Question about Belkin (F5D8231-4) Wireless Router (F5D82314)

1 Answer

My wireless router cannot connect to my new server modem.

My wireless router model number is F5D8231-4. It I moved it from my old house to to my new house and it stopped comminicating with my modem. I receive my internet Time Warner cable via cable.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 60 Answers

Try to power cycle the network.

1. Power OFF the router then modem
2. Wait for 5 minutes
3. Power ON the modem first and wait for the light to be steady.
4. When the lights are steady on the modem, turn on the router.

Posted on Jul 16, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Craig tablet cmp741e


This can be caused by a number of issues most have to do with the router itself and not the tablet. First, let's make sure the router DHCP Server is not frozen so take the following steps:
Step 1: If the router is separate from the Cable or DSL Modem, power down the router/wireless, next power down the cable/dsl modem. Power up the cable/dsl modem wait 60 seconds then power up the router/wireless wait 2 minutes
Step 2: Try to connect to the wireless
Step 3: If you have a modem or wireless router supplied by Comcast, Verizon, AT&T or any major carrier, contact them asking them to walk you through resetting and rebooting and updating the firmware to the router/wireless.
Step 4: After the reset and update try to connect, if it fails move on
Step 5: Log into the wireless/modem - let's change the wireless encryption. Go to the wireless settings, change the wireless settings to WPA Personal and add any pass-phrase. Try to connect using the new pass-phrase.
Step 6: If you still can not connect, as a last resort switch the wirlesss encryption to WPA for testing. Try to connect, if this works contct the vendor and have the modem replaced.

Jun 08, 2013 | Curtis Klu 7-inch Touch Screen Mobile...

1 Answer

We are moving and need the MP530 to operate wireless and wish to buy the interface through the router; does a (say) five year old MP530 support a wireless interface?


This model printer has only an USB printer connection.
To connect this printer to a wireless network, you need additional equipment, a print server with an USB pirnter connection and then connect this printer server to a wireless router using a LAN cable.
It may be easier to purchase a new printer with wireless connectivity.

Jun 09, 2011 | Canon PIXMA MP530 All-In-One InkJet...

1 Answer

After moving to a new house/ new state, I can not get my HP 2035n to connect wirelessly to the router. It will print from any of our computers, but must stay connected to the router. I can find no...


The HP P2035N doesn't have a built-in wireless ethernet connection. It has a wired ethernet port. To connect to a wireless router, you need the HP Jetdirect ew2400 802.11g Wireless Print Server or the HP Wireless Printing Upgrade Kit or a similar device (note: not all third-party wireless print servers will work with the HP printer). Did you have something like this and misplace it during your move? If you did, try to find the print server to use the wireless option. Otherwise, continue wired ethernet option since it is working.

HP support for the printer (manuals, set up infomation, and drivers) is available here: http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=3662025&lang=en&cc=us .

I hope this helps.

Cindy Wells
(HP models with a W at the end of the model number have wireless capabilities without any additional hardware.)

Apr 30, 2011 | HP P2035N LaserJet Monochrome Printer

1 Answer

I installed a new Netgear wireless router. My old G router didn't cover the whole house, so I got a N600 N/G router. My Acer 5610 hooked up the the old router with 128 bit WEP encryption fine, as did my...


This could be a few things. all are simple settings.

If you can see other computers but can't get out, your acer needs the gateway ip number. If you are running DHCP this should be automatically set but you can also manually edit the IPV4 settings
TCP/IP and add the gateway as well as the other settings. The gateway is the ip# of your router that is connected to the cable modem or the dsl modem.

As long as you don't have the number range set you can fairly safely add any number in the allowable range. So you could edit the tcp/ip settings with something like the following:

adress: 192.168.2.25
netmask: 255.255.255.0
gateway: 192.168.2.1 ** insert actual addy of router.

DNS servers can be found on your isp's info page. You can use any dns server that will let you connect. Without the dns you won't get out on the net either unless supplied by DHCP.


Jul 30, 2010 | Acer Aspire 5610-4648 Notebook

1 Answer

Game server and my IP address


First option is to forward ports where your friends can connect to. The second option is to put your computer in DMZ. These options can be found on the router settings.

