Question about Tricity Bendix AW1000W Front Load Washer

1 Answer

Bendix 800 autowasher de luxe, drum spin snagged then cleared.

Found two pieces of broken off vessel on the floor under the washing machine? - blue glazed ceramic inner surface with pitch coloured outer surface. What is this from and is it serious, presumeably it wont run well in this condition.

The machine appears to be running OK on empty spin. Wont chance a load spin just yet.

Should I get a service engineer in to check it out?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 25 Answers

Should b nothing off this description on ure machine unless the pump coil has over heated iff so just replace coil and check for blockages

Posted on Jul 13, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My lg top loader washing machine model T1308TEFTO is indicating error PE code and just wont start the washing program what can be the problem please help


Check the pressure switch -the system that determines correct water level in the drum. If its giving an incorrect indication to the program timer machine will either overfill, refuse to fill or refuse to spin. Its an air operated diaphragm switch triggered by rising air pressure induced by the entry of water into an airtight vessel attached to the base of the drum. It tells the program timer that the water has reached the correct level, allowing it to proceed to the water heating stage in the cycle. Power off, drag machine out onto the floor, remove back cover and top cover. The pressure switch is a round item about 3 inches across with several wires and a thin rubber pipe attached. It generally sits just under the top cover. Disconnect the thin rubber pipe from the switch and blow down through it to clear any blockage. Switch itself may be faulty but its more likely the pressure pipe or the vessel attached to the other end of the pipe is blocked. Some machines have the pressure vessel integrated as part of the filter unit, with a pressure chamber moulded into the top of the filter body. Remove the pressure vessel, put a small nut or screw in it, fill it with water and shake vigorously till any crud or residue is removed. Refit all parts, check that joints and connections are water tight.
Also check the filter itself - generally located behind a panel at the foot of the machine.Some are obvious like little square hatches and some are hidden behind the trim panel at the foot of the machine. Once panel is removed the filter should be visible. Its generally a circular plastic fitting which unscrews in an anticlockwise direction. Some hotpoint, indesit and ariston filters are located in the big black sump hose (the one that leaves the bottom of the outer drum and connects to the pump). Power off, drag machine out onto the floor, remove back cover or tip machine up at an angle. Locate sump hose, remove the tensioner clip by squeezing the tabs together with a large pair of pliers or vise grips, remove the hose, take out filter and clean. Be prepared for spillage of water. May help if the machine is tilted backwards at an angle.

Feb 27, 2013 | Washing Machines

2 Answers

Machine will fill and turn slowly but will not


Check motor capacitor first.Try moving the drum and see there is no extra friction. If your washer has got braking mechanism check the brakes also. ( I have no idea about this model regarding break)

Mar 30, 2010 | Tricity Bendix AW1400W Front Load Washer

1 Answer

Machine will not spin out water,does this machine have a belt driven drum or is it direct drive? found under unit what was thought to be rubber material on floor


depending on the model you have it can be either or.
if you can lean the machine back and take a llok under neath you might be able to see the motor and the drain pump might be attached to the front of the motor. look just behind the motor and you should see a black rubber piece with two white plastic pieces this is a drive coupler and if it is broken then you need to replace it

Jan 31, 2010 | Washing Machines

1 Answer

Tricity bendix BIW103W spins badly, clothes still too wet.


Hi, Your problem is very common and very easy to fix. You will first need to strip the machine down and remove the motor. Once you have done this then take off the motor carbon brushes, These are the little things in cases on the side of the motor casing. These should be at least 1" long! you will find that this is not the case and they will need replacing to resolve your problem. The parts should not cost anymore than around £20 for the pair.
Good luck any problems get beck to me............................

Mar 18, 2009 | Tricity Bendix WDR1040W Front Load Washer...

1 Answer

Kenmore washing machine 110.92580100


replace the direct drive coupling it is located between the transmission and the motor part number is 285753a if you need further help let me know

Apr 26, 2008 | Washing Machines

4 Answers

Tricity bendix aw1400w will not spin


We had a similar problem, where it washed okay but didn't spin and just 'beeped' with end light flashing. When the drum was empty it was not moving round very freely.
Try unplugging the machine from the electricity. Then take top off machine off so you can see the casing outside the drum. There's a small rubber tube on top. If you disconnect that you can look through into the drum. Try turning the drum round slowly while looking through the hole. We found a sock wedged in which we managed to pull out through the hole (not easy and don't expect the sock to come out in one piece).
It worked - and we've had to repeat the procedure a couple of times now. Think I must be putting too much in the machine in 1 go, although there's always space at the top.

Jan 22, 2008 | Tricity Bendix AW1400W Front Load Washer

1 Answer

Bendix 800 autowasher


put it on its back on yhe top side of the motor you will see the brushes two screws hold each one on.

Jan 03, 2008 | Tricity Bendix AW1000W Front Load Washer

1 Answer

Tricity Bendix AW1400W Won't spin or agitate.


this could either b the motor brushes or the timer check the brushes first they r mounted on either side of the motor unplug the machine b4 u start good luck

Aug 26, 2007 | Tricity Bendix AW1400W Front Load Washer

Not finding what you are looking for?
Tricity Bendix AW1000W Front Load Washer Logo

206 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tricity Bendix Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1466 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Charles T Nevin
Charles T Nevin

Level 3 Expert

4066 Answers

Are you a Tricity Bendix Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...