I see 2 interlock switches on wiring diagram only found 1 on tractor
SOURCE: mower quits when engaging mower deck of husqvarna yth 2348
Try putting a jumper wire on the wire going from the engine to the seat. Take that plug and put a wire from one side to the other. Be careful not to cut your feet off when engaging deck.
SOURCE: When I engage the mower blades, the tractor tries to stall
Besides the reverse switch, the seat switch will also cause this.
SOURCE: Sears 42" riding lawn mower. All of the interlock
I have seen situations where the lever which is supposed to make the safety switch was not lined up properly to make the switch totally. I've had to actually bend the metal to make it work. I would try manually making the switches involved one at a time.
SOURCE: i need a wireing diagram
Your mower is manufacturered by John Deere if you did not know so the schematic will be the same. Thet are sold only through John Deere franchises. None are available on the web as far as I know. I have been looking for years of many models to complete my collection.
Also here is an owners manual in case you need it too
http://www.deere.com/en_US/homeowners/media/pdfs/products_non_current/scotts/lawn_tractors.pdf
84 views
Usually answered in minutes!
×