Question about Canon Office Equipment & Supplies

1 Answer

When printing a list of names, each of which is followed by an E Maill address, the printer prints only the names. I have reinstalled the software but still have the problem.

Posted by on

  • rneill Jul 13, 2009

    The suggested procedure failed.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Canon Master
  • 13,433 Answers

Try selecting the part of the document you wish to print with your mouse.

then select File -> print -> click on Selection, then click print.

Posted on Jul 13, 2009

  • Ekse Jul 13, 2009

    Try writeing the email address next to the name yourself, see if that prints out the names, and the one email you wrote.

    If it does print, then the problem is not with your printer, its just how the document was made and the email addresses are not printable at present, its possibly a setting somewhere in the program.



×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I change the ip address of the Dell 1720 dn printer to work with my network?


Ok the following instructions will help you reset the ip address of your printer however you must use the origina driver cd to do this. Follow the instructions below if you have no print server involved with this network. If you do use a print server let me know ok?

Print and Check the Network Setup Page
  1. When the Ready/Data light is on solid, press and release Continue to print a menu settings page and a network setup page.

  2. Under the Standard Network Card heading on the network setup page, make sure Status is Connected.

If Status is Not Connected:
    • Make sure the Ethernet cable is firmly plugged into the back of the printer.

    • Plug the Ethernet cable into another wall outlet.

  1. Under the "TCP/IP" heading on the network setup page, make sure the IP address, netmask, and gateway are what you expected.

  2. Ping the printer and verify that it responds. For example, at a command prompt on a network computer, type ping followed by the new printer IP address (for example, 192.168.0.11):

ping xxx.xxx.xxx.xxx
If the printer is active on the network, you will receive a reply.
  1. If your printer doesn't respond, or if the IP address is not what you expected:

    1. Insert the Drivers and Utilities CD into your computer.

    1. The Drivers and Utilities CD should launch the installation software automatically.

If the CD does not automatically launch, click Start® Run, type D:setup.exe (where D is the drive letter of your CD), and then click OK.
    1. When the Drivers and Utilities CD screen appears, click Set IP Address Utility.

    2. Select your printer from the "Configure Print Servers" list, and then click TCP/IP Settings.

    3. Make the necessary changes, and then click OK.

    4. Click Close.

    5. Print and check the network setup page to verify your changes.

Install Printer Drivers for All Clients
  1. Insert the Drivers and Utilities CD into your computer.

  2. The Drivers and Utilities CD should launch the installation software automatically.

If the CD does not automatically launch, click Start®Run, type D:setup.exe (where D is the drive letter of your CD), and then click OK.
  1. When the Drivers and Utilities CD screen appears, click Network Installation - Install the printer for use on a network.

  2. Select Install printer on one or more remote computers, and then click Next.

  3. Enter your Administrator user name and password, and then click Add.

  4. Select the clients or servers, and then click Next.

  5. Select the network printer you would like to install, and then click Next. If you do not see your printer listed, click Update to refresh the list or click Add Printer to add a printer to the network.

  6. Select your printer from the list. If you would like to change the printer name listed, enter a new name in the Printer Name field.

  7. If you want other users on the network to access this printer, select Share this printer with other computers, and then enter a share name that users will easily identify.

  8. Click Next.

  9. Select the software and documentation you want to install, and then click Install.

  10. When the Congratulations! screen appears, print a test page to verify the software is installed correctly.

  11. Click Finish to exit.

Aug 09, 2010 | Dell 1720dn Laser Printer

1 Answer

Troy 8150 Printer


Yes I beleive you do need the -P

I use this on a HP 8150 I think it is Aust.version of you machine from the look of it

lpr -S 100.100.10.111 -P raw -o c:\temp\output.ps

Getting print q name
Press Menu until INFORMATION MENU appears on the printer display.
2. Press Item until PRINT CONFIGURATION appears on the panel.
3. Press Select to print out a configuration page

2nd page should be listed your print que name

or maybe just type the ip address of printer in browser and look in printers webpage.

Sorry for sketchy answer just trying to help!!

Oct 31, 2007 | Office Equipment & Supplies

1 Answer

Our HL-5250DN won't show up on the network as a printer anymore, but I can reach it's admin page? It's driving me crazy to try to figure this one out. Nothing about the status given on the admin page seems...


