Question about HP PSC 2210 All-In-One InkJet Printer
HP PSC 2210 InkJet Printer. The following has to be done for checking the Blank Ink Catridge working : 01. Remove the existing Black catridge and Color Catridges from the Printer carefully. 02. Clean the location with a soft cloth with cleaning liquid to make the place dust free. 03. Put the correct black and colour cartridges recommended by HP and that too genuine one. 04. Do not use any refilled or reinked local catridges that will spoil the HP PSC 2210 printer. 05. Re-install the catridges both Black and Colour properly. 06. Take a test print out - both black and colour print outs. 07. Check the Printer status and there is no warning of Cartridges wrongly inserted. Have a Good day.
Posted on Jul 17, 2009
Remove the catridge and wipe clean the sensors with a damp cloth preferably soaked with a little methylated spirit and replace. it should be fine.
Posted on Jul 14, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: error - cartridge incorrect
Check to see if the installed cartridge is the correct one for the printer. If the cartridge is the proper part number, remove the ink cartridge and make sure all the packaging tape has been removed from the copper circuitry strip on the backside of the cartridge. Reinsert the cartridge and try printing again.
If the error continues, remove the cartridge again and clean the copper circuitry strip on the backside of the cartridge, and the contacts inside the printer, by following the instructions below:
1. Use a clean, dry, soft, lint-free cloth. Locate the copper-colored circuitry strip on the back of the cartridge.
2. Wipe the copper-colored strip with the dry cloth. Use an upward motion, from the nozzle end to the top of the cartridge. Do not wipe the nozzle end of the cartridge or touch the nozzle plate. Wipe the contacts only once.
3. To clean the printer contacts, carefully look for fibers or contamination on the electrical contacts inside the carriage assembly, but do not wipe the printer contacts with any object. The contacts in the printer can be damaged if too much pressure is applied during a wiping process. Try to remove any visible attached debris within the carriage assembly by gently pulling the debris off with your fingers. If the carriage contacts show noticeable damage, contact the HP Customer Care Center listed in the printer's User's Guide.
Reinsert the cartridge and try printing again. If the error continues, the cartridge may need to be replaced.
Hope this helps. Please rate my response.
Have a good day.
Posted on Mar 16, 2010
Tips for a great answer:
Jun 27, 2011 | Office Equipment & Supplies
Jun 16, 2011 | Lexmark X6650 4-In-One Wireless InkJet...
Jun 12, 2011 | Dell 946 All-In-One InkJet Printer
May 11, 2010 | Dell 946 All-In-One InkJet Printer
Dec 24, 2009 | Dell 922 All-In-One InkJet Printer
Jul 19, 2009 | Dell 924 All-in-One InkJet Printer
May 13, 2009 | Lexmark X7170 All-In-One InkJet Printer
Jan 03, 2009 | Lexmark X9350 All-In-One InkJet Printer
Sep 29, 2008 | HP PSC 750 All-In-One InkJet Printer
Jul 08, 2008 | Dell 922 All-In-One InkJet Printer
450 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: