Question about Konica Minolta bizhub C250 All-In-One Laser Printer

3 Answers

Network the network option is gone from My admin. settings

Posted by on

  • Mr-Jas Oct 03, 2008

    When i setup for DHCP and Auto Ip Printer is not working on network.

    How to disable DHCP and Auto IP setting.?

    I cannot see the networking tab options if the networking option will be back then i can add a manual ip address again in my printer?

×

Ad

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 146 Answers

Yes. Do not change the controller type. The network button will show up when the network interface initializes and becomes ready. If DHCP is enabled and you are on a network with static IPs set up the controller may not be able to reslove an IP from the DHCP host. These units perform better with a static IP.

Posted on Jan 03, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 2 Answers

Enter in service mode, system2, image controller setting, set to:

controller 0 "zero"

B.R.

Jantonio

Posted on Jan 03, 2008

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 214 Answers

Restart, wait a 1-3 minute, when the printer shows ready for copyng then look again.

Posted on Dec 31, 2007

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

SOURCE: lost settings

If the IP option was set to DHCP before it was turn off, wait at least 5 min for the network settings to show up.

Posted on Mar 09, 2008

  • 24 Answers

SOURCE: Our Biz hub C 250 has lost the number 5 network

It hasn't lost the button but it does not appear during warm up and for several minutes afterwards, let it warm up and give it five minutes and then try admin mode it should be there then.

Posted on Jul 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

NETWORK SETTINGS


In ADMINISTRATOR MODE ,if Network settings are not showing then wait there for few seconds it will appear.Some times It take few seconds to load.If the problem is still there then disconnect the machine from the network.Remove the network cable from the machine and again check for the network settings.They will show up now.

Mar 22, 2014 | Konica Minolta bizhub C250 All-In-One...

1 Answer

NETWORK SWETTINGS


If Matt9711's solution does not work you will need to go in admin mode and turn off the network then go in service mode and reinitialize the network card then power off then on and then back in to admin and turn the network back on.

Mar 22, 2014 | Konica Minolta bizhub C250 All-In-One...

1 Answer

Set dhcp on bizhib 250


1-Press "Utility/Counter" button from the control panel.
2-Press "Administrator settings"
3-Enter "Admin Password"=12345678
4-Press "END" button on top right corner of the screen.
5-There are two settings now, Admin1 and Admin 2.
6-Press Admin 2. the network settings
7-Now press "IP settings" in this option there will be two settings one is obtain IP auto and other is put IP manual.
in network settings you will see all the other options such as ping confirmation, DNS HOST, DNS SERVER ADDRESS, DHCP ON/OFF, SMTP etc.

Jan 29, 2013 | Konica Minolta bizhub Office Equipment &...

1 Answer

Need to unlock to use different network


If you're referring to "resetting" your wireless router, you only need to press a hidden button at the back of the router. Find a small hole at the back and press it using a thin object like toothpick or a wire. Press it for at least 15 seconds. After doing that, connect one PC to the router using LAN wire and log-in to the router's default address. Since you did not mention what modem you have, here are the options;
192.168.0.1 192.168.1.1 Use default Username and Passwords to set up new Wireless Protocol. Here are possible options;
UN: admin PW: admin
UN: admin PW:
UN: admin PW: password
UN: admin PW: 1234
From here, if you can log-in to Router's IP, look for the Wireless configuration options. It will allow you to set Network Keys and other security options.

Jun 04, 2011 | Computers & Internet

1 Answer

I cant see my profile picture & my friends also.


ifyou are working in local network then might be the administrator has blocked the images, so try to contact the admin.
if not in local network then try to set your brower in default settings or select options and select load images option.

Dec 11, 2010 | Facebook Social Network

1 Answer

DHCP DISCOVERY - USING OPTION 128 ERROR ON PHONE


The network switch isn't set up properly.Contact your vendor or network admin for setting this up properly.

May 26, 2010 | Mitel 5215 IP Phone

2 Answers

Our Biz hub C 250 has lost the number 5 network setting option button when in admin panel settings. All other functions seem normal. This issue prevents setting or discovering the machine networking...


It hasn't lost the button but it does not appear during warm up and for several minutes afterwards, let it warm up and give it five minutes and then try admin mode it should be there then.

Feb 19, 2009 | Konica Minolta bizhub C250 All-In-One...

1 Answer

Lost settings


If the IP option was set to DHCP before it was turn off, wait at least 5 min for the network settings to show up.

Feb 08, 2008 | Konica Minolta bizhub C250 All-In-One...

Not finding what you are looking for?
Konica Minolta bizhub C250 All-In-One Laser Printer Logo

409 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6674 Answers

Adorjani Laszlo

Level 3 Expert

1297 Answers

Ben
Ben

Level 2 Expert

108 Answers

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...