How old is this washer

disconnect the power for 10 minutes and run a rinse and spin cycle.

For estimates of cost, contact someone locally. One great way is to ask on a local Facebook group for recommendations. What I get charged in Toronto Canada will be different to New York City of Manila, Phillipines, or Auckland NZ..

That’s a long drain code. Check drain
Pump for obstructions

You will need to replace the water inlet valve. Here is the part you need.

That laundry combo unit was manufactured in October of 1994

Any possibility the unit froze this past winter? They do have to be winterized.

10-12 years old.



Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Your Stainless Steel drum is supported inside of the washer tub by a spider assembly. The assemply, which is made of cast aluminum, has corroded (steel and aluminum and detegent don't mix) and the spider assembly has broken. The drum has likely wobbled enough to wear a hole through the tub. You need to replace the drum and spider assembly, and tub.

This page will show how to take it apart http://www.appliance-repair-it.com/GE-front-loader-washer.html

If you're asking what year the washer was manufactured, it was August of 1995. I hope this answers your question. If you still need assistance, please let me know.