Question about Karcher G3025OH Pressure Washer

1 Answer

No pressure / Karcher G 2400 HH

Good Afternoon...I have a Karcher G 2400 HH and I don't have any pressure and I've tried mostly everything I was told except the unloader valve...where is this located? I don't have the manual. Thank you

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 174 Answers

Hi ruthkapres:
Here is a diagram. The unloader/spill valve is #12 on page D2 or F2 depending on your model. You must pull it out, inspect the o-rings for dents or tears and make sure the valve is lubricated with a good water proof lubricant.

Posted on Jul 15, 2009

  • 2 more comments 
  • lrmaher Apr 17, 2011

    I have soaked the valve for 24 hrs with no luck removing the valve. It acts as though there is a snap ring keeping it from coming out. Any other suggestions? Thanks

  • firehead Apr 17, 2011

    If we have the correct model, there is nothing holding it in except burnt rubber and/or lime and/or rust. I have had to replace the entire piston guidance (#4)

  • Aron Kerr
    Aron Kerr Apr 05, 2012

    A good trick to get these out is to use your garden hoses pressure to push the valve out from the inside. Hook your machine up as you normally would. Cover the opening for the spill valve with you hand and turn on your garden hose. This will normally push the valve out of the pump.

  • Aron Kerr
    Aron Kerr Apr 05, 2012

    Also if you need detailed instructions on repairing this issue please see the following link to a detailed walk through that was released to all Karcher dealers a few years ago.
    http://www.landanorthwest.com/knowledgeb... Valve Instructions for K Series Machines


    Sincerely,
    Aron Kerr
    Landa Northwest
    www.landanw.com

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My karcher 645 has three lights on the right side of the control panel. The bottom one that looks like a heater temprature warning light keep flashing when im using the machine. Is this normal or do i have...


I'm not a karcher dealer, but I'll comment. I'm assuming you've misplaced your owner's manual -- so the only way you'll know for sure is to contact karcher.com..... or a dealer.

That said, I'm pretty sure your blinking light is just bells and whistles kind of stuff. It most likely is a reminder that its time to change the diesel filter. Which means it has some "re-set" procedure. I just wouldn't worry about it.
Don

Mar 07, 2012 | Karcher Garden

1 Answer

I'm doing some repair on a Karcher model K 2400 HH. Are there any repair manuals or diagrams for them? I have been on many websites including the Karcher site and can find nothing. I know they want you to...


I find this link and gives a good breakdown of Karcher PW in ALL PARTS. It does not have K 2400, but try this link for K240. You can tell whether it covers your machine or not.

http://www.pressureparts.com/TreeView.aspx?node=71067&node1=72670&node2=76096&anchor=76096#76096

Mar 30, 2011 | Karcher Garden

1 Answer

I have a K2400 HH pressure washer. When I started using the machine this year, the pressure would last for a moment or two than quit. When I would shut off the pressure and wait a few minutes and start...


sounds like a weak or worn out unloader valve spring.



MODEL DESCRIPTION PRICE SN-060-216 Pressure SpringKarcher/53323910 $5.90cart.gif


You can find parts online through Karcher or Ebay if you wish.

I hope this helps!

Feb 23, 2011 | Karcher Garden

1 Answer

Unloader Valve - Karcher Pressure Washer


where is the unloader valve locaed on a Briggs Stratton pressure washer?

Oct 02, 2009 | Honda Karcher G4000RH Pressure Washer

1 Answer

I have a coleman powermate 2400. It started fine


Did you try a new spark plug. Old one may have fouled.

Jun 25, 2009 | Karcher 2500 PSI Pressure Washer

1 Answer

Pressure washer that leaks oil through the air breather


Most likely your air filter is plugged or dirty, or the crank case vent valve needs to be cleaned.if it still does it check that the oil level is at the full mark, if overfilled it would cause the same problem.

Jun 22, 2009 | Karcher 2500 PSI Pressure Washer

1 Answer

I have a karcher 2400 psi pressure washer and it doesnt get water pressurized when pulling wand trigger.


the most comon problem with thease is a stuck bypass valve, this is the valve that alowes the water to bypass round the pump when the triger is closed, when they stick all of your pressure runs around the pump and not out of your nozzle,,
its located in the centre of the pump on the top, undo the 2 cap screws pull out valve greese and re fit

Jun 08, 2009 | Honda Karcher G2400HH-R Pressure Washer

Not finding what you are looking for?
Karcher G3025OH Pressure Washer Logo

Related Topics:

1,850 people viewed this question

Ask a Question

Usually answered in minutes!

Top Karcher Garden Experts

John Trevino

Level 3 Expert

1388 Answers

Harold Baxter

Level 1 Expert

4 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Karcher Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...