Question about Frigidaire FGF337EC Stainless Steel Gas Kitchen Range

1 Answer

Change over to propane gas

The oven flames come over top up walls what do we have to do

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 473 Answers
Re: change over to propane gas

There is an orifice on top of the safety valve that goes into the burner. Turn that orifice clockwise to adjust the flame down. Will need to turn it almost all the way down until it stops for lp.

Posted on Nov 16, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer


Are you on propane (LPG) or natural gas? If on propane, then the oven has not been converted to propane properly.

Sep 10, 2014 | Kitchen Ranges

1 Answer

I have a Frigidaire Stove, Model # FGF316ASA. It was changed from propane to natural gas. The oven works well. The burners, however, will only burn a low flame. Is there a solution for this?

When converting an appliance from propane gas to natural sometimes a technician will drill the orifice to a larger size rather than replace the orifices. Either way is fine, but sometimes the orifices don't get drilled to the correct size. The regulator must be on the propane setting if it is a convertible regulator. If your oven is working fine.... the top burner orifices probably need to be checked that they are the correct size. A simple fix.

Aug 11, 2010 | Frigidaire FGF316 Gas Kitchen Range

2 Answers

Ge propane kitchen range changed to natural gas.can't get the ove

Hi, Did you flip the cap on top of the regulator? As far as adjusting the bake/broil orfices, all you will nee to do is turn them 2 full turns counter clockwise. Start the oven and watch the flame. It should have blue tips as much as possible.
You might have to raise or lower the orfice adjustment as needed.
I hope this helps you. Please let me know if I can assist you further.


Jul 15, 2009 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

Change over to LP on whirlpool oven

All ovens come from the factory set up for natural gas. To convert to liquip propane you must change the orifices. Once you have the proper orifices, you will be able to make the adjustment you desire. You can contact your lp supplier and have them send their techie out as they do this as a free service.

Apr 07, 2009 | Kitchen Ranges

1 Answer

Whirlpool gas oven-Super Capacity 465

When you turned the oven off, if the ignitor went off and the gas kept flowing then the thermal valve is defective. Maybe that was the problem all along.

Mar 20, 2009 | Whirlpool GS460 Gas Kitchen Range

3 Answers

How do you adjust flow regulator in gas oven

how do I adjust my regulator on a gas range

Dec 02, 2008 | Kitchen Ranges

1 Answer


Msmaytag it sounds like the oven wasn't converted properly if at all to propane. If you look at the bake burner while the oven is on you should see very little yellow on the flame. If you see mostly yellow, try adjusting the air to more open. This will changed the air/fuel and may resolve the issue. If not, follow the directions for converting to propane and see if the orfice hood was either replaced or tightened down. I am not quite as familiar with the maytag is why I ask you to follow the directions. The issue with propane is that it runs at 10wc instead of the 5wc of natural gas. So double the pressure, you need more air to thin the fuel. Hope this helps.

Jun 13, 2008 | Kitchen Ranges

1 Answer

Propane gas flame too high on the burners of a drop-in Whirlpool cook top. How to adjust the burner flame.

if it set up for propane or natural gas need to make sure if for propane you need to change the orifice in the cook top, it is shipped for natural gas call the store and they can order the kit

May 06, 2008 | Kitchen Ranges

5 Answers

Changed from natural gas to propane when new oven flames up the side top burners ok

Just bought a Kenmore and did this conversion myself. You do not change the oven nozzle (jets) but have to wrench it down with a 1/2" wrench as per instructions. After I did this the falme was high as you described. I wrenched it down further and adjusted the air shuttle and it was fine. The brioler is done the same. The wrench adjustment is tight so be aware.

Apr 08, 2007 | Kenmore 79012 / 79014 / 79019 Gas Kitchen...

Not finding what you are looking for?
Frigidaire FGF337EC Stainless Steel Gas Kitchen Range Logo

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Kitchen Ranges Experts


Level 3 Expert

4342 Answers

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Barrett Palumbo
Barrett Palumbo

Level 2 Expert

1772 Answers

Are you a Frigidaire Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides