Question about Lexmark X2350 All-In-One InkJet Printer
Where is the ink cartridge on the lexmark x 2350?/
Open the cover while power is on. the cartridges will slide to the middle where you can reach them
Posted on Jul 13, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Here's the User's Guide for your reference. Just click on this link: http://www.lexmark.com/publications/pdfs/2007/2300/2300-en.pdf . Scroll to Maintaining the All-in-One, Page 52, for instructions on how to change/replace the cartridges on the Lexmark X2350. In some cases, even when the printer is on and the cover open, the carrier doesn't position to the center. Unplug the printer from the power source. With the cover open, hold the solid white tape in the middle inside the printer. Other end of it is connected to the carrier. Slowly drag the carrier to the center loading position. Load the cartridges. Close the covers. Plug printer back to the power source. Hope this helps.
Posted on May 07, 2010
Tips for a great answer:
For the most optimal output experience with your AIO, Lexmark
recommends that customers update their firmware. The firmware helps ensure that
customers receive the highest yields of ink available from the cartridges,
which offers the greatest value and means fewer necessary cartridge
If you choose to upgrade firmware, note that unauthorized use of
third-party 'cloned' cartridges will no longer be possible.
When purchasing ink cartridges, Lexmark customers have two
Regular ink cartridges without license terms that
they may a) return to Lexmark free of charge (for recycling by Lexmark), b)
refill, recycle or remanufacture themselves, or c) provide to third parties for
refilling, recycling, or remanufacturing. Any Regular ink cartridge
can be refilled by a customer or a third party and will continue to work in
their Lexmark printer.
Return Program ink cartridges that provide customers with an up-front discount in exchange for their agreement to use the ink cartridge once and return it only to Lexmark for remanufacturing and recycling.
Jul 11, 2011 | Lexmark Interpret S405 Wireless All-in-One...
Turn the Lexmark printer on by pressing the power button. Usually, the power button is located on top of the Lexmark printer. If the Lexmark printer does not power on immediately, then hold the button down for a few seconds before releasing it. Once the Lexmark printer has powered on, the installed cartridges will begin to move back and forth for a few minutes.
Raise the Lexmark printer cover up towards you. Doing this will give you instant access to the inside components of the Lexmark printer. Lift the cartridge release lever and remove any installed ink cartridges. Be careful when doing this because the ink may leak out. It's best to have a disposable bag or paper towel near you when performing these steps.
Remove the plastic from the brand new cartridges by carefully cutting them open with scissors or tearing along the perforated edges. Once you have removed the plastic, there's a yellow tag located near the bottom of the ink cartridge. Take this tag off only when you're ready to insert the ink cartridges into the slots.
Tear the yellow tag from the ink cartridges and place them into their corresponding slots. Each one will be easily identified by its color. The cartridge release lever will have the same color as the ink cartridge. If you mistakenly place the cartridges in the wrong slot, then you'll risk having your Lexmark printer stop working properly.
Press the ink cartridges into the slots and listen for a clicking noise after the insertion. Although you will need to firmly place the ink cartridges into the available slots, it still needs to be done gently. Close the Lexmark printer cover when you've completed the previous steps. Wait a few minutes for the Lexmark printer to recognize that you have inserted brand new ink cartridges. After a few seconds, it will go through some diagnostic steps to make sure the ink cartridges were correctly inserted.
Print a test page on your Lexmark printer. This will help you to determine if the ink cartridges are properly working. You can view the newly printed images and text after the Lexmark printer has finished printing. Get rid of your used ink cartridges by throwing them away or sending them to an online store that accepts empty ink cartridges.
Jan 17, 2011 | Lexmark X2330 Printer
1. Look at the indicator light on your Lexmark printer.
You'll need to replace ink cartridges when the light flashes or turns red
instead of the standard green.
2. Purchase Lexmark ink cartridges. You can buy the brand
name or purchase a generic version that is compatible with your printer. You
can shop for low cost ink cartridges from ABC Ink.
3. Remove the old cartridges from your printer. Grip the
sides of the Lexmark ink cartridges and pull it out. Dispose of the ink
cartridges in a recycle program like the one at Staples or save the cartridges
4. Install the new ink cartridges after removing the
protective tabs. Avoid touching the IC chip when installing the new Lexmark ink
cartridges. Replace the cover of the printer.
5. Allow the Lexmark printer to run a nozzle test. Print
several pages with the new ink cartridges to make sure you installed the ink
cartridges correctly. The indicator light should return to a solid green color.
do rate the solution if it helps
Nov 26, 2010 | Lexmark X1240 All-In-One InkJet Printer
Apr 24, 2010 | Lexmark C533DN InkJet Printer
Apr 20, 2009 | Office Equipment & Supplies
Apr 13, 2009 | Office Equipment & Supplies
Mar 20, 2009 | Lexmark Wireless X4850 All-In-One Inkjet...
Nov 27, 2008 | Lexmark Office Equipment & Supplies
Sep 15, 2008 | Computers & Internet
135 people viewed this question
Usually answered in minutes!