No sound; it sudeenly went out - Hitachi Televison & Video

Check the display settings.

Did this happen after you refueled? Could be water in gas line.

body control module is fried

Hi,

Uninstall audio drivers completely and then install the driver that is working.

1. Click Start,type Device Manager in the Start Search box, and then pressENTER.

2. In the Device Manager dialog box, expandSound, video, and game controllers.

3. Locate the audio device that was included with the computer.

3. Right-click the device, and then clickProperties.

4. Click theDriver tab, and then click Uninstall.

5. Place a check mark next to"Delete the Driver Software for this device" check box, and then click OK.

6. Install the driver that is working.

7. Restart the computer and check if the issue persists.


Hope this helps

hello, every digital camera has its supported format (ex:- MOV, MP4 and etc), you will find this in the instruction manual. other than the supported format the camera will not play any other file. so the camera will not play files if it is not the right format even though it plays on the computer. :). if you need to play them you need to convert them to camera supported format and then load it into the camera.

Check whether or not there is any debris in the docking station connector. Be careful NOT to use a metallic object to remove any debris, since you risk shorting-out a connection and killing your system board.
If that does not resolve the issue, then something has failed within either the laptop or the docking station.
One thing for certain, it sounds as if your battery has reached the end of its usable life and you'll need to buy a new one and recycle the old one.

try swapping out the power supply, ibm usually has them **** out every now and then, other than that make shure your heatsink is clean and that all your vents are clean and unblocked

This problem can be repair, its only the vertical sect..have defective capacitor or lose/cold solder. by resoldering the area sometimes will solve this.

dam that suks for u i used alot of money on that camera

Sorry to hear that!
The only thing I would sugest is to pull the battery (and leave it out for 24 hours (or longer)) to try to reset the camera. But I would guess that the LCD stoped working and the white screen you see is the back lit screen mounted behind the LCD.