Question about Husqvarna 22 Hp 46" Deck Yard Tractor

1 Answer

Concerning Husqvarna LR120 lawn tractor. Gears will not engae.

I have just replaced the drive belt. Gear shift will move smoothly when engine is switched off.
With engine running it is almost impossible to engage or change gear.
I have checked that the rear pulley does not rotate when clutch/brake pedal is deprressed.
Help!

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 389 Answers

Recheck your installation. It sounds like you perhaps got the belt on the wrong side of one or more belt guides. If you need an owners manual, post your full model and serial number and I will see if I can locate one for you

Posted on Sep 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My RZ4623 will not move.


If the unit stopped moving at once. I suggest checking the belt. It is very unlikely both Hydro-Gear units would fail at the same time. check under the mower, and check on top of the transmissions, you should see the drive belt running between both transmissions and the engine.

Feb 15, 2015 | Husqvarna Rz4623 46" Ztr Lawn Mower Zero...

1 Answer

Craftsman 917273482 will not shift into gear, and I can't push it because it won't disengage


If there is too much play in the drive belt due to belt stretch or linkage wear, the belt will be too loose to drive the tranny but still cause the tranny input shaft to rotate preventing it from being put into gear.
Do the gears grind when trying to put into gear? With engine off you should still be able to push the machine if you put it in neutral. Unless, of course it is a hydrostatic transmission, in which case there should be a lever to push/pull which will put the hydrostat in neutral. This is all assuming that it is a hydro and while running the machine won't move when putting the drive lever into forward or reverse.

Mar 24, 2014 | Craftsman 20 hp 42 in. Deck Lawn Tractor -...

1 Answer

My husqvarna mower has quit moving. The engine runs smoothly but when I shift out of neutral, nothing happens. It stopped working suddenly. I have moved the small lever in the back that allows you to...


either the drive belt from the engine to the top of the transmission has broken or gone slack due to a tensioner issue, or the transmission has failed. with the engine NOT running you can put your hand up under the deck and feel the topmost belt, if it is there and snug, then you have a transmission problem and that requires a replacement.

May 25, 2011 | Husqvarna Riding Lawn Mower Yth24v48ls 48...

3 Answers

I have Model YTH2548 riding mower. The RPM's are set as high as they will go but the mower moves along very slowly. Could the drive belt be slipping? Is there a tensioner pully that may need to be...


When you raise the front or rear of the tractor, and push on the belt (engine off of course), is there a lot of play or slack in the drive belt. At this point from what I have read, the issue is the drive belt, and is slipping when in gear and when it heats up. The next thing to do would be to replace the belt, but I not sure if this procedure is an option for you. When you inspect the under side of the tractor, and inspect the moving parts and pulleys, if any of these components are in need of replacement, you will be able to tell by either rotating them manually or visually inspecting them. At this point due to the low hours, I suspect the drive belt is stretched out, and is considered a maintenance replacement part procedure.

Jan 20, 2011 | Husqvarna Lawn Tractor 48" Deck, 23 Hp,...

1 Answer

Husqvarna CT151 Smoking


the belt is smoking because a pulley isnt spinning like its supposed to. its gonna break the new belt if you don't remedy the problem. try taking the belt Back off. then see if you can spin the pulleys by hand with no belt .

Jul 31, 2010 | Husqvarna Lawn Tractor 48" Deck, 23 Hp,...

1 Answer

I have 2001 Husqvarna lawn tractor model YTH1746 wnt go into gear


those fluid drive transmissions fail on quite a few brands as they all use the same ones....replace the trans...they are expensive but still cheaper than a new mower.

Jul 21, 2010 | Husqvarna Ariens 46 In Deck 20 HP Kohler...

2 Answers

Craftsman 42 '' 19.5hp lawn tractor gear shift will not engage. Engine and blades work fine but cannot put tractor in gear.


the belt is bad if not there is trouble in the drive shaft.Thank you for asking and I hope this helps you.Please leave me a 4 thumbs up.

Jul 20, 2010 | Craftsman 42 in. Deck 19.5hp Lawn Tractor

1 Answer

Problem shifting


If the shifting is easy when the engine is off you have an adjustment to make on the clutching mechanism. if you loosen the belt (the adjustment is under the mower) it should improve the shifting but do not loosen it too much to where the belt begins to slip when in drive.

Jun 07, 2010 | Craftsman 17.5 hp 42 in. Deck Lawn Tractor...

1 Answer

The gears are very hard to shift


you need to put dope in trans and check gear shifter to see if it is loode if not check your drive belt

Apr 23, 2010 | Craftsman 17.5 hp 42 in. Deck Lawn Tractor...

4 Answers

MTD Lawn Tractor problem


The front belt should be a 954-0280A, rear 954-0370. When you go to higher gears, the front belt should be getting tighter as the vari-speed pulley is moving further back. Remove the shift plate, put the transmission in neutral. Start the engine, put speed selector in highest gear and slowly let out on the clutch. You should be able to see what the problem is. It will do everything the same as if were in gear, except move. Make sure you have the correct belts.

Jun 28, 2009 | Mtd LAWN MOWER PART # 753-0698 KIT-DECK...

Not finding what you are looking for?
Husqvarna 22 Hp 46" Deck Yard Tractor Logo

457 people viewed this question

Ask a Question

Usually answered in minutes!

Top Husqvarna Garden Experts

Phil Walker
Phil Walker

Level 3 Expert

605 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Roland W VanLue
Roland W VanLue

Level 3 Expert

486 Answers

Are you a Husqvarna Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...