Question about Dyson DC07 Bagless Upright Cyclonic Vacuum

1 Answer

I need instructions on how to replace filters in the dc07 please

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 83 Answers

You first need to purchase a filter. When you have it, stand in front of the machine.
- Look at the right-hand side wheel. To the left of it there is a lever with ridges/ribs and a half-moon shaped top with a an arrow image on it. Push the lever. The filter housing will open. Take it off and turn it around. On the inside you will see something that looks like a slice of orange with a half-moon hole in the middle. Put your finger directly into the entrance of the hole and lift the filter out. You can now replace the filter or simply just wash the old one. You can take the gray (should be blue) foam piece out of the yellow housing (orange slice) and wash that as well in cold water. Leave it out to dry and only put it back in the machine when it is dry.

Posted on Jul 29, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No sucking when the handle is down


Hi Steven, it's Jack at Dyson.

If your machine isn't picking up from the cleaner head, this may be due to a blockage. The filter may also need a wash. To check for any obstructions, please follow the steps shown in our online Support guide: http://www.dyson.co.uk/support/dc07/dc07-animal/my-machine-is-not-working/machine-not-sucking-picking-up-as-well-as-usual/how-to-wash-filters/wand-suction

In normal use, DC07's filter needs to be washed at least once every 3-6 months, as shown in the video attached. Use cold water without detergent, and allow at least 12 hours for the filter to dry completely before replacing it.

If you do need any further advice after you've given this a try, please get in touch with us directly. You can reach our experts by calling 0800 298 0298 (UK), or 1-866-693-9766 (US).

Best wishes,

Jack
Dyson Online Customer Support
www.dyson.com

Aug 12, 2013 | Dyson DC07 Animal Bagless Upright Cyclonic...

Tip

Dyson DC07 - Washing the filter


To wash the pre-motor filter in your Dyson DC07, please follow the simple steps shown in the video below. This procedure applies to all Dyson DC07 variants.

The filter should be washed every 3-6 months using cold water. Always ensure the filter is totally dry before refitting it - this may take up to 24 hours.

For further help and advice please visit www.dyson.com and click on Support.

Dyson Customer Service


on Jun 22, 2011 | Dyson DC07 Bagless Upright Cyclonic Vacuum

1 Answer

Where do I find instructions to replace the roller brush on my DC07 Animal


Hi there,
VacuumGuru here. I have made a video on how to check your clutch and brush roller.
Please take the time to rate the solution or give me a thumbs up.
If you need to buy filters or belts for your Dyson DC07 I would go to Vacuumspot.com.au or NelsonVacuums.com.au
Hope this helps :)


Oct 16, 2010 | Dyson DC07 Animal Bagless Upright Cyclonic...

1 Answer

My dyson DC07 Hepa will not stand by it self Some


Hi there, I have made a video of the solution to this problem. Just click on the link and follow the instructions. If you need to replace any of your vacuum filters you can find them on vacuumspot or nelsonvacuums both ship worldwide.
Hope this helps!.. And if it did please take the time to leave a message or give it a thumbs up.

Sep 08, 2010 | Dyson DC07 Bagless Upright Cyclonic Vacuum

1 Answer

How do i replace the clutch assembly Dyson DC07 Bagless Upright


Hi there,

I have made a youtube video that you can watch at vacuumsmart.info If you find it helpfull please take the time to leave a review for me here or message me on the site.

Also if you need parts for your Dyson DC07 such as filters you can go to www.vacuumspot.com.au or www.nelsonvacuums.com.au

Hope this helps :)

Jun 12, 2010 | Dyson DC07 Bagless Upright Cyclonic Vacuum

2 Answers

Vacuum is about 4 years old does not pick up well


Have you ever replaced the belt? That is most likely the reason that it is not picking up like it used to. You are actually supposed to change the belt yearly. Here is the belt you need and the manual which has instructions:

Dyson DC07 Belts and Manual

Dec 31, 2009 | Dyson DC07 Animal Bagless Upright Cyclonic...

2 Answers

We have the pink dyson and we have washed out filter, but it sounds like it is sucking air and it will not pick up, what would you suggest we try nest


You need to replace the belt. If the belt is stretched, worn or broken it will not pick up well, even if there is good suction. Here is the belt you need and the manual which has instructions:

Dyson DC07 Belt and Manual

Dec 28, 2009 | Dyson DC07 Animal Bagless Upright Cyclonic...

1 Answer

Trouble picking up particles yet no blockage


If the belt is stretched, worn or broken then it will not pick up well. Here is a link for the instructions on how to change the belt and a link for the belt you need:

DC07 Belt Changing Instructions

Replacement belts for DC07

Nov 23, 2009 | Dyson DC07 Animal Bagless Upright Cyclonic...

1 Answer

The belt broke


You need to replace it with a new one. Here is a link for the instructions on how to change the belt and a link for the belt you need:

DC07 Belt Changing Instructions

Replacement belts for DC07

Nov 15, 2009 | Dyson DC07 Bagless Upright Cyclonic Vacuum

Not finding what you are looking for?
Dyson DC07 Bagless Upright Cyclonic Vacuum Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dyson Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18408 Answers

Samyfam
Samyfam

Level 3 Expert

379 Answers

Are you a Dyson Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...