Singer has the parts list for the 258 on their support site: http://www.singerco.com/support/replacement-parts-chart . The direct link is http://parts.singerco.com/CPpartCharts/2_2999/258.pdf . The lamp is shown on page 6. The part number is 603938-001 or 603938-002 (Light L 11) depending on if the machine's motor is UL or Standard. Amazon has a couple of vendors that list the 603938 bulb. One of the vendors is http://www.amazon.com/Singer-Long-Light-Watt-120-Volt-Push-In/dp/B0001DUOSY .
I hope this helps.
Cindy Wells
SOURCE: Singer 258
There is no speed adjust, but 1st you must know the source of the slow down. Remove the belt from the motor pulley and run it, if it goes fast try turning the hand wheel if it is stiff the machine needs clean and oil. If it turns freely you motor may be dirty or just slow. If dirty, sometimes you can without the blet attached run it at full speed for 10 to 15 minutes. It should get faster as you run it. If not motor is weak or slow needs replace. Just replacement motor as genuine probably no longer available.
SOURCE: How do I change the light bulb in my Singer 2210 sewing machine?
here's a link for a free manual,, look on page 45 & see if that page
show how to change the light bulb
http://www.singerco.com/uploads/download/642_2210.pdf
Testimonial: "Thanks so much for responding! New bulb in and working! Thanks"
Did you contact support at Singer? Did you google it? Did you check with a sewing machine repair outlet?
227 views
Usually answered in minutes!
×