Jun 17, 2009 | Apple AirPort Extreme Wireless-N Wireless...

1 Answer

Router lights are blinking - no connectivity


is your router in range. When I moved I had to get an atena to get a good signal. walls were thicker.

Jun 09, 2009 | D-Link DIR-625 (790069292637) Wireless...

1 Answer

Does a router or combo need to be connected to computer?


As you already have the modem you only need a router. In all cases the modem connects to the WAN port on the router.

I think your best bet surely would be to go for a wireless router though? Then you wouldnt have to trail ethernet cables all round the house. I'm sure your laptop has a wireless adaptor built in unless it;s very old.

I always use Netgear networking stuff so forgive me posting a link to a nice 54G wireless router :-) :

http://www.amazon.co.uk/Netgear-WGR614UK-Wireless-Cable-Router/dp/B0000C1WO2#moreAboutThisProduct


Dec 27, 2008 | Toshiba PCX 5000 Wireless Cable Modem...

1 Answer

Unable to setup wireless print server with wireless router


The issue was the wireless print server not properly connecting to my home network and thus being unable to see my modem/network. This was because my linksys wireless print server generates its wep key with a different algorithm than the Motorola surfboard SBG900, this also explains why when I was using my old linksys wireless g router, things worked without any issue (same wep key algorithm). Once I figured out how to manually configure the print servers wireless settings and manually enter the wep security settings I was able to connect to my network and the configuration found the print server and I was able to finish setup.

Nov 27, 2008 | Linksys WPSM54G Print Server

1 Answer

Setting Up a Wireless Network


You can still use your existing Linksys router with your cable modem. In fact the router your have is designed to work with DSL/Cable Broadband connections.

1. Make sure to properly connec the devices in your network. Modem will be connected to the Internet port of the router. Then, laptop will be connected to one of the 4 Ethernet ports of the router. For initial setup of your router with modem, you need to hardwire laptop to the router.
2. Press and hold reset at the back of the router for about 15 seconds.
3. After 15 seconds turn off the router and then turn off the modem. Wait for a minute.
4. Power on modem and wait for the lights to be ready.
5. When modem lights are on, turn on router.
6. There should be 4 lights on. Power should be steady green. Internet, WLAN and Ethernet port.
7. Checked if you have Internet connectivity on your laptop while it is wired to the router.
8. If Internet is working, disconnect laptop from wired connection to the router and check available wireless network that laptop can detect.
9. The default wireless network name that the Linksys router broadcasts is "linksys". Connect to it which is an unsecured wireless network.
10. Once you are successfully connected, check Internet.

Hope this helps!

Nov 16, 2008 | Linksys Wireless-G Broadband Router

4 Answers

D-Link DP 311U wireless setup


Had same problem. Got it to work!!
I have DLink DP-311U and 2Wire Gateway router/modem 2701HG-B.

Solution: Connect DP-311U to router via network cable.
Then you can see it either with PS Admin or with browser http://192.168.0.10 should be default IP address of DLink Print Server. Set Connection Mode=Infrastructure, ESS-ID=2WIRExxx (xxx is your number of the router) - this is your network name, and wireless channel=1.
And the most important - change your IP Address to 192.168.1.xxx - xxx=choose a number over 64 if it's not taken already.

On your Gateway page: http://gateway.2wire.net/xslt?PAGE=J46&THISPAGE=A02_POST&NEXTPAGE=J46
Set Network Name=2WIRExxx, WIreless Channel=1, enable SSID Broadcast, Disable wireless network Security.

Once you get those numbers in, check connectivity with above programs with cable connected, or typing new print server IP address in browser. Then disable cable and check again. You should be able to see the box. Then connect print server to printer and make sure your printer settings on computer point to new IP address.

Feb 09, 2008 | D-Link DP 311U (DP-311U) Print Server

Not finding what you are looking for?
Belkin (F5D8231-4) Wireless Router (F5D82314) Logo

228 people viewed this question

Ask a Question

Usually answered in minutes!

Top Belkin Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18402 Answers

Are you a Belkin Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...