Question about HP Deskjet F2210 InkJet Printer

2 Answers

I just bought a new printer cartridge and I don't know where I would put the cartridge.

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 72 Answers

Hi MSKRWILLIAMS

use this address and it will get you to HP website and go to section 5 which demonstrates how to install the ink cartridge

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01413446&lc=en&dlc=en&cc=us&product=3571753&lang=en

Good luck

Posted on Jul 14, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Mentor:

    An expert who has written 3 tips or uploaded 2 video tips.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 202 Answers

Just the cover over the spot where the paper comes out, pull it down and the ink carrier will slide out, wait for it for about 5 sec and when it finally halt insert the new ink. all these must be done with the printer on

Posted on Jul 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

An unsupported black toner cartridge is installed


Some replacement cartridges require a new "chip" be installed to tell the printer that the cartridge is a match. I would check with New Egg and see if they forgot to send the chips, if required. I don't know of a manual bypass to the system.

Dave W.

Sep 14, 2012 | Xerox Phaser 6100/DN Laser Printer

1 Answer

My Brother LC61, bought in Nov.2010, won't print black. Recently replaced black ink along with all color inks...replaced black ink again when it quit printing...still won't work. Machine whirs...


This is common problem with Brother Printers. I am going to assume you are using Non-Brother branded ink cartridges. Brother cartridges have a cleanser in the ink that most generic cartridges don't have. This in turn causes the jets to clog and not allow ink to pass through them. The fix is to go buy a couple of Brother cartridges and do a cleaning with those cartridges. You may spend some money doing this as a cleaning wastes a lot of ink, but it will clean the injection lines and fix the printer. You could also consider buying a new printer. I know this is not the answer you were looking for, but it is the true answer. I just bought a new printer due to this fact.

In case of a problem or clarification or my solution was insufficient, don't hesitate to post me a reply.

If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.

Jun 11, 2011 | Brother Multi-Function Center MFC-240C...

1 Answer

Changed toner---back side now prints dirty with band on the top. Did the cleaning procedure - no luck


If you changed toner because old was empty and now you have this defect with the new cartrige, it is most likley a defective cartridge. Try the old cartridge again, if it prints clean, then you know for sure it is the cartridge. If you purchased a new HP cartridge, get it replaced by HP, they warranty their toners against defects. If you bought a 3rd party toner, return it to where you bought it and get them to replace it. If you had your old toner refilled by someone, get your money back, they don't know what they are doing. This type of defect is often caused by a filled waste toner bin then then runs back out when you print. Some refillers just throw toner in and don't empty the waste toner bin.

Jun 07, 2011 | Office Equipment & Supplies

2 Answers

Do the reset chips really work on the cartridges of HP 2500N laserjet printer


Yes, reset chips really work on laser printer cartridges, if you have a know good source for the chips and if you know what your doing, you can't put a new chip on an old cartridge, the chip is what registeres how may prints you will get out of the cartridge if you put a new chip on an old or 1/2 empty cartridge of course it will say it's full but then try and print.It will register as a full cartridge but it can only print with the amount of toner that is actually left in the cartridge, be careful there are alot of remanufactures out there that don't put new chips on or that do but don't fill the cartridge full, or replace all the wipers and drums, they just dump some toner in and say here you go, Only buy your remanufactured cartridges from a reputable company, do your research on them first or you'll be sorry

Aug 14, 2010 | HP LaserJet 2500N Printer

1 Answer

Kodak ESP 3 doesn't print black ink!



Forgive me for asking this, but roughly speaking about 80 to 85% of problems involving ink or toner are resolved by the following:
Are you using a manufacturer’s factory new ink cartridge or toner? I
f you are using a refilled (worst possible choice) cartridge , toner or ink, or third party cartridge (2nd. worst possible choice) that may well be your problem. Most manufacturers build logic into their products to prevent the use of “Other Equipment Manufactured” cartridges as well as re-filled cartridges.
They do this to prevent problems from contaminated inks causing problems with print quality or damaging the physical printhead.
If you are using the manufacturer’s new ink cartridges, then please contact their technical support group. Factory new cartridges usually have warranties on them.
Don

Feb 27, 2010 | Kodak ESP 3 Multifunction Printer/ Copier/...

1 Answer

Put in new ink cartridge and get error black and color cartridges need replacing


"New" refilled cartdiges? Or new from the manufacturer? Some printers have chips in the cartridges that "know" when they ran out of ink, and they have to be reset. If the refiller didn't reset the chip, it still "thinks" that the cartridge is empty.

If they're new cartridges, bought from the same place at the same time, I'd suspect bad cartridges.

Jul 22, 2009 | Office Equipment & Supplies

1 Answer

Canon Printer Picms MP450 Error 6500


They don't like re used cartridges.
I would purchase a new printer as they are not economic to repair.

Feb 27, 2017 | Canon Pixma MP450 All-In-One InkJet...

2 Answers

Won't print from 3ebk cartridge


i think there is problum in ur cartridge cas adoptor , clean cartridge circuit plate and put cartridge then try

Jun 05, 2008 | Canon PIXMA MP760 All-In-One InkJet...

Not finding what you are looking for?
HP Deskjet F2210 InkJet Printer Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...