Question about Canon Pixma iP6000D InkJet Photo Printer

1 Answer

Color printing Everone's faces are too red. I reset back to factory default no help. Please e-mail your answer to

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 4,402 Answers
Re: color printing

Solution: Manually adjust color from the driver (Windows)

Manual Color Adjustment Follow the steps below to make fine adjustments to the color hue for the printed output. These settings will only make minor color adjustments. If more drastic color adjustment is necessary, use an image editing application.

  1. On the Windows desktop, click 'Start', point to 'Settings', then click 'Printers' (Windows XP: On the Start menu, click 'Printers and Faxes', Windows Vista Click / Select Start from the bottom left of the Windows screen, 'Control Panel', 'Hardware and Sound', and then click on 'Printers'.).

    Note: If you are in 'Classic' view, Click 'Printers' directly from the 'Control Panel'.

  2. Windows 2000/XP/Vista: Right-click the printer icon, then click 'Printing Preferences'. Windows 98/Me: Right-click the printer icon, then click 'Properties'.

  3. On the Main tab, select 'Manual' for 'Color Adjustment.'


  4. On the Manual Color Adjustment screen, adjust each color individually to achieve the desired effect.

    Note: This screen may vary depending on model.


Posted on Jan 15, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

2 Answers

Hp deskjet 1050 need to reset to factory default please, help

  • 1. Turn off the printericon1.png and remove the power cord from the back of the unit. Leave the printer powered off for at least 30 seconds.
  • 2 Press the powericon1.png button on the printer and hold the "Go" button as the printer is powering on. Watch for the "Attention" LED to turn on and stay steady.
  • 3 Release the "Go" button and allow the printer to continue powering on. The printer should now be reset

  • Read more:

    May 15, 2014 | HP LaserJet 1320 Printer

    2 Answers

    CM 1015mfp Colors are not aligned. when printing the characters looks like 3D.

    If nothing else works, you may have to manually calibrate the dials inside the mirror box. This video link will show you how.
    This may be necessary if the printer got bumped really hard.

    Aug 17, 2011 | HP Color LaserJet CM1015 Printer

    1 Answer

    Reset hp 1515n

    ? Restore defaults-used to reset all customer-accessible menu settings back to the factory default
    settings (except language) via the control panel or software
    NOTE: This service menu item does not reset factory-settable settings, including formatter
    number, page counts, factory paper settings, language, and so on.
    NOTE: Before restoring defaults, print a menu structure report and a configuration page. Use the
    information on these pages to reset customer-specific settings.
    CAUTION: All HP Jetdirect settings are also reset. Be sure to print a configuration page before
    restoring defaults. Make note of the IP address that is listed on the Jetdirect configuration page. You might need to restore the IP address after performing a cold reset.
    Restore the factory-set defaults on the (HP Color LaserJet CP1510 Series Printer

    1. Press OK to open the menus.
    2. Use the Left arrow or the Right arrow button to select Service, and then press OK (Select).
    3. Use the Left arrow or the Right arrow button to select Restore defaults, and then press OK.
    The product automatically restarts.

    Jul 13, 2011 | HP LaserJet CP1515n Printer

    1 Answer

    Ink system failed. error message Oxc18A0001. Turn power off then on again Have done this but message still reappears

    Please perform the below resets


    Press & hold the power button > unplug the power cable from the back of the printer while holding the button for 30 seconds > plug the cable back then release the button.

    2.A semi-full reset will do the following:
    The user settings to the factory defaults, Language and country settings on some models.

    Reset the All-in-One to the factory default settings by using these instructions:

    1) Press Red Eye Removal & Print Photos button simultaneously

    2)Enter Special Key Combo is displayed on the screen.
    Press and release in sequence "Red Eye Removal", "Print Photos", "Red Eye Removal"
    Display should say "Support" and display the FW rev XXXXX.

    3) Press Right Arrow button untill "Reset Menu" is displayed. Press OK.

    4) Press Right arrow untill "Semifull Reset" is displayed.

    5) Press OK.

    Oct 04, 2010 | HP Photosmart C6280 Printer

    1 Answer

    I changed my ink, but the printer will not print in color. It only prints in B&W. It is a f4180. i have windows home vista. i need to print a school project by tommorrow - help!

    Try unplugging the printer for five minutes and than plug it in back in and turn it back on. By doing this we are resetting the printer to the Factory Defaults, (settings that were set when it left the factory) Hope fully this will help you.

    Jun 03, 2010 | HP Deskjet F4100 All-In-One InkJet Printer

    1 Answer

    Reset Factory Defaults

    I fixed the problem with no help from your a matter of fact, I mailed the guy back that "helped" me online and heard nothing from him either.

    Good thing Im resourceful.......$15 WASTED!

    Oct 14, 2008 | Canon ImageRunner 2800 Copier

    2 Answers

    HP PSC 750xi - Incorrect color printer cartridge installed error

    I had this same problem and by a luck I fixed it. Not sure if the method to the madness had anything to do with it, but I'll put it down in the order that I did everything. 1. reset to factory defaults 2. pulled all cartridges out. it prompted me to put color in first, then black. message was still blinking so i took out color and put it back in again. 3. i did the partial reset by holding down cancel and left arrow while i unplugged/replugged the printer. 4. no the printer started displaying "remove and check color cartridge" (or something to that degree) 5. i took out color cartridge, cleaned the contacts with water on towel, and replaced cartridge. 6. same message still being displayed, but it allowed me to print a maintenance report. so i then cleaned cartridges and aligned cartridges through standard menu. 7. msg still being displayed, so i turned off/on printer again. this time it came back up with no message at all. 8. printer now works
    hope this helps and works for ya'll too!

    Sep 29, 2008 | HP PSC 750 All-In-One InkJet Printer

    1 Answer

    Error message

    Hi, As you are facing the paper jam issue please follow the instructions in the HP weblink : Here is the weblink that address your issue: ========== ========= Just click on the link and follow the instructions to fix this You can also try to reset the printer to factory default if this dose'nt work Wish you success Regards, Barret.

    Sep 27, 2007 | HP PSC 1610 All-In-One InkJet Printer

    Not finding what you are looking for?
    Canon Pixma iP6000D InkJet Photo Printer Logo

    148 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Canon Printers & Copiers Experts


    Level 3 Expert

    94039 Answers

    old marine
    old marine

    Level 3 Expert

    1301 Answers

    Donald DCruz
    Donald DCruz

    Level 3 Expert

    17129 Answers

    Are you a Canon Printer and Copier Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides