Question about HP Officejet 6310 All-In-One InkJet Printer

1 Answer

Reset power on HP 6310xi...and gettings worse

I orignially had the "reset power" message on the screen with all the buttons flashing. I tried the following three steps and now have a new problem:

held # and 3 while plugging power back in.
held # and 6 " "
held # and 9 " "

Now the screen is blank and the "camera" light on the front of the printer by the ports keeps flashing. I'm getting nothing.

Posted by on

  • rdunn22 Jul 14, 2009

    Is there anything that I can do now?

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 27 Answers

#9 will actually delete the firmware on your printer from the sounds of it you unfortunately fried the hardware
try doing a #6 but never do a#9

Posted on Jul 14, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to factory reset the hp pro 300 laserjet printer


1. Power down the printer
2. Press and hold the lower left hand corner of the screen
a. This is normally where the progress bar starts loading on the screen
3. Power on the printer
4. Release the left hand corner once the "Permanent Storage Init" message appears.


or alterative way
1. Power down the printer
2. Press and hold the right arrow button on the navigational bar
a. This button will flash for a moment when the printer boots up
3. Power on the printer
4. Release the left hand corner once the "Permanent Storage Init" message appears.

Jul 14, 2016 | HP Office Equipment & Supplies

2 Answers

Printer trouble


Try following this steps:

Disconnect the Universal Serial Bus (USB) cable from the back of the product, but leave the product turned on.
Open the cover of the product and remove the print cartridges.
Close the cover and wait for the Insert Ink Cartridges message to display.
Disconnect the power cord from the back of the product and wait for one minute.
Reconnect the power cord. If the product does not automatically turn on, press the Power button.
Open the cover and reinsert the print cartridges.
Close the cover. If prompted, print a calibration page.
Reconnect the USB cable, and try to print a print job from the computer.

Hope that helps........

Aug 09, 2008 | Office Equipment & Supplies

1 Answer

Laptop hp cq62 not start, black screen. after pluging ac cord he start itself, and after that, it is impossible turn it of.


You can generally only flash a bios if you can get the machine to boot up into some operating system. Do you get ANY on-screen logos or messages when you apply power to the laptop? Can you get into the bios when you power up the laptop and press Esc (or F2 depending on your model)? Do you hear any sequence of 'beeps' when you power up the laptop? A series of short/long beeps when powering up indicates some kind of error detected by the Power On Self Test (POST) routine. Do you have the HP recovery CD for your laptop? Have you put it in your CD Rom drive and tried to boot up? Check the manual at HP Support for a hard reset procedure- you could have a bad power button board or other hardware problem-it is not usually a BIOS problem.

Jan 28, 2015 | HP Computers & Internet

1 Answer

For the HP 6310xi printer I almost always get a solid cartridge error-replace cartridge message after printing only a few (about 20-25)pages. Is there someway the cartridge can be reset on these remfg...


Ok well Rmfrg cartriges tend to have that problem . And no there is no way to reset the cartridge it has something to do with the print head electronics.

Aug 31, 2009 | HP Officejet 6310 All-In-One InkJet...

1 Answer

I also have HP 6310xi all in one printer with power reset message


1. Please make sure that the power adapter is working properly. Also connect the unit to a different power outlet and verify.

If the issue persists, please perform the following steps:

Step 1: Power Reset:

1. Disconnect the unit from the computer. Verify that the unit is switched ‘on’. Unplug the power cord from the back of the unit.

2. Wait 30 seconds.


3. Plug-in only the ‘power cord’.

4. Repeat steps 2-4 two more times.

5. On the third time after plugging the unit into power, reconnect the connection port from the all-in-one to your computer.

If the issue persists, perform the following steps:


1. Take the cartridges out of the unit. Unplug the power cord from the unit.

2. Press and hold # and 3 buttons together while plugging in the power cord back to the unit.

3. Turn on the unit and insert the cartridges.

This will solve the problem...

Jun 23, 2009 | HP Officejet 6310 All-In-One InkJet...

1 Answer

Reset power


To do partial Reset.

1.Unplug the power cable and turn off the the unit.
2. Press and hold # & 3 at the same time with out connecting the power cable.
3.While holding the button,connect the power cable and do not the release button for 5 sec.
4.Then turn ON the unit.

To do Semi full Reset.

1.Unplug the power cable and turn off the the unit.
2. Press and hold # & 6 at the same time with out connecting the power cable.
3.While holding the button,connect the power cable and do not the release button for 5 sec.
4.Then turn ON the unit.

To do full Reset.

1.Unplug the power cable and turn off the the unit.
2. Press and hold # & 9 at the same time with out connecting the power cable.
3.While holding the button,connect the power cable and do not the release button for 5 sec.
4.Then turn ON the unit.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

May 30, 2009 | HP Officejet 6310 All-In-One InkJet...

1 Answer

Printer Error Message HP AIO 6210 printer


Hi

If you find the lights flashing, we could try resetting the printer.I have explained the reset procedures below

POWER DRAIN:-Turn off the printer, Unplug the power cable from printer and from the wall outlet.Press and hold ON buton for 30-60 seconds.


PARTIAL RESET:-Unplug the printer power cable while its ON, press and hold # and 3 button and connect the Power cord while holding.Wait untill the ON light flashes, then release the buttons.

----(for below reset cartridges must be removed out)---------

SEMI_FULL RESET:-Remove the ink cartridges, Unplug the printer power cable while its ON, press and hold # and 6 button and connect the Power cord while holding.Wait untill the ON light flashes,or wait for 20 seconds,hen release the button.If the printer goes off dont worry release the button and Push the ON button.


FULL NVM RESET:-Take the Ink Cartridges out, Unplug the printer power cable while its ON, press and hold OK and CANCEL button and connect the Power cord while holding the buttons.keep Holding the buttons until the printer goes off ,release the button and Push the ON button.

Thanks
Riz

Jan 10, 2009 | HP OfficeJet 6210 All-In-One InkJet...

3 Answers

Pwer Reset


My HP 6310xi printer reset power screen keeps flashing. How do i reset it

Aug 13, 2008 | HP Officejet 6310 All-In-One InkJet...

4 Answers

Printer trouble


Power cycle the printer. If problem remains, try a partial reset. You can do the partial reset as follows:
1. Unplug and replug the unit.
2. when lights flash on power up, hold down the ON/RESUME and PAGE SIZE buttons together.
3. When only the ON/RESUME button light flashes, you can release the buttons.
4. When the lights stop flashing, the reset is all done!

If problem remains, you are fully justified to ask HP to replace the unit for you (well, if you're still in warranty!). Good luck :)

Jan 18, 2008 | Office Equipment & Supplies

2 Answers

Ipaq 2490 hangs on booting


Try this:
4. Make clean reset (hold callendar + itask, then press and hold reset), after about two seconds you will hear knack. Now unhold these buttons. The screen will be black.
5. After that make hard reset (hold callendar + messaging + power and then press and hold reset) after about two seconds unhold reset button first and after about one seconds remaining buttons. You will see on screen PS FORMAT.
6. Now is you iPAQ ready.

Nov 24, 2007 | Computers & Internet

Not finding what you are looking for?
HP Officejet 6310 All-In-One InkJet Printer Logo

530 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...