Retype Password- Re-enter the PPPoE password

Service Name- Enter the Service Name provided by your ISP (optional).

IP Address- This option is only available for Static PPPoE. Enter the static IP Address for the PPPoE connection.

Primary DNS Address- Primary DNS IP address provided by our ISP

Secondary DNS Address- This option is only available for Static PPPoE. Enter the static IP Address for the PPPoE connection.

Maximum Idle Time- Enter a maximum idle time during which Internet connection is maintained during inactivity. To diable this feature, enable Autoreconnect.

MTU- Maximum Transmission Unit-1492 is the default setting-you may need to change the MTU for optimal performance with your specific ISP.

Auto-reconnect- If enabled, the DI-524 will automatically connect to your ISP after your system is restarted or if the PPPoE connection is dropped.

Home > LAN
4a9c31e.jpg
LAN is short for Local Area Network. This is considered your internal network. These are the IP settings of the LAN interface for the DI-524. These settings may be referred to as Private settings. You may change the LAN IP address if needed. The LAN IP address is private to your internal network and cannot be seen on the Internet.

IP Address- The IP address of the LAN interface. The default IP address is: 192.168.0.1.

Subnet Mask- The subnet mask of the LAN interface. The default subnet mask is 255.255.255.0.

Local Domain- This field is optional. Enter in the local domain name.

Home > DHCP
8d32e58.jpg

DHCP stands for Dynamic Host Control Protocol. The DI-524 has a built-in DHCP server.
The DHCP Server will automatically assign an IP address to the computers on the LAN/
private network. Be sure to set your computers to be DHCP clients by setting their TCP/
IP settings to “Obtain an IP Address Automatically.” When you turn your computers on,
they will automatically load the proper TCP/IP settings provided by the DI-524. The
DHCP Server will automatically allocate an unused IP address from the IP address pool
to the requesting computer. You must specify the starting and ending address of the IP
address pool.

DHCP Server- Select Enabled or Disabled. The default setting is Enabled.
Starting
IP Address- The starting IP address for the DHCP server’s IP assignment
Ending
IP Address- The ending IP address for the DHCP server’s IP assignment
Lease Time- The length of time for the IP lease. Enter the Lease time. The
default setting is one hour

Advanced > Virtual Server
58de0f2.jpg

If you would like to view more of this manual CLICK HERE

Thank you for using FixYa. Have a nice day and please remember to give this solution a good rating.

Jun 28, 2008 | D-Link AirPlus DI-524 Wireless Router

3 Answers

D-Link DSL-2640


First I will need to know the type of ISP service you have, T1 - DSL - ADSL - CABLE - etc. And the connection type, STATIC IP - DYNAMIC IP - PPPOE - etc. BPCS

Dec 11, 2007 | D-Link ADSL2/2+ Modem/Wireless Router...

Not finding what you are looking for?
Belkin (F5D8231-4) Wireless Router (F5D82314) Logo

Related Topics:

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Belkin Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2263 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18411 Answers

Are you a Belkin Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...