Just reinstall the Printer on the Main PC install/Setup all software again, set for shared, Then, go to the clients PC's & set up that printer for NETWORKED Printer, Browse for it... should get you back. Installing a network printer allows multiple users and computer to share a single printer, rather than having numerous personal printers throughout the home or office. When installing a network printer, make sure it is located in a centralized place so that all users can access it conveniently, then install the software on each machine. You may find that newer versions of Windows may already have the necessary drivers installed. Finding the Printer on the NetworkTo install the printer using an IP address, go to Start>Control Panel>Printers and Faxes and then click the Add Printer icon. Next, clickCreate a new port, then select Standard TCP/IP Port from the drop-down menu. You will then be asked to enter an IP address. Enter the IP address of the print server and click Next. You will be asked to select the printer manufacturer and the model from the list. If you do not see your printer listed, insert the disk that came with the printer and click Have Disk.
If you do not know the IP address of the printer, you can sometime select Browse for printer in the beginning of the process. If the networked printer is attached to another computer is being shared, you will need to enter the name of the computer followed by the share name of the printer. For example: \\computername\printername.
Spending extra on a network printer can save you money in the long run. Network printers can be higher grade and print cartridges can last longer than personal ink jet printers.

Feb 16, 2010 | Brother HL 5250DN Laser Printer

1 Answer

When Verizon installed a new a new service I lost computer-printer communication. Do you have updated software to re install the print server again? Thank you for your help


you need to reinstall you print server

following is steps to reinstall print server
1. connect printer to print server with USB cable
2.print server to computer with CAT5 cable
3.put the CD (which you got along with print server) in computer
4.follow instruction step by step
5.It will asked you for IP address, you need to assign IP which is withen the range of your verizon modem(for example 192.168.0.50
after that it going to work

regards
prakash

Feb 12, 2010 | NetGear WGPS606 (WGPS606NAR) Print Server

1 Answer

Netgear ps121 won't print


Possible reason why you cannot print with the print server is because the computer is not getting a valid IP from the router or a firewall is installed in the computer. You have to disable all firewalls installed in the computer.

For the print server setup, please follow the steps below:

Note: Before setting up the print server, make sure that you can print when printer is connected directly to the computer.

1. Wire the print server to router. Check the lights on it. It should have the ACT light on and the Error light off.

2. One way to test if the printer would work with the print server is to reset the print server for 3 to 5 seconds while it is powered on and after you release the button, the printer should automatically print the IP address of the print server.

Note: If the printer did not print, there is a possibility that they are not compatible. However, you may still continue to try to set up the print server.

3. Install the PS121 software.

a. Power on your computer, let the operating system boot up completely, and log in as needed.
b. Insert the Resource CD for the PS121 into your CD-ROM drive. The CD main page shown at the right will load.
c. Click Install Software.
d. Click Next and follow the software installation utility prompts to complete the software installation.
e. When prompted, restart your computer to complete the installation.
f. When your computer restarts, click Finish to run the Print Server Setup Wizard.

4. Run the Print Server Setup Wizard to Set Up a Fixed IP Address for the PS121.

a. The Print Server Setup Wizard screen should be displayed.
b. Click Next to proceed. The Print Server Wizard will now search your network for the PS121. If the Print Server Setup Wizard cannot find your PS121, check the network connections and status lights on the PS121.
c. The “Server Name” and the “IP Address” your network assigned to the PS121 are displayed. Click Next to proceed to the device name screen.
d. You can enter a descriptive Device Name and Domain Name or accept the defaults. Click Next to proceed to the IP Address configuration screen. The Print Server Wizard displays a recommended static IP address setting for the PS121. This is usually fine.
e. Click Next to proceed.
f. Click Finish to exit the Print Server Setup Wizard. This completes the configuration of the PS121 for operation on your network.
g. Click Yes to run the Add Printer Port Wizard. Follow the instructions in the next section for using the this wizard to set up each computer to use the PS121.

To set up each computer to use the PS121, please follow the instructions below:

1. Use the NETGEAR Add Printer Wizard to set up each PC to use the PS121.
a. When the Print Server Setup Wizard finishes, you are prompted to run the Add Printer Port Wizard. Click Yes to proceed. Alternatively, from the Windows Start menu NETGEAR Print Server program group, you can run the NETGEAR Add Printer Wizard.
b. After a short delay while the software searches the network for your PS121, the Printer Select window opens and displays the PS121 you have set up.
c. Click Next to proceed to the Port/Printer name screen. Take note of the printer model number listed.

2. Set up the correct printer driver for the printer port.
a. Click Next to proceed to the Port/Printer name screen. Take note of the printer model number listed.
b. Click Next to proceed to the Select Printer screen. If you see the exact printer model number listed as the printer model number from in the previous screen, click it to select it from the list.
c. If prompted, print a test page to verify operation of the printer and the PS121. Then, close any remaining Add Printer Port Wizard or Windows Add Printer Wizard windows.

