Question about Microsoft Windows XP Professional With Servise Pack 2 (e8503040) for PC

2 Answers

How to find sound in bios

Being a total beginer , how would i find my way around in bios to intergrated peripherals to check my sound.

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,961 Answers

You press F2 or Del on start up and then highlight advanced cmos settings, then, look for your hardware.

You can check your sound devices by clicking start>run, then type dxdiag and press enter.

Click on the sound tab and then the system will run a diagnostics of your sound card and drivers.

Posted on Nov 17, 2007

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 306 Answers

If what your doing is trying to use an aftermarket sound card then you need to go into "device manager" and disable the intigrated sound card to eliminate conflicts. The bios will have nothing to do with sound.

Posted on Nov 17, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Dell Vostra gives beep sound while start.\r\nPlz help me


Hi Shravyashri,

Usually beep sound while starting indicates hardware failure or BIOS error
To check hardware change check your keyboard(check all the keys),touch pad and peripherals.
If it's a BIOS issue it won't gives Boot and BIOS options.
Thank you have nice day feel free to ask queries

Feb 16, 2011 | Nokia E63 Cell Phone

1 Answer

Can not detect devices from USB ports


Enter the bios by pressing the delete key every 2 seconds at boot up. Open your manual to page, 2-17. Section 2.4.2 Intergrated Peripherals. Find, USB 2.0 Controller and make sure it is set to [Enabled]. Save and exit the bios. Your system will auto restart.
Your USB ports should be working after windows loads. Play it safe and check windows for software and hardware updates.

Cheers'
Mike

Jul 30, 2010 | ASUS P4GE-MX Motherboard

1 Answer

My acer aspire 4315-2490 just shut-off after more that 2hours of use even if a/c adapter is still connected. I turned on the power button and it begins startup after a minute it again totally shuts off. I...


It sounds like the machine is overheating. When you are using it, make sure that the intake vent is clear and that you're not leaving it on for extremely long periods of time. You could also check that there isn't a large amount of dust on the vents.

Jul 17, 2010 | Acer Aspire 4315-2490 Notebook

1 Answer

I am not getting any sound from desktop speakers..i have sony driver installed


Onboard audio is disabled in the BIOS
The BIOS Setup program is accessed by pressing the <F2> key after the Power-On Self-Test (POST) memory test begins and before the operating system boot begins. Go to the Advanced > Peripheral Configuration menu to make sure onboard audio is enabled.
Audio settings in the sound mixer are incorrect
Check your audio mixer software to ensure audio is not muted or the volume level is not turned too low.
The speakers or headphones may be connected to the wrong jacks
Make sure you connect all speakers to the correct jacks. If you connect them to line-in or microphone jacks, they won't work.
Audio drivers are not properly installed
Check Device Manager under the Sound, video and game controllers section for any errors associated with the audio driver. Reinstall the audio driver if necessary.
Audio to back panel is muted if front panel is connected
Check your audio mixer software for a setting that mutes back panel audio if you have plugged headphones into a front panel audio solution. Uncheck this setting to allow audio to both the back and front.
Sound Playback is set to wrong device
In Control Panel > Sounds and Audio Devices, go to the Audio tab. Check the default device for sound playback; there may be multiple selections. Select the desired device, either rear panel or front panel.

Mar 06, 2010 | Office Equipment & Supplies

1 Answer

I have build up a new system around DG35EC intel motherboard, i installed drivers everything is fine, but it does not setect the onboard sound card.. pls help me,, i am using xp sp3 32 bit system


Enter bios by pressing F2 at boot it must be enabled in bios depending on the bios version where it is located may vary should look for
Main:
Advanced:
Peripheral Configuration:
Audio: Enable
High Definition Front Panel Audio: Enable

Jun 13, 2009 | Computers & Internet

1 Answer

How we can share RAM memory with graphics memory of our PC?


go into the system BIOS by pressing the DEL or F2 or F10 key and the you will see the BIOS menu, ther you will see intergreated peripherals and there you will see video ram something like that and there it will show you 8Mb change it to 32 or whatever you want press F10 and reboot and your memory is changed.

Mar 23, 2009 | Computers & Internet

2 Answers

Raid


I might guess two things: 1. the battery failed (and has been replaced), 2. the motherboard has both SATA and IDE sockets for hard disks and you are using IDE.
If the latter, (and the BIOS settings were lost when the battery went) the BIOS setting would default to SATA hard disks and produce the mesage in the POST screen of, 'The number of disks is not adequate to create a RAID array' and no keys will work in the POST screen except ESC.
Repeatedly press DELETE (on most computers) on start up, ignore the POST screen, and the BIOS settings screen will come up. Check the date and reset, then goto INTERGRATED PERIPHERALS and reset SATA to IDE, save and exit. This cured my problem.

Feb 27, 2008 | ASUS K8V-MX Motherboard

3 Answers

Msi p4m900m2 audio drivers installation


MSI -- MICRO-STAR INT'L CO., LTD. The Drivers provided here are exclusively for MSI products only. ... Realtek High Definition Audio Driver; Description ... Press F6 to install driver

Click on above Link , Good Luck, Please dont for get to Vote, Thank You.

Dec 16, 2007 | Intel Motherboard

3 Answers

Fitting New SATA Harddrive


Hi, google msi, click mainboard, click download, click manualy download, click AMD, click ARCHIVE, you will find your mobo here listed as "MS657" everything you need will be there. Goodluck mistyman

Sep 02, 2007 | MSI K7N2 Delta-ILSR (MS-6570-030)...

8 Answers

HD Audio Hardware Problem


I have a Deskop Board DG965RY. Sound device is problem the error is "device object not present" & "you are attempting to insall"

Aug 12, 2007 | Intel D945GTP Motherboard

Not finding what you are looking for?
Microsoft Windows XP Professional With Servise Pack 2 (e8503040) for PC Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Computers & Internet Experts

micky dee

Level 3 Expert

2983 Answers

Piyal Perera
Piyal Perera

Level 3 Expert

528 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Are you a Microsoft Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...