Question about Averatec 3200 Notebook

2 Answers

Averatec 3200 DCRW/DVD not working

Averatec 3200 series CDRW/DVD does not recognize any media. Can I replace this hardware with ANY or does it have to be the same?

Posted by on

2 Answers

Re: Averatec 3200 DCRW/DVD not working


Posted on Nov 16, 2007

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has written 3 tips or uploaded 2 video tips.


    An expert whose answer got voted for 20 times.

  • Expert
  • 116 Answers
Re: Averatec 3200 DCRW/DVD not working

You can put any CD/DVD/HD-DVD/Blu-Ray drive in it as long as you have the rigth connection cable and XP or above. i.e. PATA, SATA, SCSI...

Posted on Nov 16, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

4 Answers

Averatec 3200, cant find DVD Rom driver in "My Computer" or "Device Manager" When I put in a CD I can hear the disk spinning but it never loads. I deleated the upper and lower filters and restarted the...


Make sure the BIOS is 'seeing' the drive. Reboot your pc, press F2 as soon as it starts to boot (Or watch your screen and the POST will display which function key to press to enter setup.) If the BIOS is NOT seeing the drive, you may need to a) replace the drivers for the dvd or b) replace the dvd rom itself. (I recommend the drivers first.) Please repost your results and we will continue to monitor your progress.

Good Luck

Sep 04, 2009 | Averatec 3200 Notebook

1 Answer

USB ports stopped working

go to the Averatec support driver page and download new drivers for the USB. Sometimes these are listed as "chipset" drivers, which is a set drivers bundled into one.
below is a link to where you can download files

Aug 30, 2009 | Averatec 3200 Notebook

1 Answer

My averatec series 3200 notebook cant detect my usb device

The flash disk could be faulty, especially when it draws too much power, and this will cause the USB ports to shut down and the other USB devices won't work until the faulty device is removed.

Mar 11, 2009 | Averatec 3200 Notebook

1 Answer

Averatec driver problems

In order to up date your drivers, go to the avertech web site and go to driver downloads you will need to put in the model # of your computer in order to get the proper driver downloads. hope this was helpful.

Jan 25, 2009 | Averatec 3200 Notebook

1 Answer

Averatec driver

There support site can be found here

Jan 24, 2009 | Averatec 3200 Notebook

1 Answer

Please help, my Averatec 3200 does not play dvds.

Try to use a dvd player software like winows media player (included in windows), just put the dvd in and it will ask about what to do, just select to play with media player and you can enjoy. (double click to put it fullscreen)
If nothing happens after inserting the disc than push start menu button go to programs and windows media player should be there somewhere, or in start menu push run and type wmplayer and than push enter. Than open the dvd with it.

Nov 23, 2008 | Averatec 3200 Notebook

1 Answer


what have you tried?
does it spin when you put a disk in?
have you tried using a cleaning kit?
how old is your dvd cd drive, how much usuage have you given to it? you may need to consider replacing the item.
have you installed any virtual drives? I remember dealing with an issue semilar to one described due to a virtual drive that I had installed.
if possible check the datacable.
firmware is something that you may want to update, read carefully for instructions in the manufacturer website... no garanteed that will fix any hardware issue like a faultry track that may need to be lubed, a broken motor or a faulty/dirty lense.

Nov 07, 2008 | Averatec 3200 Notebook

1 Answer

Averatec Laptop computer-

This could be a simple glitch, but most likely the screen is going out and will need replaced. Start by adjusting the screen resolution in the display properties. Adjust it to a lower setting, apply, then adjust it back to where it was, and apply. If this doesn't work, then try uninstalling the video drivers from the device manager and rebooting. The machine will automatically find the video and reinstall the drivers. By doing these two, you have just ruled out a software glitch and narrowed it down to hardware, so, if the problem persists, then it's the screen and will need replacing.

Jul 25, 2008 | Averatec 3200 Notebook

1 Answer

Buying a hard drive for the Averatec 3200 Series

I have a tip. Don't forget to set up the drive as master or slave (depending on what you want the drive for). I personally have forgotten to double check this on numerous occasions (its always the simplest thing you overlook with everything) only relizing when I have the case screwed back on and am trying to boot the drive up.

Aug 11, 2007 | Averatec 3200 Notebook

Not finding what you are looking for?
Averatec 3200 Notebook Logo

Related Topics:

122 people viewed this question

Ask a Question

Usually answered in minutes!

Top Averatec PC Laptops Experts

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Mike McWhinney

Level 3 Expert

537 Answers

Are you an Averatec PC Laptop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides