Question about Singer Sewing Machines
I believe that is top loading Apollo bobbin case if so, facing the front of the machine underneath bobbin cover/door there should be a bracket on the left (holds bobbin case) move it back, set case in with the cut out pointing to the back of the machine, you may have to wiggle it a bit until you feel it is seated the move the bracket back over the bobbin case
Posted on Nov 24, 2015
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Bobbin Case
I'm having a similar problem today. I took out the bobbin case and when I went to put it back in, the whole system locks up. I've tired cleaning, changing needle taking the metal plate and piece that holds bobbin case out and put it all back in after cleaning. Nothing. My symptom is I can't get a complete stitch, the needle goes down, the whole deal acts like it will work and as soon as the arm of the bobbin case gets to 8 o' clock on the gears, It jams and won't hardly move. I cannot pull the bobbin case out easily after this. Perhaps there is someone out there that can help us!
Posted on Jun 23, 2008
Take the bobbin case out. Then when you go to put it in, realize there are 2 ways to get it. You have found one way. The other way is first look in the the slot with a flashlight before you insert it. There is a flat piece of metal the bracket needs to be slid under as it is inserted. This acts like a spring making it tight
Posted on Mar 18, 2009
The silver plate should be on top.
Posted on Jan 01, 2010
Testimonial: "Thank you very much for your advice, I had initially placed it on top and it seemed to work but I wasn't 100% sure, now I am, thank you once again."
If you go here and search for 9005, you can find a free downloadable instruction manual.
Posted on Jul 22, 2010
Make sure the bobbin case sets sort of on top and not under the ridge of the metal ring. There is a small latch on the upper left of the bobbin case. It is metal. rotate the latch to cover the bobbin case and this should stabilize the case without making it immobile
Posted on Aug 01, 2010
Tips for a great answer:
Apr 16, 2015 | Singer Sewing Machines
Nov 14, 2014 | Sewing Machines
Jun 09, 2012 | White Sewing Sewing Machines
May 29, 2012 | Sewing Machines
Sep 25, 2010 | Singer HD-110 Mechanical Sewing Machine
Feb 16, 2010 | Singer Sewing Machines
Jan 27, 2010 | Singer 7442 Mechanical Sewing Machine
Jul 09, 2009 | Singer Sewing Machines
May 03, 2008 | Singer 5050 Mechanical Sewing Machine
100 people viewed this question
Usually answered in minutes!