Question about Whirlpool Calypso GVW9959K Top Load Washer

Open Question

My whirlpool dryer model number gew9868kl1 keeps stopping with error E1

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
Karthik316
  • 187 Answers

SOURCE: Error E1 mean?

Hi,
An E1 error message usually indicates that the thermistor (see the following link) is defective and needs to be replaced.
http://www.appliance411.com/data.php?rc=548392
pls rate my suggestion...

Posted on Jun 26, 2009

Ad
blueextc3221
  • 15935 Answers

SOURCE: E1 error code on a

The E1 displayed indicates the thermistor is open and needs to be replaced. The connections can be loose but the most likely cause of an E1 error is a bad thermistor.
If you're comfortable and confident in your do-it-yourself skills and have access to a volt/ohm meter you can check and replace this part yourself.

For replacement parts - head on over to SearsPartsDirect.com - PartSelect.com - or RepairClinic.com and enter in your full model number for a full parts listing.

I recommend these sites because ...


FixYa has no affiliation with either site - I have been using and recommending them for years - trouble free.

SearsPartsDirect is Sears' website for parts and has extensive diagrams and parts lists.
PartSelect has a great schematic database for locating the part on your unit and great "testimonials" for each part that often times includes HOW-TO information.
RepairClinic has pictures of each part they sell and also a great how-to and troubleshooting for basic repairs.


If your unit has never been serviced - there should still be an original service manual enclosed in plastic taped to the inside of the shell.
In the service manual are Error codes, maintenance procedures, and troubleshooting steps you can follow.


Anything too complicated or beyond your scope should be handled by a professional.

If you think you want to tackle the repair - and have gotten stuck on a step - reply to your question and I will be glad to help you out.




Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Posted on Sep 17, 2010

Testimonial: "Thanks so much!"

blueextc3221
  • 15935 Answers

SOURCE: whirlpool duet gas dryer PF error will not reset as per manuals

PF - Power Failure - PF error code indicates a power failure during the dryer's cycle. Press and HOLD start to continue the cycle, or press off/pause to clear display.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Posted on Sep 21, 2010

rylee_smith
  • 8619 Answers

SOURCE: Whirlpool Duet Dryer Model #

Hi


Thanks for using FixYa. Error E1 in your Whirlpool Duet Dryer indicates Thermistor Failure which flashes when the thermistor is open (>50k ohms) or has gone bad. TO resolve this issue the thermistor should be replaced. Also check the Thermal fuse which is located on the blower wheel cover. Please accept the solution if the issue is resolved or post a comment for further assistance.


Thanks

Rylee

Posted on Sep 24, 2010

blueextc3221
  • 15935 Answers

SOURCE: I keep getting an E1 Error code on my Whirlpool

1 Beep/E10--Error: Water doesn't enter Cause: Water supply problem, Check kinks and faucets
1 Beep/E10--Error: Water leaks Cause: Water connections loose,household drain clog,oversudsing. Correct problems.
1 Beep/E10--Error: Dispenser drawer is open Cause: Washer will not operate if drawer is open.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Posted on Sep 30, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whirlpool Cabrio elec dryer error code f3 e1


Michael, We are sorry to hear about your Dryer giving an error message. We would recommend disconnecting power from the breaker for at least a minute and then turning the breaker back on to do a master reset on the Dryer. If you are in need of help after trying the reset, can you please email us your address, phone number, the model and serial number, the website you were contacted on, Fixya, your review ID, and date of purchase to Whirlpool_Digital@whirlpool.com?

Jun 13, 2017 | Whirlpool Dryers

1 Answer

Dryer stops running and displays E1


WHAT IS WRONG WITH YOUR DRYER?

small_8_20.jpg For a detailed Dryer illustration, click below.

redarrow.gif Gas Whirlpool Style Version 1
redarrow.gif Gas Whirlpool Style Version 2
redarrow.gif Gas Maytag Style
redarrow.gif Gas GE Style
redarrow.gif Electric Whirlpool Style Version 1
redarrow.gif Electric Whirlpool Style Version 2
redarrow.gif Electric Maytag Style
redarrow.gif Electric GE Style
Warning! To avoid personal injury or even death, always disconnect your appliance from its power source--that is, unplug it or break the connection at the circuit breaker or fuse box--before you do any troubleshooting or repair work on your appliance. Also, because some components may have sharp edges, use caution while working on your appliance.

