Question about Casio Technowear CMD30B1T Wrist Watch

1 Answer

Replacing the battery..

I want to replace the battery on my watch. how do it do it?i have the casio CMD30B module number 1173. i can't figure out how to take the old battery out.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 19 Answers

Ok Mdane

This is going to be tricky not have seen that watch before at all. BUT like most Casio's there screwed casebacks.
All you have to do is undo the 4 screws (usually) and take of the back gently remove the battery? Sometimes it has 2 small screws if you gently unwind one a few turns and the other take compleltely out and set aside. Remove the battery and take it your local battery shop (sorry from australia so I don't know where you get your batteries walmart perhaps?) and replace it in the reverse order. Sorry if its so vague I haven't seen that watch before
Hope it helps

Posted on Jul 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I cant set the date, because I got the battery replaced and I the date is two days late


Use the manual to set the correct time zone, time and date. Manual is available on the Casio worldwide website>support>manual>watches.
Have the module number at hand: you will enter it to find the manual. The module number is a 3 digit or 4 digit number on the back of the watch.

Nov 09, 2013 | Casio G-Shock G 300 G 301B 1ADR Watch

2 Answers

Com0 obtenfo el manual de codigos de tv para el casio cmd30


como obtengo el manual para programar el reloj para controlar la tv

May 04, 2011 | Casio CMD30B Watch

2 Answers

Have misplaced instructions & have just replaced battery but unable to re-set time etc?


Hi steveandlois,

Your watch module number should be 3747. Modules 2735 and 4772 are operationally all the same. Click the following link to download a PDF for these "CombiWave" models:
http://ftp.casio.co.jp/pub/world_manual/wat/en/qw3747.pdf

This should get you getting again. Thanks.

Regards, Bill

Sep 14, 2010 | Casio Waveceptor WVQ-201HA-7BVCF Watch

1 Answer

How to restart my casio module no 2271 watch


mcdevito75 here, I'm figureing you"ve changed the battery, Pressing the MODE button should re-start your watch. If you didn"t change the battery and your watch just stopped, try pressing the MODE or any button to re-start the watch. If nothing, change the battery and repeat the above instructions.

Jun 23, 2010 | Casio PRG-40T-7 Pathfinder

1 Answer

My watch is working but the buttons are not working


carbon is deposited between the contacts of button open watch and clean with ip acid

May 24, 2010 | Casio CMD30B Watch

3 Answers

Casio module 2273 battery change


did u ever figure out how to get the retaining clip?

Mar 13, 2010 | Casio PRG-40T-7 Pathfinder

2 Answers

HANDBOOK FOR CASIO WAVECEPTOR TOUGH SOLAR 4719 WV0-620


Go to the Casio web site "casio.com", select "support" and the "manuals", then "watches", accept their terms and conditions,

Insert the module number and download instructions.

Jan 18, 2010 | Watches

1 Answer

Im tryna find out what dynex big band tv code for a casio watch remote


http://world.casio.com/wat/download/en/manual/

Use the four numbers on the back of your watch and you will have a PDF version of your instruction manual.

Hope this tip helps.

R/
David

Jan 03, 2010 | Casio CMD30B Watch

1 Answer

Cannot reset time


Hi to anyone with a wave ceptor, when you replace a battery you need to re calibrate the hands to 12 o'clock (also those with a 24 hour hand will need to be set to 24) this is called the home position, the same goes to stopwatch hands.
The hand setting settings vary wildly from watch to watch you will need to consult the manual or if you have lost it download thePDF file from casios support page, www.casio.co.uk , you will need adobe reader or a similar program that reads PDF files also you will need the module number, this can be found as a 4 figure number on the back of the watch, these instructions are easy enough to understand, i managed to set mine no problem.
Good luck!!!!

Apr 18, 2009 | Watches

1 Answer

Had to replace the battery


As I don't know module number of your watch I can't find out the right manual.
You can do it yourself by pasting this link into your browser and following instructions:

http://world.casio.com/wat/download/en/manual/

Jan 09, 2009 | Casio G-Shock GW300CA-1V Wrist Watch

Not finding what you are looking for?
Casio Technowear CMD30B1T Wrist Watch Logo

297 people viewed this question

Ask a Question

Usually answered in minutes!

Top Casio Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18387 Answers

Jimmy Accardi

Level 2 Expert

101 Answers

k24674

Level 3 Expert

7993 Answers

Are you a Casio Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...