Question about Clarion DC625 6-Disc CD Changer

4 Answers

CDAC ER2 I have a Clarion ARX 7270 that is a AM/FM radio cassette combination with CD changer control that gives the error message CDAC ER2. I have the manual but this error is not listed. Any solutions?

Posted by on


4 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 111 Answers

CDAC ER2 usually means a cd is stuck, not reading properly, or that the magazine is stuck or broken. take out all cds and try it with a known good cd (one that played ok in the past). if that doesn't work, try unplugging the unit and plugging it back in.

if it still doesnt work, take the magazine out, power it up so that you get the "no mag" error, then insert the magazine with no discs and see if it still errors out with ER2. if it does, then the magazine is bad, or the changer is bad..

if it works, then try the known good disc again, if it works now, your magazine was probably stuck, or one of the other cd's isn't liked by the changer.

hope this helps,

Posted on Nov 17, 2007

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Two CDs in one slot in the magazine also give this problem code

Posted on Mar 07, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I Have error9

Posted on Dec 30, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hey, I have the same system w/12 disc changer and my faceplate was stolen. Looks like I'll probably wind up getting a whole new system (what a pain!), so I have everything other than the faceplate if you need something. (head unit, 12cd changer)

Posted on Aug 13, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I was attempting to install a new stereo in my 2000 taurus. it requires to an adapter to put the new stereo in. i got the new adapter and stereo in *kinda* but decided i didnt really know what i was...

check your fuses first. You may have blown one.

Visual Inspection Chart Mechanical Electrical
  • Integrated control panel (ICP) physically damaged, misaligned, any control(s) inoperative
  • Digital audio compact disc player physically damaged, misaligned, any control(s) inoperative
  • Antenna or antenna cable physically damaged, misaligned connection(s)
  • Radio speakers, mounting/speaker cones physically damaged, misaligned
  • Radio ignition interference capacitors, radio frequency interference suppression bond misaligned (also check for cleanliness and metal-to-metal contact)
  • Battery junction box (BJB) fuses F127 (5A), F117 (20A), F127 (5A).
  • Central junction box (CJB) fuse F227 (10A) F211 (15A), F216 (15A), F226 (10A) (wagon only)

  1. If the fault is not visually evident, proceed to diagnose the integrated control panel (ICP) by entering the ICP Self-Diagnostic Mode.
ICP Self-Diagnostic Mode
NOTE: To enter the ICP Self-Diagnostic Mode, the ICP must be ON and in radio tuner mode (AM/FM).
  1. Enter the diagnostic mode by pressing and holding preset buttons 3 and 6 simultaneously. This will suspend all radio functions, and display SP.
  1. Preset Button 1 = Audio internal/external SELF TEST. The display will flash SELF while gathering the diagnostic trouble codes (DTCs), then stop flashing when complete. Press the TUNE UP button to display the DTCs if any exist. Record codes and refer to the following table:

ICP SELF-TEST CODES Code Description 0 No diagnostic trouble codes logged 1 No response from rear chassis unit (RCU) 2 No response from cassette player 3 - 4 No response from compact disc player 5 - 6 - 7 No response from remote climate control 8 - 9 Read Only Memory Verification failed
  1. Preset Button 2 = Displays the feature strap for code identification, refer to the following table.

Code Description 01 Base-Electronic Search Radio (ESR) with Manual Climate Control (MCC) 07 Electronic Search Radio with Cassette (ESC) with MCC 17 ESC with Electronic Automatic Temperature Control (EATC) 97 Not programmed default of ESC with EATC
  1. Preset Button 3 = ICP and RCU identification. This test identifies the software level of the ICP and RCU. The ICP is tested first, followed by the RCU. The display will have two sequences of three codes each. The first sequence is for the ICP, the second sequence is for the RCU. For code identification, refer to the following table:

