Question about Magic (ED8000) Professional Microphone
My mic just stopped working. I've plugged in as per manual instructions. When the 'on/off' button is pushed, a flashing line occurs on the TV, no sound or pic shows. I also noticed that the green LED doesn't light up when I turn the mic on. I assume there's connection b/w the TV and the mic, but no sound or pic appears. Can you pls help???
ED 9000 does not have any battery compartment. its a fixed cord with adaptor 8 volts.
try removing any song chip inside then turn it ON. inverted song chip or dirty song chip wont make it work or make it turn ON.
if still the same i believed reprogramming is necessary, since the data is already corrupted.
if there is background music and video but no recognition of the mic to your voice- the the problem is the "voice coil". need to replace the voice coil.
Posted on Mar 09, 2009
Could be the wiring in the RCA cable.
Swinging mike to and fro can wear through the power wiring inside the cable.
I'm on my 3rd cable.
Manufacturers have said they recognise this is a common fault with product but it seems they are not taking any steps to rectify.
I found that using the mike with batteries sometimes works.
If you get a new cable may be a good idea to reinforce the top 12 - 18 inches of the cable to avoid same problem in future.
Posted on Apr 24, 2008
Tips for a great answer:
Sep 19, 2011 | Rode NT1A Professional Microphone
a microphone with computer
To use any microphone with your
computer you will need to enable it in control panel. The following
instructions are for Windows XP but are broadly similar for Vista
Click START, CONTROL PANEL, SOUNDS
& AUDIO DEVICES
Now click the VOLUME button in the
SOUND RECORDING BOX. Here you need to SELECT microphone as an input source for
recording (as opposed to un-checking mute in the playback
controls). If your webcam/ microphone is built in to the laptop there should also be a volume control called 'Internal MIC' - disable it by placing a check-mark in the mute box.
NOTE if microphone (or internal MIC) is not listed in the
2 sets of volume controls click OPTIONS, PROPERTIES on the tool-bar and
place a check against microphone in the list entitled
'show the following volume controls' and then click OK.
That should be it but it is possible you may also need to turn off the microphone in the software for your web-cam.
Feb 09, 2011 | Audio Technica ATR3350 Microphone
Dec 14, 2010 | Magic Entertech ED-9000 Mic Sing Along...
Feb 03, 2009 | Magic Entertech 8 USB edition + 2,000...
Jan 25, 2008 | Cyber Acoustics CV-1064 Microphone
660 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: