Question about Televison & Video

1 Answer

I need to install a new screen in my lcd tv model # lt-32x576 & i need step by step instructions

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 563 Answers

First, I must ask you the question, have you already purchased the replacement? If you haven't, have you been given a price on one? Normally, the screen of an LCD isn't replaceable because it contains the most expensive parts of the set. In the industry it's called the panel, and most manufacturers will replace your TV if the panel develops a defect while under warranty. However, if you've actually purchased a new panel or a refurbished one, there are some experts here who may know how to install one. Keep in mind though, that most TV repairmen have never had to replace a panel before. Believe it or not, a new panel for an LCD costs more than what you pay retail for the entire set. I work for 4 different TV manufacturers.

Please post a comment if you need additional assistance so that I can help you further.


Posted on Jul 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replace power supply for mitsubishi LT-52148


see this instruction. God bless you

    • 1
      Unplug the monitor power cable. You should never attempt to disassemble an electronic component without first detaching it from its direct power source.

    • 2
      Remove the screws from the back of the monitor and along the edge of the screen. Depending on manufacturer and model, LCD monitors will have screws located on different parts of the monitor's body. Once the screws are off, use a flat-tipped tool, such as a knife or a screwdriver, to pry the monitor open by dislodging the two halves; be careful not to tear wires connecting the two halves.


    • Sponsored Links

    • 3
      Locate the power supply unit and take its metal casing off. Once again, different models of LCD monitors will have the unit placed in different locations. With the casing undone, unplug cables running from the power supply to other internal components. Mark the cables that you unplug from the power supply--you will have to plug them back in to the new unit.

    • 4
      Dislodge the power supply from its dock. In some monitors you might have to undo screws that hold the power supply unit in place. Remember the orientation of the unit as it was placed, because you will have to insert the new unit in exactly the same way.

    • 5
      Insert the new power supply into the dock and screw it in place. If you do not have a new power supply, read the label on the existing one to order a new one from the manufacturer or from a third-party supplier. Obtain a power supply unit that is compatible with your LCD monitor; never try to use a generic spare. After installing the new unit, plug in the cables exactly as they were in the old unit.

    • 6
      Put the power supply casing back on and reassemble the LCD monitor frame. Gently clasp the two halves of the monitor shut, making sure you have reattached all cables that you unplugged to take the monitor apart. Close the casing, tucking away all cables neatly so they do not get in the way of the monitor casing.

    • 7
      Put all the screws back on. Once done, you should have no leftover pieces (screws or cables).


Read more: http://www.ehow.com/how_6165539_replace-lcd-monitor-power-supply.html#ixzz2ZJV8TbYP

Jul 17, 2013 | Mitsubishi LT-52148 52-Inch 1080p LCD HDTV

1 Answer

My screen turns green and no sound


This could be in the main processor board, or in the display substrate itself. The service rep would test by trying out boards until he gets to the fault. After board replacement he would check any recommended calibrations, and then return the set to the customer. If the set is more than a few years old, it may not be possible have new boards.

Jerry G.

Jun 25, 2012 | JVC LT-32X576 32 in. LCD Television

1 Answer

When i try to turn on the tv set only the blue power light is on, not the screen not sound


You may have power supply problem due to bad caps, or bad main board, or shorted circuits that stop the TV from going on to protect itself. You need to open it up and do in-depth troubleshooting.
Please read my guide first if you are going to DIY repair.

Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors pictures: http://s807.photobucket.com/albums/yy352/budm/

Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague

Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.
Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series

Aug 25, 2011 | JVC LT-32X576 32 in. LCD Television

1 Answer

VERTICAL LINE


My screen has vertical multiple colors lines

May 12, 2011 | JVC LT-32X576 32 in. LCD Television

1 Answer

Power problem with JVC LT-32x576


there is a firmware update for this model download from jvc website onto a thumb drive and plug it into the side plug.

Mar 10, 2009 | JVC LT-32X576 32 in. LCD Television

1 Answer

36" jvc tv start button flashing


you must hit the input button on the side of the TV until your input is detected.

Apr 30, 2008 | JVC LT-32X576 32 in. LCD Television

1 Answer

Jvc model 32X576


I have the same problem. I finally convinced JVC's tech support to help me out (they **** by the way) and I got the schematics for all the boards in the unit. From looking at them I believe it is the Digital Signal Board. I will post results soon.

Feb 06, 2008 | JVC LT-32X576 32 in. LCD Television

1 Answer

Closed caption


There is a step-by-step set of instructions in your owner's manual... If you've misplaced it here a link to download it..
Bill
http://books.jvcservice.com/booklist.asp?Model=lt32x506

Dec 15, 2007 | JVC LT-32X506 32 in. LCD Television

1 Answer

Picture blacks out after a few seconds after turning on the tv


Anytime an LCD has a shade of pink, that means the CCFL lamps are about to go out. Now that you have a black screen, I'd say you just need some new bulbs.

Dec 07, 2007 | JVC LT-32X576 32 in. LCD Television

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73619 Answers

Cindy Wells

Level 3 Expert

5054 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...