Item Part Number Description 1 - Product variant code 2 - Tape model 3 - CDR

SOFTWARE IDENTIFICATION CODES Product Type Code Description Product Variant Code Description 21 ICP 07
12 EATC with AM/FM, cassette player and CD changer
EATC with AM/FM and cassette player
Manual A/C with AM/FM and cassette player
Manual A/C with AM/FM
EATC with AM/FM and cassette player
EATC with AM/FM cassette player and CD changer 31 RCU 01
03 Analog
Midline 71 Remote climate control 01 LH drive 52 Compact disc/disc jockey 01
04 Sony® 10 disc
Sony® 6 disc
Clarion® 6 disc
FMS 6 disc

Sep 13, 2011 | 2000 Ford Taurus

1 Answer

Rd634 clarion changer error code 9

two reasons one if you are recording a disk the error is because the disk may be scratched so you must cycle off the power and try a new disk if your not trying to record a disk error code 9 also means and this is taken directly from the manual..
There is a problem with the FM Modulator circuit.
Contact your authorized Clarion dealer for repair.

i hope this helps

Mar 14, 2011 | Clarion Car Audio & Video

1 Answer

How to remove a Clarion AB213R radio-Cassette ?

It depends on the type of Clarion Radio.

There are 2 types of Clarion Keys depending on the size of the removal slots in your radio  ...the older , larger version or the later slim version.

See the difference here

Available on Ebay , local car radio store etc

Jan 22, 2010 | Clarion Car Audio & Video

1 Answer

Jeep cd player says error

Cd player wont play or eject the cd.

Oct 25, 2009 | Jeep AM/FM Cassette with CD Changer...

1 Answer

How do i return to my radio from my cassette? The eject button is broken.

Open it, try manual eject, if not look for the switch that monitor between cassette and radio mode, you can do manual connection or switch it manually.get it?

Aug 30, 2009 | Pyle Double Din AM/FM Cassette & CD Player...

1 Answer

Err message on 1999 Jeep Grand Cherokee 10 CD changer

I had a similar problem which responded to the use of a CD cleaner disc to clean the laser lens reading the CD. The "err" messages stopped and the changer started to work as it had before. Perhaps this will correct your problem too.

Aug 02, 2009 | Jeep AM/FM Cassette with CD Changer...

1 Answer

Cassette adapter and MP3 not working

Usually a dirty tape head. I recommend adding a 3.5 jack to your radio through an fm modulator.

Apr 24, 2009 | Sanyo FXCD-500 RB CD/Cassette Receiver...

1 Answer

Arx 1970 car cassette

Setting the clock:
1.Press and hold the Band Button (on the left of radio)and the Clock setting button (button No:4 on the right) to display the clock.
2.Press and hold the Band button and the Clock Setting button again for 2 seconds or longer for the clock display adjustment.
3.Press the SEEK UP Button (on the right of the radio with the arrows) to set minute.
4.Press the SEEK DOWN button to set hour.
5.Press the Band button to confirm the clock setting.

Jul 11, 2008 | Clarion ARX6670Z Cassette Player

1 Answer

Cd changer

You can use any CD changer that has an FM modulater. You would listen to it by tuning in to a station on your tuner.

The sales person at any place that sells car stereos would be able to show you the right type of changer.

If your radio has a cd changer controller built into it, you need to check with the dealership to find out what the OEM changer would be. But a FM modulator will work with any car stereo.

Kenwood, Pioneer, JVC, Clarion, Alpine all sell FM modulator CD changers. I would not personally buy any of the cheaper no name brands. The money you save on the cost is not worth the difference in quality. Panasonic is a very good brand for car stereos but not home stereos, but I don't know if they make CD changers. if they do, that would be a good brand.

Jun 15, 2008 | Car Audio & Video

1 Answer

How to mute the radio

Here is the link for the user manual for the arx 4570 which is similar; (sorry exact model manual not available that i could find) For this model - the only ways you can mute it are by using the mute button on the set or on the remote control. Hope this helps - please ask again if not :)

Apr 18, 2007 | Clarion ARX4670 Cassette Player

Not finding what you are looking for?
Clarion DC625 6-Disc CD Changer Logo

1,075 people viewed this question

Ask a Question

Usually answered in minutes!

Top Clarion Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4905 Answers


Level 3 Expert

77947 Answers

The Knight
The Knight

Level 3 Expert

75025 Answers

Are you a Clarion Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides