Question about Yamaha HTR-5560 Receiver
My receiver will not turn on it double clicks when pushing the power button
IT IS THE POWER SUPPLY HAS TO BE CHANGED ONLY THING IT COS AS MUCH TO FIX AS TO BUY A NEW UNIT AS I WAS TOLD UNLESS U KNOW WHER I CAN FID A POER SUPPLY FOR THAT MODEL
Posted on Feb 29, 2008
I had this problem also and discovered an easy way to trick it into powering on: Click the power button, then within 1 second of the receiver powering off, click the power button again. The receiver should stay on this time. This works with both the button on the receiver and the remote control.
I would like to know what causes this problem and whether or not I should be concerned about damage being done. I assume this is a power protection. I haven't tried plugging this receiver into a different power socket to test, but I don't think the power plug is the problem. Note: I have the subwoofer plugged into the power plug on the back of the receiver.
Posted on Feb 27, 2010
SOURCE: I've had the same
Sounds like the unit is set to shutdown if it detects a short in the amplifier. The problem can be within the supply but it is most likely in the amp section of the unit. Transistors will go out over time and need to be replaced. Find a local repair shop and have them estimate the repair for you. the cost on something like this can be in the 70.00 range depending on shop rates in your area and the extent of the problem.
Posted on May 04, 2010
Tips for a great answer:
Apr 06, 2014 | Denon AVR-1708 Receiver
Sep 15, 2012 | Denon AVR-2803 Receiver
Jun 15, 2010 | Sherwood RX-4105 Receiver
Feb 23, 2010 | Onkyo HTR500 Receiver
Jul 07, 2009 | KLH Audio & Video Receivers
Jul 04, 2008 | Audio & Video Receivers
128 people viewed this question
Usually answered in minutes!