Question about RCA HD52W59 HDTV Projection Television

1 Answer

Set up Want to install VCR DVD and Satellite on the HD52w59 Television.What is the best way

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 112 Answers
Re: Set up

Use your comp1 and 2 if they are HD and use video 1&2 if they are not.

Posted on Dec 18, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer


Where the power cord comes into the set--the most common issue with this set is bad solder connections under the High voltage transformer.

see photo of this (typical one) part.


Dec 21, 2012 | RCA HD52W59 HDTV Projection Television

1 Answer

My RCA HD52W59 problem

set is prone to two problems: high voltage splitter at front of set behind speaker grill arcs-------also set does have parts on HV board that do the same thing---HV transformer feeds voltage to the splitter.

Jun 07, 2012 | RCA HD52W59 HDTV Projection Television

1 Answer

Picture on screen is too big head of people are cut off it does not show complete picture

Use your cable or satellite tv remote to adjust the aspect ratio. If you have cable there is a button on the remote called hd zoom and it has this symbol: #. On the satellite tv remotes it usually says format or aspect. You might even have to go into the cable box/satellite tv receiver menus to adjust the aspect ratio/picture format. Once you have done so you can fine tune the picture even further with the television remote's wide/format/aspect/zoom button. Also check and make sure your television is on the right input and that your cable box/satellite tv receiver is set at the right resolution for the television 1080p/1080i/720p.

Jul 12, 2011 | RCA HD52W59 HDTV Projection Television

1 Answer

I have a RCA HD52W59 but i cant find a hdmi. What do i do?

Used a S-Video cable for video hook up and a RCA component Red,White cable for a audio output hook up.Or used a all in one RCA component cable Yellow,Red,White for a hook up as a simular hook up for traditional VCR hook up before.

May 28, 2011 | RCA HD52W59 HDTV Projection Television

1 Answer

How do I setup my cable on this television set?

If you are running cable straight from the wall, all you need to do is connect it to antenna, go into your user menu to channels or set up, and the set will auto program. If you are using a cable box, just connect it to what ever input suits you the best and leave the set tuned to that input.

Apr 04, 2011 | RCA HD52W59 HDTV Projection Television

1 Answer

Picture is scrambled after power surge. Have a

Check if it has a scrambled image on all sources ie - DVD- VCR - cable/satellite box. Since the PIP is normal it sounds like the signal source is bad.
Post back with more info about your set up (what's hooked to your TV) if you need more info

Nov 28, 2009 | Samsung HL-R4667W Rear Projection...

1 Answer

Turn on goes blue then turns off

The most common reason for a TV to display a blue screen with no picture is because the source device has not been set to the proper mode.

If you are using a cable or satellite set-top box, ensure that it is turned on and set to an active station. If the set-top box is connected to the television using a coaxial cable, then the television should be set to Channel 3 or 4 to receive the signal.

If you have are using a VCR that is turned on, but not playing a tape and not tuned to a receivable channel, then a blue screen will be displayed on the TV. To resolve this, turn off the VCR or tune it to a receivable channel. If a cable or satellite set-top box is connected to the VCR using a coaxial cable, then the VCR should normally be set to Channel 3 or 4 to receive the signal.

If the blue screen is not because of a connected VCR or set-top box, the TV may require service.

Sep 22, 2009 | Sony KP-57WS500 57" Rear Projection...

1 Answer

Picture goes black but sound is good after tv is on for 10 minutes, please help

Please check if exchancing powercord helps and preferably to other power connection.
Do check your signal generating device
Antenna - RF ?
Set top box (Cable or satelite)
DVD or VCR for broken connection.
They could be the cause also and not the TV.
A broken soldering on a euroscart connectort is treaseurous on a VCR or so. I open those up and check scart connectort on board solderings or check cable for loose connections.

If nothing there or you not technical enough call in a handy guy from the block before cleaned out.

Pls do not open your TV set, that gets ugly.

You like my advice, rate me, i am doing my best

May 06, 2009 | RCA HD52W59 HDTV Projection Television

1 Answer


try this When the unit is unplugged and replugged, it empties these registers of the corrupt data.
fix is to place a 1mfd capacitor to ground on U13101 pin (15). This
swamps the closed caption data to the micro and stops the reception of
the defective data packet. In the event that later on the resolve the
defective data problem the capacitor can be removed. the close
caption feature will not work with this cap. installed

Dec 29, 2007 | RCA P52937 52" Rear Projection Television

1 Answer

Language Selection

I had that happen. I found out that I had the VCR turned on. So I turned that off and The language select went away.

I was connected from satellite to VCR then TV.

Nov 14, 2007 | RCA HD52W59 HDTV Projection Television

Not finding what you are looking for?
RCA HD52W59 HDTV Projection Television Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Projection Televisions Experts

The Wyzzyrd

Level 2 Expert

83 Answers

D. E. Hev

Level 3 Expert

1059 Answers

Ron Dufek
Ron Dufek

Level 3 Expert

398 Answers

Are you a RCA Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides