Question about Samsung CLP-550N Laser Printer

2 Answers

Samsung clp 300 shows waste tank full

Samsung clp300 shows waste tank full

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 400 Answers

You will have to buy a new waste tank/bin for it as the old one is now full.
They are relatively cheap.
It looks like this:
http://www.cartridgesave.co.uk/CLP-W300A.html
If you don't want to spend any money you can remove it and try to empty the powder into a bin but it can make a big mess.

Please rate the answer if it helped you.
Thanks

Posted on Jul 13, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Empty the tank and flush it out with warm water then put a drop just a drop of fairy liquid with 1/2 cold water shake and then rinse thoroughly with clean cold water then leave in a warm place until fully dry.
re install in the printer and away you go saving 10 pounds 15 dollars

Posted on Feb 09, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I emptied the waste toner and the red light is still on....samusng clp-300 which says that it is full


Sometimes just emptying the waste toner tank will not clear this fault. The printer uses a light sensor to determine when the tank is full. You will need a cotton swab and clean the part of the tank that the sensor is viewing the tank. Try to clean the clear window of the inside of the tank. It can be difficult since the placement of the window with respect to the tank opening. Other way is to try to wash out the inside of the tank with soap and water which can be messy but it will do a better job. Hope this helps.

Oct 23, 2010 | Samsung CLP 300 Laser Printer

1 Answer

Hello, I was printing a 30 page document on my samsung CLP300 printer and it quit printing after 20 pages. It does not indicate that it has a low ink cart. and I see no signs of a paper stuck anywhere (I...


There are many reasons that causes this printer to stop printing, like empty toner cart, full waste toner cart, paper jam. The only way to know for sure is to use the smart panel program to see what the printer is sensing as a problem and go from there. Hope this helps.

Oct 07, 2010 | Samsung CLP 300 Laser Printer

1 Answer

MY CLP300 IS SHOWING ERROR WASTE TANK FULL BESIDE THAT I HAVE EMPTED IT PROPERLY


Dear ,
u need to empty it properly by ceaning the transparent window.
or else change it.

Sep 27, 2010 | Samsung CLP 300 Laser Printer

2 Answers

Waste tank is full for my samsung CLP-300 printer. i don't know where is the waste tank located and how to clear the waste tank.


The waste tank is inside the front cover of the CLP 300 on the left of teh four toner drums. Itgoes down the side and then along the bottom. You can empty it into a bin and then reuse the same container. No need to buy a new one

Jun 25, 2010 | Samsung CLP 300 Laser Printer

1 Answer

Samsung CLP 300 Printer


smasung clp300
just clean toner weast chember and also drum unit.

sometime if u user refilled cartridges after use this u have facing this porblme.
pl do this it work perfect.

www.howtorefill.com

Jun 02, 2010 | Samsung CLP 300 Laser Printer

1 Answer

Phantom paper jam . Samsung clp300. Flashing red light


you clean your printer drum unit wast ink poder drum open and wast ink

Jul 21, 2009 | Samsung CLP 300 Laser Printer

1 Answer

CLP300 Waste tank


Just found the troubleshooting manual for the printer and emptied out the waste tank. Seems to work fine now.

Aug 31, 2008 | Samsung CLP 300 Laser Printer

2 Answers

Samsung CLP 300 won't print


a few seconds after turned on?
after a half hour ?

in the first case it indicates a problem most likely with the fuser.
in the second case it might be on a timer.

Aug 05, 2008 | Samsung CLP 300 Laser Printer

Not finding what you are looking for?
Samsung CLP-550N Laser Printer Logo

1,934 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Office Equipment & Supplies Experts

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

HEMANT GROVER

Level 2 Expert

167 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Are you a Samsung Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...