Question about Nikon COOLPIX S200 Digital Camera

1 Answer

Lens error i can't take picture it is always lens error

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Nikon Master
  • 102,366 Answers

This is probably THE single most common failure among digital cameras. There's a halfway chance of fixing it yourself, described here: http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html

Posted on Feb 24, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I just bought a Rokinon 10mm T3.1 Ultra Wide Angle Lens for my Sony Nex 7. I am getting an error message when attached that says Lens not recognized please attach correctly.


Samyang 10mm 2 8 Wide Angle Lens Unboxing Impressions Sample Pictures

Regarding a 3rd party lens it always have some problem. Manually pictures can be taken , if completely not supported. Check the video and find similarities. Like keep F- 22 IN LENS , ( or the highest FNumber ) .. turn on manual controls.. then shoot.. check if this helps and inform

Jun 23, 2015 | Rokinon Cameras

1 Answer

Error 00


Always when an error occurs, switch off the camera. Wait till the memory access light stops burning or stops flashing (If it did)
Then remove the battery. This will be a signal to the camera, to start all over again, when the battery is placed back and the camera is switched on again.
In your case, the camera indicated an error with the lens, or the connection with the lens.
Carful remove the lens, as described in the manual. Check is all contacts are clean and intact and of course shiny. Just a spec of dust could be the culprit. Place the lens back and look and feel if it lock correct. Then try switching on the camera again.
If you are not sure the battery is charged completely, before placing it back, charge the battery.
Then reinsert the battery and hope the error does not come back. When the error comes back it is time to contact a service centre.

Feb 05, 2014 | Samsung NX1000

1 Answer

No picture when i use camera then will appear the e32 error then shotdown


lens may be slightly experiencing a focus error . try cleaning the lens and contacts .

or set the switch to manual focus

Jan 27, 2014 | Cannon Cameras

1 Answer

My camera was broke by my kid,,it always says that sytem error always occurs on the screen,,the lens is not moving,,how can i fix,,can you help me


the len is loose and not fixed,so it can not focus and take picture.check whether it is in a bad damage,and then you can send to the repair center.remember do not touch it or pull it dowm by yourself.
www.skiliwah.cn/
http://www.digitalcamera-parts.net/
e-mail:e-8090team@hotmail.com

Sep 16, 2011 | Panasonic Lumix DMC F3 Digital Camera

1 Answer

Permanent error 06. 17-85 lens damaged when an


It most likely was a short in the repaired lens that caused the sensor to go bad over time.

I have been shooting with Canon cameras and lenses for many years and I do not always turn off power before switching lenses. It is not a big deal.

Jun 06, 2009 | Canon EOS 40D Digital Camera

1 Answer

RE: Canon solution


It is most probably that your hand was in the way when the lens is trying to come out.
Try restarting and make sure no obstructions are in the way of the lens.

Sep 08, 2008 | Canon PowerShot SD500 / IXUS 700 Digital...

1 Answer

Blurring/grainy pictures, and lens error


hi

here are some tips that may be the reason why you are having those blurry, grainy and yellowish pics.

It is important to keep your lens away from excessive heat (i.e., hot car in summertime or a heat source in a home). This will help prevent the greases, used in most lens barrels, from breaking down into an oil that can run inside your lens and cause overexposure by slowing down the diaphragm.

Use rear element lens caps on your lenses when they are not on the body. Wide angle lenses, by design, have rear elements that extend out farther then the lens barrel and are susceptible to wear, which can ruin sharpness.

Always use a filter or lens shade (hood) to protect the front element.

Never, ever, oil your lens. A minute amount of oil on the diaphragm blades will cause them to operate slowly.

hope this helps

Jan 22, 2008 | Casio Exilim EX-Z750 Digital Camera

1 Answer

Lens wont close.


Damage to the lens Mechanism is a repair shop job- or contact Kodak tech support for further advice.

May 13, 2007 | Kodak EasyShare CX7430 Digital Camera

Not finding what you are looking for?
Nikon COOLPIX S200 Digital Camera Logo

Related Topics:

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nikon Cameras Experts

kakima

Level 3 Expert

102366 Answers

Steve

Level 3 Expert

3287 Answers

Ric Donato

Level 2 Expert

225 Answers

Are you a Nikon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...