Question about Dell 3010cn Laser Printer
This error means that your Drum Cartridge belt isn't aligned properly or the sensor for it has become dirty.
Open the top of the printer and look inside. There should be a blue tab on the right side to unlock the drum assembly. Unlock it and lift the assembly straight up to remove it from the printer.
Now, look at the thing you just pulled out -- the drum assembly -- and you should see a black rubber belt. If you turn the wheels that operate it, you'll see that the rubber belt is not centered, so the sensor can't see the little silver plate.
Pull gently on the rubber belt to re-center it, then reinsert the drum cartridge and close up the printer.
Posted on Jul 21, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Jan 03, 2011 | Dell 3010cn Laser Printer
Dec 13, 2010 | Dell 3100cn Laser Printer
Aug 25, 2010 | Dell 3010cn Laser Printer
Jul 14, 2010 | Dell 3010cn Laser Printer
May 15, 2008 | Dell 3010cn Laser Printer
789 people viewed this question
Usually answered in minutes!