Question about D-Link DI-604 4-Port Cable/DSL Router (DI-604) Broadband (di-604 (dont quote)) Bridge

2 Answers

I have been using my D-Link DI604 router for sometime together with a D-Link Modem DSL-300T. The modem is fine but suddenly the router isn't working properly. When I turn it on the usual lights come on but after about 10 seconds just the Power and the number 4 light stay on. I am unable to acces it at 192.168.0.1. Do I have a hardware failure or is there something I can do to rescue it?

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 13,433 Answers

To fully reset the router, hold down the reset button for atleast 30 seconds.

Note that your network cards ipaddress needs to be changed to the right range for the page to open.

ifyour router / modem manual says the default ip is 192.168.0.1 then youwill need to set your computers ip to the same range, 192.168.0.5 /255.255.255.0 for example.

instructions on how to set your ip are here
http://www.home-network-help.com/set-ip.html

ones you have been in the router, remember to restore the ip to automatic so you have internet access when it works again.

Posted on Jul 15, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,383 Answers

Reset your router
Press reset button for 10 seconds it is in back side of router.
then access it with following link

http://192.168.1.1
or
http://192.168.0.1


Posted on Jul 14, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I can't access the adress to the modem (192.168.1.1) It only sais that it does not respond... How do i access it?


change the address to 192.168.2.1 this is the standard for most modems. you will have to log in to make changes just push submit to use no password.

Jan 26, 2011 | D-Link DSL-300T Modem

1 Answer

Dna-a211-1-adsl 2-for-bsnl-broadband CD Download


I HAVE A DNA-A211-I BSNL MODEM. I RESET IT CONTINUE 4-5 TIME AND AFTER RESET IN MODEM DSL AND WLAN IS NOT WORKING AND MODEM IS NOT CONNECTED TO MY PC. I USE WINDOWS 7 HOME PREMIUM. RESET BUTTON IS NOT WORKING. SO PLS SOLVE MY PROBLEM.

Oct 21, 2009 | D-Link DSL-300T Modem

1 Answer

Lost my password for d-link dsl300t how do i fix


You just need to press RESET button on the back of the router. THis will reset router back to factory settings. then open internet explorer and type in address 192.168.1.1 - press enter key. THis will bring up the login screen for router
Default login and pw are
Login: admin (or maybe Admin)
Pw: admin (or maybe Admin, or blank)
Login and setup router

Oct 16, 2009 | D-Link DSL-300T Modem

2 Answers

I went from a ATT dsl modem to a net gear modem and i cannot get the net ger mode and linksys mode to talk to the computer


Most DSL providers use PPPoE (Point-to-Point Protocol over Ethernet) to establish Internet connections for end-users. To set up a Linksys router, you need to enable PPPoE on the router’s web-based setup page.
To setup a Linksys router with a DSL connection you need to perform four steps:
  1. Verifying Internet Connection
  2. Connecting the Devices Together
  3. Checking the LEDs
  4. Setting-up a DSL ISP on a Linksys Router
Verifying Internet Connection
Connect the Broadband modem to the computer using an Ethernet cable without the router installed and make sure that the Internet connection is active. If not, contact your Internet Service Provider.

Aug 01, 2009 | Linksys Wireless-G Broadband Router

1 Answer

Dlink router error 103


i cant open any video online , like see any movies or and signal online , it is give me erroe 103 how i can do it

Jul 03, 2009 | D-Link DSL-300T Modem

1 Answer

Dlink 2640b cannot get both internet and dsl to work together


Unplug both devices,and remove the cable/dsl line input to modem, wait 5 minutes, plug cable back it, then turn on modem, wait a minute, then plug in router.The signals should mesh.If not, buy a new router, theyre cheap!~

Dec 14, 2008 | D-Link ADSL2/2+ Modem/Wireless Router...

1 Answer

I lost the CD Driver


try the driverguide.com or check the manufacturer website for driver in the support or download section

Nov 08, 2008 | D-Link DSL-300T Modem

1 Answer

Speedstream 4100 does not work with router


you can't.
when the item name as modem/router. it means the main function is modem with added router function.
you can't connect 2 router/modem together. both need access to the internet and IPS for it function correctly.
however, you can connect 1 modem and one router.

Oct 19, 2008 | Siemens SpeedStream Modem (4100) (SS4100)

1 Answer

Lost internet connection


Change the calbe from the router to the dsl modem. Make sure you check labels on the rear of these devices to make sure the connections go where indicated. Is there and ethernet light on your modem. If that is on then the connection is made. Also check if the DSL modem works directly connected to the pc.

Jan 06, 2008 | Trendware TEW-452BRP Wireless Router...

Not finding what you are looking for?

Open Questions:

See all D-Link DI-604 4-Port Cable/DSL Router (DI-604) Questions

D-Link DI-604 4-Port Cable/DSL Router (DI-604) Broadband (di-604 (dont quote)) Bridge Logo

Related Topics:

415 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18408 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...