System Sensor 2100rfadt Wireless Smoke Detecor Logo
A
Anonymous Posted on Dec 16, 2015

It was beeping every 15 seconds or so. I pulled unit off ceiling and checked batteries. Reinstalled. No more beeping. Do I need to replace batteries?

I have a battery tester for AA AAA and 9volt batteries. I used it to check batteries in detector.

1 Answer

Jay Plesset

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Master 2,942 Answers
  • Posted on Dec 16, 2015
Jay Plesset
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: May 30, 2010
Answers
2942
Questions
2
Helped
668467
Points
9879

The beeping means that the detector was sensing low voltage from the battery. If the battery is over a year old, most manufacturers recommend yearly replacement on smoke detector batteries.

Testimonial: "The beeping has stopped. I haven't replaced the batteries, but will keep that in mind during the coming week."

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

My Kidde beeps after installing new batteries. Every 30 seconds. What should I do?

The unit probably needs to be replaced

If you need further help, I’m available over the phone at https://www.6ya.com/expert/justin_3ae27a9d61d6acd4

0helpful
1answer

How do I stop the beeping of smoke detector after battery has been replaced?

How old is it? It may be telling you that it's no longer reliable and must be replaced.
0helpful
1answer

My system sensor keep chirping after we took it down

Time to remove that battery; discard the unit; and replace it.
Aug 24, 2014 • Home
0helpful
1answer

Simon XT "system low battery"

IT might be testing ok, but you need to load test it. It could be the charging circuit but in most cases the battery will show a surface charge that is ok for a short period of time.
0helpful
1answer

My alarm is disconnected entirely from the ceiling, the batteries have been changed, and new units have been placed (and now removed) in the position of the beeping... but our ceiling is beeping (not the...

Human hearing is not really all that great, especially directionally. Look for the sound to be coming from some other place and bouncing. Check for plug-in CO detectors as they are often the culprit. Try using tape to muffle the sound ports until you find the correct device. Good luck!
5helpful
1answer

We had a power outage for about 45 minutes a few days ago. Ever since then the Powerware 3110 has been beeping. I turned it off and left it plugged in overnight and when I turned it back on the beeping...

This could be several things, fortunately the device should actually be helping you to diagnose the issue. There are different beeps for different issues. They are as follows:

1 Beep Every 5 Seconds = Power Outage\Loose Plug Connection\Tripped Circuit Breaker\Power Cord Damage or Failure

2 Beeps Every 5 Seconds = Low Battery Alarm

3 Beeps Every 5 Seconds = Battery Needs Charging\Service\Replacement

3 Beeps Every 5 Minutes = The Battery is discharged and battery power is unavailable (If this continues battery replacement may be necessary)

1 Beep Ever 1/2 Second = Power Requirements exceed the UPS Capacity (remove some equipment to lighten the load on the unit)

Continuous Beep = Short Circuit / Input Voltage out of Range / UPS Fault (Likely replacement of entire unit)

That should help diagnose the actual issue. If it turns out the battery needs to be replaced they can be found online for around $20. A simple google search for Powerware 3110 Battery should return what you're after. Good luck!
0helpful
1answer

GA-MA790GP-DS4H doesn't boot. It gives 14 short

Hello my friend,
There is no way to have 15 beeps error especially short ones so
First try to count the beeps and if are long or short

0helpful
2answers

My lap top beeps and will not recoognise the keypad buttons

You may have a bad memory stick or your os may need to be reinstalled.

Try removing battery, press and hold power button for 5 seconds and then put back in and turn on and see if it works then.
Not finding what you are looking for?

1,128 views

Ask a Question

Usually answered in minutes!

Top System Sensor Home Experts

john h

Level 3 Expert

29494 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66957 Answers

Are you a System Sensor Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...