Question about Dell 922 All-In-One InkJet Printer
Go to your printer settings on the printer software interface, and there should be an option to say that you have installed new ink cartridges, otherwise just re-intall drivers
Posted on Jul 13, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jun 07, 2011 | Office Equipment & Supplies
Replacing ink cartridges
Make sure you have a new ink cartridge or cartridges before you begin. You must install new cartridges immediately
after removing the old ones or the ink remaining in the printhead nozzles may dry out.
1 Turn on your printer.
2 Open the printer.
Note: The printhead moves to the cartridge installation position.
3 Press the release tab, and then remove the used ink cartridge or cartridges.
4 Install each ink cartridge. Use two hands to install the black cartridge.
Note: Install the new ink cartridges immediately after removing the protective cap to avoid exposing the ink to air.
5 Close the printer.
The setup guide is on theCD you received with the printer.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response
Feb 23, 2011 | Lexmark Office Equipment & Supplies
Feb 17, 2011 | Lexmark X2670 All-In-One Printer
The ink cartridge carrier moves and stops at the loading
position unless the printer is busy.
Dec 17, 2010 | Dell Inkjet 720 Printer
1. Look at the indicator light on your Lexmark printer.
You'll need to replace ink cartridges when the light flashes or turns red
instead of the standard green.
2. Purchase Lexmark ink cartridges. You can buy the brand
name or purchase a generic version that is compatible with your printer. You
can shop for low cost ink cartridges from ABC Ink.
3. Remove the old cartridges from your printer. Grip the
sides of the Lexmark ink cartridges and pull it out. Dispose of the ink
cartridges in a recycle program like the one at Staples or save the cartridges
4. Install the new ink cartridges after removing the
protective tabs. Avoid touching the IC chip when installing the new Lexmark ink
cartridges. Replace the cover of the printer.
5. Allow the Lexmark printer to run a nozzle test. Print
several pages with the new ink cartridges to make sure you installed the ink
cartridges correctly. The indicator light should return to a solid green color.
do rate the solution if it helps
Nov 26, 2010 | Lexmark X1240 All-In-One InkJet Printer
Turn on your printer.
Lift the printer unit, and position the scanner support
between the tabs to hold it open.
The ink cartridge
carrier moves and stops at the loading position unless the printer is busy.
Press down on the ink cartridge lever to raise the ink cartridge
Remove the old ink
Dispose of the old cartridge properly.
If you are installing a new ink cartridge, remove the
sticker and transparent tape from the back and bottom of the ink cartridge.
Insert the new ink cartridge.
Snap the lid closed.
Lift the printer unit, and hold the scanner support up while
lowering the printer unit until it is completely closed.
DON'T FORGET TO RATE THE SOLUTION, THUMBS UP!
Nov 22, 2010 | Dell 810 All-In-One InkJet Printer
Apr 24, 2010 | Lexmark C533DN InkJet Printer
Jan 04, 2010 | Epson Stylus CX4800 All-In-One InkJet...
Apr 04, 2008 | Canon PIXMA iP1600 Printer
Mar 09, 2008 | Kodak EASYSHARE 5100 All-In-One Printer
113 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: