Question about Microsoft Xbox 360 Controller
Its not registering when I try and push any and all buttons two green lights are on but nothings happening
There should be a sync button right on the top of the back of the Xbox 360 controller. While the system is on. Power on the controller. Hold down the sync button on the controller, and then press and hold the sync button on the Xbox 360 console. Wait for a few seconds until the Xbox 360 controller lights stop blinking. Then test out the controller. Any comments of questions, post them by clicking on the add more details link inside of this question that you've asked.
Posted on Dec 22, 2007
hey there sellina and biobat,
I had the same thing happen to me, if it's just two lights that flash for a moment and then turn off. It means the controller is having a hardware failure. I ended up just returning the controller and got a new one. This generally occurs in 3rd-party controllers like Mad Catz.
Posted on Dec 11, 2007
SOURCE: xbox 360 controller
If the control is blinks in sequence with the four LED light on the XBox 360 but it does not change to only one LED, being the one that corresponds to which player the control is, you need to remove the batteries from the control then disconnect power from your XBox 360. Wait a few minutes before reconnecting power to either then attempt to sync the control again. This resolves most issues.
Posted on Mar 07, 2008
Tips for a great answer:
Apr 05, 2011 | Microsoft Xbox 360 Controller
Feb 28, 2011 | Microsoft Xbox 360 Controller
Jan 16, 2010 | Microsoft MS Xbox 360 Common Controller...
Jun 27, 2009 | Microsoft Xbox 360 Controller
Jan 15, 2009 | Activision Guitar Hero II for Xbox 360...
Dec 26, 2008 | Logitech Wireless Xbox GamePad Cordless...
Jan 30, 2008 | Microsoft Xbox 360 Controller
1,318 people viewed this question
Usually answered in minutes!