Check out if there is any small hole on the surface of cd changer.. Then take one safety Pin and insert it inside the hole.. after than press slightly inside the hole ... then u will be able to take out cds
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
There is a "compulsory eject hole" on the left side of the changer. Inserting a screwdriver straight into this hole should eject the magazine unless a disc was partially deployed when power was removed.The last page of the manual shows a picture that details which hole to use.
The manual can be found at: http://resources.jvc.com/Resources/00/00/98/LVT0580-001A.pdf
if you push the eject cd magazine button on the changer does it sound like it's trying to eject it? if it doesn't you'll need to replace the changer. if it does, then you've got a stuck cd magazine tray. it sounds weird, but when i was working on land rovers this happened all the time on the full size range rovers. what we did was push the magazine eject button on the changer to eject the cd magazine and sort of slap the changer around a bit. 90% of the time it worked. the other times, we'd go in with a 90 degree pick and try to push the stuck cd tray back into the magazine (while it was still in the changer) while pushing the eject magazine button on the changer. and you'll need to replace the cd magazine. if it happens again, you'll need to replace the entire changer.
I had the same unit, with the same issue. Unfortunately, There is no way to eject the magazine without power to the unit. I took the unit to a stereo shop where they plugged it into a control unit (powered off), powered up the system and ejected the magazine for me.
hi there that is sorta the problem i had and if you press eject nothing happens its still in there what i done was disconnect the battery for at least one minute and the cd changer lost its memory and was fine so i ejected the cd magazine and cleaned all the cds and blew out inside the machine has worked everytime its woth a try