I don't want to use ePrint. If I turn it off can I still use in furture?
A plain paper setting will print in plain paper normal
go to printer settings and set to normal print
type in --www.hp.com/ctg/manual/c037789822.pdf --for a pdf version manual down load
or go google and type in- can e-all-in -one printers be set to print normally and there are sites that show up including the one I mentioned
1. Turn Off
printer, cable power still plug in.
2. Press
Stop/Reset button, don't release the button.
3. Press Power
button by holding without release and than release Stop/Reset Button.
4. Press
Stop/Reset button two times (2x) now release the Power Button.
5. Wait until
service mode to zero (0).
6. Turn off
the Printer, cable power still plug in.
7. Press
Stop/Reset button, don't release it.
8. Press Power
button don't release & than release Stop/Release button.
9. Press
Stop/Reset button four times (4x), wait until service mode to "1"
10. Turn off
printer, and loose cable power, wait for one (1) minute.
11. Connect cable power, turn on printer again, now this printer ready to use.
59 views
Usually answered in minutes!
×