I have a Imagen runner 3300, and it has a error 354, i dont know what is, this error is not in the manual service. help !!!!
E354
•When turning ON the power, inconsistency of the serial No. of
the serial number PCB and that of the controller PCB
(SRAM)/counter memory is detected.
•When turning ON the power, it is detected that no serial
numbers are assigned to the serial number PCB and the
controller PCB (SRAM)/ counter memory , if you are try to change the counter pcb to get rid of high meter reading this error is possible, this a security measure of canon to prevent meter tampering
OR
Sol 2) Open the display unit of your copier and take it for dry soldering.
Note:- expert help may be required for step 2. don't try yourself.
1,724 views
Usually answered in minutes!
×