Electric dryers aren't very complicated. Here are some common symptoms that you may experience with your dryer:

There's an error code on the digital display

It doesn't work at all
There's no heat
It won't tumble
Drying is too slow
It overheats
It seems to run forever
It's noisy
It won't start
The light doesn't work
It blows fuses or trips the circuit breaker
My clothes smell bad!
My clothes are marked or torn

Aug 11, 2008 | Whirlpool GEW9200L Electric Dryer

1 Answer

Stop after 1 minute E1


e1 error is bad thermister located on the top of the blower wheel housing,unplug it,remove the bottom panel,pull out the lint filter,remove the metal duct that the filter slides into and you'll see the thermister on top to the right of the blower wheel.if you sent model number i can give part number.

Sep 17, 2013 | Whirlpool Dryers

1 Answer

Shortly after starting a load in the dryer, the dryer stops, beeps and the lighted code says E1. The grid on back wall of dryer is very hot. I am unable to find my instruction booklet. This keeps...


Hello,

The E1 error code means that the electronic thermostat is the problem. With what your describing as far as it being very hot and the E1 code,i would suspect one of 2 things;

1) the thermister is bad and needs to be replaced

2) thier is a blocked/restricted vent and or excessive lint built up in the blower housing causing the heat to be retained in the dryer instead of being vented out and across the thermister where its getting a false reading and throwing up the E1 error code


GENE

Sep 12, 2011 | Whirlpool Duet 7.0 Cu. Ft. Super Capacity...

1 Answer

I ha a whirlpool model #GEW9200LW0 that runs and then stop after abot a minute and flashes E1


Hello there and thank you for choosing fixya
The dreaded E1 error code is telling you that the thermistor on the dryer has failed and needs to be replaced
Dryer thermister - Located on the blower housing next to the thermal fuse.
Part Number: AP3919451 made by WHIRLPOOL
HERE IS WHAT IT LOOKS LIKE
tbirdfan1_96.jpg

Aug 04, 2011 | Whirlpool GEW9200L Electric Dryer

1 Answer

Clothes seem to take longer to dry and I keep getting an E1 error code on my Whirlpool duet dryer. Model #GGW9209LW0. Dryer is about 8 years old. Lint is not an issue.


The error code E1 indicates the control senses an open thermistor either due to a loose connection or a failed thermistor. Check the thermistor connection to the control and replace the thermistor (part number 8577274) if the connections are good and snug fit.

Remove the two screws securing the toe panel to the cabinet then pull the panel down and out. Remove the hex-head screw from the lint duct bracket and remove the bracket. Remove the two hex-head screws from the lint duct and remove the lint duct.

Facing the rear of the dryer, the thermistor, usually black, is located on the blower housing to the right of the thermal fuse. Remove the two screws securing it to the blower housing and secure the new thermistor in place.

Connect the wires then reinstall the lint duct and the lint duct bracket. Slide the toe panel up into position to the cabinet and secure it.

Apr 27, 2010 | Whirlpool GGW9200L Gas Dryer

1 Answer

Code E1


E1 or E2 Thermistor Failure

The dryer will not operate if the exhaust temperature drops below 18 degrees F. or exceeds 250 degrees F.

When the thermistor circuit is open (>50K ohms), the error code E1 flashes in the display.

When the thermistor circuit is shorted (<500 ohms), the error code E2 flashes in the display.

Normal thermistor resistance values:
60 degrees F. - 15.3K ohms.
70 degrees F. - 11.9K ohms.
80 degrees F. - 9.2K ohms.

Take the top off the dryer and inside you'll find the "tech sheet." It has instructions for removing the front panel and locating the thermistor.

Apr 21, 2010 | Whirlpool Duet 7.0 Cu. Ft. Super Capacity...

2 Answers

My whirlpool gas dryer keeps coming up with E1 error code after drying for about 50 min, model ggw9200lwo. Any solutions to what the probelm might be?


The E1 code means there is an open thermistor. This thermistor is located on top of the blower housing. Access it by removing the bottom panel on the front of the dryer. This device is not repairable, so unless it's just a loose connection or the device is not firmly mounted, it will need to be replaced.

Unplug the dryer before you work on it!

Mar 28, 2009 | Whirlpool Duet 7.0 Cu. Ft. Super Capacity...

1 Answer

ERROR CODE E1 MODLE #GGW9200LW O


E1 error code is for the thermistor, try cleaning off the bottom of the thermistor, (sometimes tacky lint will coat them), if that doesn't help, just replace the thermistor.

Sep 17, 2008 | Whirlpool GGW9250PL Gas Dryer

Not finding what you are looking for?
Whirlpool Calypso GVW9959K Top Load Washer Logo

Related Topics:

97 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Sal DeAngelo

Level 3 Expert

2248 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...