Use the NETGEAR PS121 Mini Print Server Resource CD to run the Add Printer Port Wizard to set up each PC on you network that you want to use with the PS121. Select the port you added

You may also use the links below as your guide to troubleshoot the print server:

http://kbserver.netgear.com/kb_web_files/n101269.asp

http://kbserver.netgear.com/kb_web_files/n100033.asp

However, if this does not resolve the issue we will need to get some additional details from you to be able to assist you further. I have summarized my questions below:

1. Model number of router
2. Model of printer
3. Operating system of computer/s


May 01, 2009 | NetGear PS121 Print Server

1 Answer

Not Printing. Reinstalled the software, reset printer to factory


If you are running Leopard, reset the printing system by control-clicking in the list of printers in the Print & Fax preference window. Then reinstall the drivers.
Apple Menu > System Preferences > Print & Fax. Control Click in the left area which shows the list of printers, and choose "reset the printing system"
macs2u

Apr 04, 2009 | Canon PIXMA MP600 all-In-One InkJet...

1 Answer

PSC 2175 wont work with print server


Please make sure that the printer is working okay if directlysd connected to the MAC computer. You may try this as well. hope this helps

Description
LPR (line printer remote) is a platform independent printing protocol that is associate with TCP/IP. It works by using LPR client software that communicates to a server running LPR services.

In terms of PSU, LPR printing will become the basis for all network printing while Novell print queues are phased out. Therefore, all Macintosh, Windows, and Unix computers will be configured to print through LPR.

Requirements

· The name of LPR print queue. This can be found by searching the LPR printer database.

· LaserWriter print drivers version 8.5.1 or newer

· The Macintosh must have a working TCP/IP networking configuration. (If the Mac can browse the web then it's working.)

· a server running LPR services or a printer that supports LPR printing. Most HP LaserJet printers support LPR. However, only the following LaserWriters support LPR printing:

- LaserWriter 8500
- LaserWriter 16/600 PS
- LaserWriter 12/640 PS
- Color LaserWriter 12/600 PS
- Color LaserWriter 12/660 PS Procedure

1.Open up the Applications folder from the OS X menu.
2.Open up the Utilities folder
3.Now open up the Print Center
4.If you have no printers installed you will see the following screen. Click on Add.
5.On the following screen, select LPR printing.
6.Now enter printhost.oit.pdx.edu for the LPR Printer's address.
7.Uncheck Use Default Queue on Server option and enter the queue name of the printer.
8.Select the printer model.
9.The completed settings should be similar to the following:
(LPR Printer’s address is the ip of our PRINTSERVER)
10.Click on Add
11.Your printer has successfully been installed. Test the printer by printing something to it.

Mar 29, 2009 | HP PSC 2175 All-In-One InkJet Printer

1 Answer

Prints only last pages


Try reinstalling updated printer drivers .


If you do not have the disk you must download the software from Internet, follow instructions below,

Click here:Official Lexmark Drivers and Software

A web page will open, follow instructions, select model, select operative system etc., and click on download .
Chose to download the file in my documents when asked.
After downloading, find the file,double click on the file ,then if you get in troubles, follow the instructions below to reset and reinstall drivers:

  • Unplug printer USB.
  • Go to control panel >> installed printers in Windows and remove (delete ) any installed printer from printer list.
  • Download driver from website, or use the disk and run the install file.
  • Follow driver installation wizard.
  • Plug back printer when prompted from installation wizard.

Mar 07, 2009 | Lexmark X2470 All-In-One InkJet Printer

1 Answer

Printing Problems


Re install the software.
In so doing follow this routine
1. go to start/Faxes and printers remove the existing default printer.
Come off line and disable your anti virus software
Click on add printer and reinstall the software.
If you have no disk for example- use the install from list feature and install from the driver library

Dec 30, 2007 | Office Equipment & Supplies

4 Answers

Cannot print with wirelessly networked printer


hi,

if printing from 2 other computer works fine, will i think its not an issue of IP address which changes somehow. but anyways, try to check if you still have other printer drivers under "PRINTERS" (see control panel). it should say HP Photosmart c6100 series. If you also have there a printer icon that says HP Photosmart c6100 series Copy1, try using it (right click on that icon and choose Set as Default Printer). If you only have HP Photosmart c6100 series under PRINTERS, try to right click, then choose properties. When Properties box is open, click on PORTS tab. then click on configure ports below. Try to type in the IP address of the printer under "Printer Name or Host name or IP address". make sure that you already printed network configuration page to get the exact ip address of the printer, Dont know how to print? do this.

PRINTING NETWORK CONFIGURATION PAGE
1. press setup, then scroll down and look for Network.
2. press okay on network, it will give you the first option "VIew network settings".
3. press okay on it, and it will give you the first option "Print network configuration page."
4. choose that and press okay. it will print the network config page. from this document, you will be able to see the IP address of the printer.

Please let me know if the issue is still not resolve so that i can go ahead and give you another possible solution.

Thank you so much.

adonscott

Aug 08, 2007 | HP Photosmart C6180 All-In-One InkJet...

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1973 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...