The picture seems too big for the screen. When there is writing, only about half of it shows. How do we adjust this?

It seems that the picture aspect ratio should be changed. Refer its user manual for details.

It's not an adjustment.Chances are it's your vert. output i.c.or a surrounding component.Chip # is TDA8172.

Have you tried hitting the format picture button on your remote control. Seems the picture is in zoom mode. If you have a cable box for HD Channels then look on the remote for a button (format) or Screen size.

go to menu and adjust screen size(picture size)

Hi

maybe the system settings is not set in default mode

Thanks!

I HAVE A 57" TOSHIBA REAR PROJECTION TV. HALF THE SCREEN HAS A BLUE TINT AND THE OTHER HALF IS CLEAR.

try to adjust the screen at the back of the plyback.a big parts inside the tv with a wire attach to the picture tube. thre's a two knob there, the lower knob try to adjust it

try unhooking the cable and hook up a dvd player see if the picture stays the same if it does then its the tv ,if its normal it will be in the transmitter.

Go into your service menu and try to adjust the convergence, if it does not adjust, the IC's ( chips) are bad in that circuit. Call a local factory authorized dealer to service your tv. The cost should run around $450.00. Good luck.

if anyone has this p61960 television that does not work anymore, I am looking for parts for mine and would buy, please let me know, thanks