Question about HP LaserJet 5m Printer
I've never known anyone that has "just changed a fuse" in a HP and have it spring back to life, I do know if a fuser or thermal fuse go you would still have display, I would check the switch, display connections then maybe pull the power supply out and check for damage, but in reality if got down to power supply one would write it off.
The fuser not coming on isn't a problem, missing supply voltages from power supply seem more likely.Check if fan powers on at start up.
Posted on Nov 17, 2007
Tips for a great answer:
May 11, 2014 | Ricoh Aficio 450 Copier
Dec 06, 2013 | Canon NP 6035 Copier
• Defective thermistor
• Incorrect installation of the thermistor
• Defective fusing lamp
• Defective power supply unit
You can try resetting the code using this sequence...
Press the Yellow button, 1,0,7, Press & hold red stop button until machine beeps and the display changes. Then turn the copier off and back on.
Hopefully the machine will now come to ready. OIf not the likely cause is either ther thermal fuse or heater lamp.
Hope this helps
Feb 03, 2011 | Ricoh Aficio MP 161 Black and White Copier
Mar 25, 2009 | Sharp AL-1217 Copier
Jan 25, 2009 | Sharp AL 800 Copier
Dec 11, 2008 | Sharp AR-163 All-In-One Laser Printer
Dec 09, 2008 | Printers & Copiers
Sep 18, 2008 | Sharp AR-5320 Black and White Copier
Jun 30, 2008 | Xerox Printers & Copiers
166 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: