Question about Mitsubishi WD-52525 52" Rear Projection HDTV

1 Answer

The lamp light is still on after replacing the

The lamp light (gold not red) is still on after replacing the lamp. We have taken it out and replaced it and also have reset the TV several times, but light continues to stay on.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 64 Answers

Plug the TV out of the wall. Wait. Plug it back in. Does it still stay on? If not, there is somethign wrong with your remote, or the TV circutiry is not shutting off. Try controlling the on/off via manually pushing the power button on the tv (both on and off).

Posted on Aug 01, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ive just bought a new bulb for my projector (Optoma HD700X DLP Projector), taken the old one out and screwed this one in, but im still getting a read light when i turn it on, it sounds like it is...


Hello
if replacement lamp has done, was the lamp timer reset after replacement? and if the lamp is original, there is either a bad lamp or a cooling problem.
Good luck

Dec 14, 2010 | Optoma HD700X DLP Projector

1 Answer

I just replaced the lamps and the lamp 1 and lamp 2 lights are flashing red. the projector won't fire up.


The lamps are not in correctly. When the old lamps are taken out, it reveals two very small lever type switches that have to be down for the lamps to connect and for the projector to recognise the lamps. These switches can be seen in the section in between where the lamps go. They are about 4mm. Hope this helps. It happened to me.

Sep 17, 2010 | Eiki EIP-5000L 5200 ANSI Lumens DLP XGA...

1 Answer

HITACHI ULTRAVISION DIGITAL TV.MODEL NO: SP60WS lamp light is red


The lamp should be replace to fix the no picture since the lamp light is red.
Download the user's guide and see pages # 69-72 for lamp replacement.

Jul 10, 2010 | Hitachi 60V710 60" Rear Projection HDTV

2 Answers

Just replaced lamp. when plugged in, power light


hello make sure the lamp is fitted securely and the lamp cover aswell

regards
shaun

Jan 16, 2010 | Panasonic PT-50LC13 50" Rear Projection...

1 Answer

Replacement lamp - Mitsibushi


Did you get the lamp door back on properly? There is a switch that when the door is taken off the switch there keeps the set from coming on.

Jan 05, 2008 | Panasonic PT-56WXF95 56" Rear Projection...

1 Answer

KDF-55W655


red light blinks in 5 times then pause and then repeats. It is the lamp error. " Lamp Driver Defect"
When the "LAMP-PORT" (pin 95) is low, the lamp is not turned on. If the "LAMP-HV-DET"(pin 96) is low at the same time, it is classified as no high voltage of the lamp driver. I'm guessing it needs a Lamp driver which I think is on the C Board, which is part of the "Optics Unit Block Assy. The C Board cannot be orderd separately, and Optics Unit Blocks are not cheap. Good luck
Bobby G aka poolmvp1

Oct 31, 2007 | Sony Grand WEGA KDF-55WF655 36" Rear...

Not finding what you are looking for?
Mitsubishi WD-52525 52" Rear Projection HDTV Logo

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1213 Answers

The Knight
The Knight

Level 3 Expert

74459 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...