Question about Yamaha HTR-5660 Receiver

1 Answer

Receiver is beginning to chirp/buzz.

This unit is about 5 years old and had performed well. Recently, there have been occasional chirping buzzing noises coming from the front channels (currently set up in stereo only configuration. Seems to be no pattern to the occurence. It's infrequent and irregular.

Posted by on

  • raqbal Jul 14, 2009

    There are no NEW sources of interference that I've been able to identify. The buzzing/chirping bursts occur mainly when watching television. Source is a digital cable box but the problem has also occured when source is a DVD player.

    I have discovered similar problem on this site and it was identified as a loose ribbon cable inside the receiver. Could that be my problem?

  • Mico Dukic May 11, 2010

    Could be interference from something. Is it buzzing no matter what source you use?

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 287 Answers

Tighted loose circuit board and rear panel screws

Posted on Jul 16, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Chirps come from ceiling not unit


Only the smoke detector will chirp. When they begin chirping it means the battery is very low and needs to be replaced. Replace it and you will find the chirping will stop as it will when the battery is totally dead.

Jan 08, 2016 | Home

1 Answer

How to fix a hard wired smoke alarm that won't stop chirping


you don't say what kind of smoke alarm you have, or what kind of chirping, so i'm assuming it's a once per minute chirp which usually indicates low battery, but can also indicate that the unit has some other problem...if the unit is more than 10 years old you should replace the entire thing (per NFPA72, the national fire code, all smoke ALARMS must be replaced every 10 years)...if this is newer than 10 years, try replacing the 9 volt battery being careful to follow any instructions that may have come with the unit or may be printed on the back, top or sides...good luck.

Oct 16, 2015 | Home

1 Answer

Single buzz every 15 minutes in house but not in laptop. I have verizon internet and phone. Happening for months now


Possibly the smoke alarm? Some newer smoke alarms send out a chirp that can go on for years.

Dec 31, 2013 | Computers & Internet

1 Answer

1996 Kawasaki VN 800 Vulcan Classic makes a chirping noise


Hi, Mike I would love to help you with your engine or chassis noise but I just loaned my brand new pair of listening ears to your local dealer's chief technician so he could take your bike for a test ride and give you his professional opinion and estimate about your noise and repair cost. If you are a little short on "DRACHMA" and a Dealership is not on your list of fun places to visit then perhaps the list below will help soothe your worried mind so you can make an informed decision.
1. Bearings---SCREECH---WHINE
2. Belts---CHIRP
3. Brake Rotors---BUZZ
4. Cam Chains---CLICKIT
5. Clutches---CHATTER
6. Cylinders---PING
7. Fairing Panels---WHISTLE
8. Fenders---SCRAPE
9. Fronk Forks---Plunk
10. Fuel pumps---WHIRR
11. Gears---WHINE
12. Head Gasket---HISS
13. Hydraulic Lifters---TAP
14. Instrument Clusters---BUZZING
15. Kick Starter---GRINDS
16. Pistons---SLAP
17. Power Valves---CLINK& RATTLE
18. Radiators---GURGLE
19. Rear Chains---RATTLE
20. Rear Shocks---SQUEAK
21. Relays---CLICK&BUZZ
22. Shaft Drives---WHIRR
23. Shifting Trans---CLUNK
24. Solid Lifters---TICK
25. Speedometers---bzzz
26. Starters---CLICK
27. Rods Go---KNOCK-KNOCK---who's there, it's me "*****"
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
chirping noise from engine Kawasaki Vulcan Forum Vulcan Forums
New engine noise has me freaking out Kawasaki Vulcan 750 Forum Kawasaki...
KAWASAKI VN800 Service Manual
OEM Parts for Kawasaki
Kawasaki VN800 Owner Manual

Sep 08, 2012 | 1996 kawasaki VN 800 Vulcan Classic

1 Answer

25 year old whirlpoos fridge started chirping...we love the fridge so would like to get it fixed...it's the freezer part that is chirping


Hi,

As the weather is getting warmer for many people their freezer and/or refrigerator do not work right because of a dirty condenser coil...there are also many other things that can go wrong. If you are hearing a clicking or buzzing then check out the last two tips.

If your refrigerator is running but warm, then…

Check out this tip that I wrote about that... it is a great place to start trouble shooting your unit...and something that you can do rather then calling a repair person to do a simple thing for you...

Refrigerator Condenser Coil Cleaning Refrigerator Repair

Refrigerator Troubleshooting Refrigerator Compressor

Refrigerator Compressor Start Capacitor and Start Relay


heatman101

Aug 29, 2010 | Magic Chef CTB2125 Top Freezer...

2 Answers

Rotated tires now sensors do not read correctly


If you are talking about your low tire pressure sensors, theres a button in the glove compartment. Press it for 5 seconds to reset the sensors.

Feb 04, 2010 | 2005 Chevrolet Tahoe

1 Answer

NEED TO KNOW HOW TO RESET A PRESTIGE ELVATCE CAR ALARM


REPRIORITIZING A TRANSMITTER’S PROGRAMMING:
To reprogram a receiver channel with a different transmitter button once a code has been stored, there will be two options:
  1. Enter the transmitter program mode of the receiver channel to be reprogrammed. Using any unused button or combination of buttons, push out the stored code by pressing the unused button until a long chirp is heard, then repeat 3 additional times. After this, you can add any desired unused transmitter button. This action erases only that particular receiver channel, all other codes will remain stored.
  2. Enter the transmitter program mode. Using any transmitter button press and hold until a long chirp is heard. If a single chirp or multiple chirps, (up to 7 chirps), are heard, the unit is indicating that the transmitter has already been programmed elsewhere in the receiver. Release the transmitter button and within 5 seconds press and hold until a long chirp is heard. This action forces the unit to erase all stored codes of that transmitter.
The unit then exits the program mode the siren emits the program mode exit chirp pattern. All transmitter buttons for that transmitter must now be reprogrammed. Any other transmitter stored in the unit’s memory still remain operational. If the button is released and not pressed again within the 5 second period, no change in programming has been made to the receiver channel. The programmer can move onto a different channel or erase the transmitter codes as described in 1 above.
Regards, Martin @ http://www.lesscoelectronics.com

Sep 21, 2009 | APS20B Prestige Keyless Remote Alarm

2 Answers

Grill-mounted K-40 continues to "chirp" every 10 seconds...


I too had the same problem and called their customer service. They told me 1 chirp means a front receiver fault, 2 chirps means a rear receiver fault. They suggested I check the wiring and to switch the front receiver with the back receiver to see if the error code would "travel" with it to determine if the receiever was faulty. I did that and the problem went away. I assume I had a connection that loosened up.

Jan 13, 2008 | UN 3000SW Radar Detector

Not finding what you are looking for?
Yamaha HTR-5660 Receiver Logo

Related Topics:

460 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5455 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

The Knight
The Knight

Level 3 Expert

75462 Answers

Are you a Yamaha Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...