Question about Miele S7210 Bagged Upright Vacuum

1 Answer

The hose is blocked, how do I get it off to unblock?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Miele Master
  • 894 Answers

Hey, this is Tristan with Crucial Vacuum,

In order to remove the hose to start unblocking it, do the following:
1. Put the vacuum in the upright position
2. Press the release button of the telescopic wand and remove the handle from the hose
3. Push the hose elbow downward into the catch hooks.
4. Undo the suction hose by twisting it at the elbow.

If the blockage isn't in this location you can do the following to search further for blockages:

5. Open the service flap on the back of the vacuum.
6. Unscrew the screws and pull the cover free.

Below I have attached a link to the users manual for the Miele S7210. You should refer to page 30 to view the diagrams pertaining to my suggestions.

http://www.sylvane.com/media/documents/products/miele-s7210-twist-upright-vacuum-users-manual.pdf
---
You can purchase replacement parts for Miele direct from Crucial Vacuum with free shipping and an exclusive 10% coupon for Fixya.com readers, use code: FIXYA10

http://www.crucialvacuum.com/miele.html


I hope this was helpful! If you would like further assistance, please feel free to give us a call at 877.750.9239. We have helpful and friendly customer care representatives on the line ready to assist you.

Tristan Clausell
Crucial Vacuum Customer Care
http://www.crucialvacuum.com

Posted on Oct 15, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can i unblock my cleaner ?


There may be blockage in the hose or the hose may have collapsed internally.

Oct 23, 2014 | Vax C90-M1-C Mach 1 Complete Multicyclonic...

1 Answer

Panasonic unblock


clean out the hose that connects the beater bar to the rest of the hose you have it clogged these kinds of problems can easily be seen DU

Apr 14, 2014 | Hoover Vacuums

1 Answer

Won't pick up water from the clean water side


I couldn't view u'r clip but it seems if the pipe is blocked try to remove the blockage by using a hose where you spray hot water and normal dishwashing liquid, through the pipe, to unblock it. Just do not immerse the whole machine in water! Because I do not know what machine you have. Good luck my friend!

Mar 23, 2013 | Vacuums

1 Answer

Dyson DC25 Animal Hose Not Picking Up


Hi Ben,

I'm sorry to hear you're having difficulties with your DC25. From what you've described, it sounds as if there may be a blockage in the wand or hose. To resolve this, please follow the steps shown in our online Support guide:

http://www.dyson.co.uk/support/dc25/dc25-multi-floor/my-machine-is-not-working/machine-not-sucking-picking-up-as-well-as-usual/filter-washing-video

If the wand is difficult to reattach to the machine, it may be because the hose has become twisted during use. Remove the wand and allow the hose to straighten itself out before refitting the wand.

I hope this helps - if you'd like any further assistance or advice, please call our customer Helpline 0800 298 0298 (UK), or 1-866-693-9766 (US).

Best wishes,

Jack
Dyson Online Customer Support
http://www.dyson.com

Mar 29, 2012 | Dyson DC25 Animal Bagless Upright Vacuum

1 Answer

Machine running hot. new bag but red flag indicator is fully closed at stsrt up. Runs but overheats and shuts off and red reset light comes on


you may have a blockage in either the hose, the telescopic wand or the power nozzle/floor attachment. The easiest way to tell, as you have a new bag in there is to disconnect the hose and start the machine. If the suction is good there, start to narrow it down. Take apart the hose from the telescopic wand, take the attachment off and look through the wand. Look in the connection on the attachment as well. If not there, look inside both ends of the hose, you may need a flashlight for this, and see if there is anything blocking there.

If the hose is blocked, you can try to unblock it by turning the machine on and inserting the handle into the machine where the hose would attach to the unit. Sometimes this reverse of suction is enough to dislodge whatever is in the hose.

Good luck

Nov 18, 2010 | Miele S548 Bagged Canister Vacuum

1 Answer

No suction and blowing back


Disconect Vacuum hose from cleaner take out in the yard and pock the garden hose or any hose down the Vacuum pipe this will unblock the machine also clean around the brush. Hope this helps.

May 17, 2010 | Vacuums

1 Answer

No suction


there are two reasons for this 1 is the belt in good order 2 thevac is blocked unblock then trouble free

Aug 12, 2009 | Hoover U6630-900 WindTunnel Bagless...

1 Answer

Dyson DC01 Blocked Hose


unclip the hose and push a garden hosepipe throughit. that will clear any blockedge in the dco1 hose.

Jan 07, 2009 | Vacuums

1 Answer

How do I unclog a bissell vaccum? I'm not just talking about unclogging the hose, I need to unclog the complete vacuum cleaner. HELP!!!


Well firstly, whats the model number and do you have the user manual to hand?

If the main hose has been unblocked, then it could be the main dirt channel which is blocked just after the moving roller brush panel. A long pipe cleaner or wire brush can remove this blockage easily rather than taking everything apart.

Apr 18, 2008 | Vacuums

2 Answers

Hose stopped up


If the hose comes off, you can push something thru to help break it up. You also use a plumber's snake to grap ahold of what is in the hose and pull it out.

Jan 15, 2008 | Panasonic MC-V5481 Upright Vacuum

Not finding what you are looking for?
Miele S7210 Bagged Upright Vacuum Logo

495 people viewed this question

Ask a Question

Usually answered in minutes!

Top Miele Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22413 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1474 Answers

Are you a Miele Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...