Question about GE RM24930 Remote Control

1 Answer

Remote no longer works

I thought the batteries were dead and replaced them but the remote will not control my TV, or DVD/VCR since "someone" messed with it. I thought it was the batteries but even with new ones, nothing. The red indicator light comes on indicating it's getting power but there's no response. I can't get my TV to the AUX mode in order to watch DVDs or VHS tapes.... HELP!!!

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 111 Answers
Re: Remote no longer works

The manual for this remote can be found on this site
unfortunately i do not have a code list for this remote, but you should be able to use the code search function to get everything working again.

hope this helps,

Posted on Nov 17, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How do I program the Toshiba CT-90325 remote to control the Toshiba SD-V280 VCR/DVD player?

If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common codes used for devices too are given, in the order of device brand name list in alphabetical order. Do a search by type in the brand name of your device, at its search box, and press "Enter". Or, pull up older posts.

Jul 23, 2014 | Toshiba Original CT-90325 TV Remote...


Why Am I Unable To Program The RCA Remote Control To Operate My Components

Why am I unable to program the RCA remote control to operate a component? Why am I unable to program the RCA remote control to operate a component? If you are unable to program the remote control to operate a component, review the following information:

If none of the programming procedures work, the universal remote control may not be compatible with your components, based on the type of infrared technology and the age of the components. Some RCA universal remote controls will only work with components manufactured after 1990.

If you are testing the remote control after you have entered a code, you may be too far away from the component or you may not have the remote control aimed directly at the component. Because the remote control uses infrared (IR) technology to communicate with components, there must be an unobstructed path between the remote control and the IR sensor on the component.

Code Entry Methods
If the Direct Code Entry method was used to enter the codes for your brand and the unit is still not functioning properly, try one of the automatic code search methods instead. During automatic code search, the remote searches for the correct code to program.

For the remote control to know which component you wish to operate, you must put the remote control in the correct mode by pressing the corresponding component button.

Combo Units
To program the remote control to operate combo units, such as TV/VCR’s, TV/DVD’s, or TV/VCR/DVD’s, use the combo codes in the Code List to program the individual corresponding component buttons. Once programmed successfully, the TV button controls the TV functions on your unit, and the DVD or VCR button controls the DVD or VCR functions, respectively. The codes in the combo section should be tried first, using the Direct Code Entry method on the TV and DVD or VCR buttons. If this is unsuccessful, use one of the Code Search methods to program your combo unit.

Make sure the batteries are new and properly installed.

on Jun 19, 2009 | RCA DIRECTV Satellite Remote Control

1 Answer

My remote control simply stopped working altogether. I changed batteries 3 times(and verified the batteries were good). The dvd/vcr controls on the player itself function properly. I cleaned the remote...

If it is a universal remote not branded to the tv and the batteries went dead or are out for too long then the remote lost the codes and needs to be reprogramed!

Mar 15, 2010 | Sony RMTV501A Remote Control

2 Answers

I have lost my remote

Original and replacement remotes:

Sep 07, 2009 | Remote Controls

1 Answer

Sony TV no longer responds to Harmony remote

try using some rechargeable batteries. they tend to have more miliamps and last longer.

Jan 14, 2009 | Logitech Harmony 670 LCD Remote Control

1 Answer

Dog chewed my Philips DVD remote!

Remote codes

Mar 02, 2008 | Big Button TV Universal Remote

5 Answers

Emerson remote for emerson tv/vcr combo

Emerson TV codes 0154, 0236, 0463, 0180, 0178,
0171, 0623
Emerson TV VCR Combos 0479, 1479, 1278

If your device does not respond to the remote control after trying all codes
listed for your brand, or if your brand is not listed at all, try searching for
your code.
NOTE: Before performing a code search for a DVD player or a VCR, turn on the device and
insert the required media.
For example, to search for a code for your TV:
1. On the remote control, press TV once.
2. Press and hold SET until the LED (red light) blinks twice,
then release SET.
3. Enter 9 - 9 - 1.The LED will blink twice.
4. Aim the remote control at the TV and slowly alternate
between pressing POWER and TV. Stop when the TV turns off
(after pressing POWER). If the device does not have a Power
key, you can substitute another function, such as digits 0 ~ 9 ,
CH, or PLAY).
NOTE: In the search mode, the remote control will send IR codes from
its library to the selected device, starting with the most popular code
5. To lock in the code, press and release SET.The LED will
blink twice.
6. To search for the codes of your other devices, repeat steps
1 through 5, but substitute the appropriate device key for
the device you are searching for.
here is the maual for your remote:

Nov 14, 2007 | One For All URC-3021 Remote Control

3 Answers

Lost codes for 4 in one used for universal remote control

DRC800 Sanyo TV 0799,0154,0893 Panasonic VCR 0035,0162,1062,0616,0225,1035 press device key for 6 seconds led will blink solid key in code correct code will cause led to blink 3 times press power button to confirm code works. rg

Sep 09, 2007 | Philips 8-Function Universal Learning...

11 Answers

I can't find a code.

took me awhile but I figured it out


Put your TV/DVD/VCR on
hold in what you want to program TV/DVD/VCR BUTTON
(you dont need codes or anything)
then while holding in what you want to program (TV, DVD, VCR) hold in ON/OFF
both at the same time

when the light comes on and stays on
keep hitting ON/OFF BUTTON
do it slow, when the TV turns off hit the STOP button at the bottom
then hit the button you just programed
then hit the ON/OFF button, the TV/DVD/VCR will turn on

if it doesnt work, repeat. make sure you hit the stop button when the TV/DVD/VCR shuts off, if you hit it an extra time while the TV/DVD/VCR is off it wont work.

took me about 30 mins to figure it out.

Feb 24, 2006 | RCA RCR450 Remote Control

Not finding what you are looking for?
GE RM24930 Remote Control Logo

Related Topics:

126 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Remote Controls Experts

The Knight
The Knight

Level 3 Expert

66352 Answers

Cindy Wells

Level 3 Expert

4718 Answers

Peggy Cook
Peggy Cook

Level 1 Expert

7 Answers

Are you a GE Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides