Change Date/Time on Canon Fax L350

Lift the flap on the right-hand side of the fax machine.
Select Data registration
use the down arrow
1. Data registration
SET
1. User Settings
SET
1. Date & Time
SET
Enter date or time
SET

Good Luck!
Hope this helps!
CreativeTECH

You can download the software for this unit from this link.

http://software.canon-europe.com/products/0000502.asp

On the right side there's a flap that u can lift up!Press data registration and set,it will say user setting,press set,and it will say date and time,press set,change it and press set again,and press stop!

http://safemanuals.com/user-guide-instructions-owner-manual/CANON/FAX-L350-_E
Hope this is what you were looking for.

Canonusa.com you can download drivers.

I’m happy to help further over the phone at https://www.6ya.com/expert/jayw_0e86fb055a7b73de

Press the funcktion button select data registration.Under usersettings you willfind he date and time settings.

http://software.canon-europe.com/products/0000502.asp

Select OS and download.

open the side door
press data programing
data regretion
user data

Maek sure machine is switched on and there is a display showing.
1. Open the 'one-touch' speed dial panel (plastic flap to right of main number keys)
2.Press the key 'data registration' The display will show "REGISTRATION 1. DATA REGISTRATION"
3. Press 'Set' key twice (lower right key on grey centre panel area). The display will show "DATA REGISTRATION 1. USER SETTINGS" after the first key press, then "USER SETTINGS 1. DATE & TIME" after the second key press.
4. Press 'Set' again, then use the numeric buttons to type in the correct date and time - you should get something like 11/01 2009 and 16:09 in the display (use 24 hr clock for the time).
5.Press 'Set' to save the date and time the display will show "USER SETTINGS 2. UNIT TELEPHONE #"
6. Press the 'Stop' key to return tot he machine's normal 'standby mode' .
7. Print off this webpage so that you can remember how to change the time for daylight saving time changes etc... or int hee vent of a power cut.

Hope this helps.

If you go here: http://support-sg.canon-asia.com/index.jsp?fuseaction=support&prod_type=laser_fax_aio&page=download
You will be able to download the driver for that.
Hope that helps...