Question about E-Machines eMachines Desktop PC

1 Answer

My emachine wont boot up it has never booted it was sent to factory and returned still not booting

Posted by on

  • 2 more comments 
  • bcapps940 Jul 13, 2009

    on the self screenit goes to ip address for etho fail
    no link present and stale nfs file handle

  • bcapps940 Jul 13, 2009

    ip address n0 link and stale nfs file handle

  • dewey wyatt May 11, 2010

    does it post video at all? can you see the p.o.s.t. power on self test screen? three things come to mind, power supply not delivering enough current, bad ram or processor, or a bad board.

  • kishor
    kishor May 11, 2010

    which error comes?

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

One question that I have is did you ever have your computer hooked up to a dialup service through your internal modem? If so that could be the problem. alot of the times the modem may get a surge and cause it to fail. As a failsafe the modem will not allow the computer to boot. I would try to disconnect the modem, and see if this fixes the issue.

Posted on Jul 13, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Password lost how do i reset pc to factory


Use the windows 7 reinstall disk that came with your computer...or return it to its owner and go buy yourself your own PC and stop stealing jk...

Dec 11, 2014 | Acer eMachines Black EL1352G-41w Desktop...

1 Answer

HOW DO I FIX A EMACHINES G52W BOOT SEQUENCE AND SETUP SO I CAN GET TO THE INTERNET ?


I believe you might want to set the boot to

1 DVD (first)

2 SATA Drive (second) Maybe you didn't have this listed as 2nd.

If you have a disk in the DVD drive it will say press any key to boot from the DVD drive.

Oct 02, 2014 | E-Machines eMachines Desktop PC

1 Answer

I'm trying to download E728 recovery disk but my serial/SNID no isn't recognised


If you have done a Factory Recovery, all your date is gone. You have formatted the HDD. You must start from the beginning, do all your Windows and eMachine updates. In Windows 7 you will find a folder, "Windows.old", after you have finished ALL the updates, do a Search for Windows.old, you will find SOME of your old data. If the Laptop didn't complete the Recovery process, try again. Where did you download the e728 Recovery disk from? Is it a boot disk? A ISO disk? You may have to contact eMachine support, using your Serial Number, order a Factory DVD to return the Laptop to Factory Settings.

Apr 20, 2013 | eMachines Computers & Internet

1 Answer

Wont boot up properly looking to reformat


Check and see if there's a Disk in your CD/DVD ROM Drive. I assume there's on in there that has some bootable files and your computer see's it and is asking to boot from it. Usually it will say something like "Press any key to boot from CD" so if you don't want boot from that CD just don't press any keys.

Feb 07, 2013 | E-Machines eMachines Desktop PC

1 Answer

I want to to return my emachine to factory settings..Have the T2958 ver 1.1 restore dvd. Won't auto run- I click on the icon and its just text. Is that a command prompt?


you will need to restart the computer and boot off the restore dvd.
This is done outside of the operating system.

When computer is first turned on keep hitting f10 untill you get the boot menu up, choose the dvd drive and it should work for you.

Mar 11, 2010 | E-Machines (T2958) PC Desktop

1 Answer

Emachine starts boot process but stalls, no beeps


most likeley if you see something on the screen but it wont boot it is a mem problem, does it load bios, if so it is prob not memory

Nov 17, 2009 | E-Machines eMachines Desktop PC

1 Answer

C0000218 error code.cannot boot dell 8400 to troubleshoot problem


It sounds like you've had a fatal error - you can reboot the PC back to factory setting - this is called a hard reset - but before you do that - unplug you tower and clean it out (dust & dirt) - once you're done with that - restart you computer and press &hold down the "Ctrl" and "F11" button at the same time - this will let you reset the PC to the original factory configuration.

May 03, 2009 | Dell Computers & Internet

1 Answer

2 emachines won't boot


Are you attaching them properly
if so then it is something other then power supply
something has caused both power supplies to blow
have you installed anything in the first emachine you talk about

Jan 17, 2009 | E-Machines eMachines Refurbished EMA...

Not finding what you are looking for?
E-Machines eMachines Desktop PC Logo

Related Topics:

107 people viewed this question

Ask a Question

Usually answered in minutes!

Top E-Machines Computers & Internet Experts

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18408 Answers

Are you an E-Machines Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...