Question about Kenmore 2.1 cu. ft. Portable Top Load Washer
When filling the washer machine, the washer machine keeps filling until it overflows. Do i need to replace a pressure sensor or some kind of water meeter so that the washer machine "clicks" and begins to wash the load instead of overfilling?
Set the water level selector to a lower level. The sensor will always work if the water level is much higher than the trigger level. However, the "much higher" condition is never reached if the water is about to overflow.
Posted on Sep 14, 2008
Keeps filling with water
Posted on Dec 06, 2007
SOURCE: Filling With Water
If the water continues when electricity is discontinued the soleoid valve is jammed open, a fleck of rust or something, not designed to be repaired, it is easier and cheaper to replace. they are a standard part that fits 99% of all washers ~$10-20 at the local parts guy.
Usually only the cold solenoid has failed. it gets used more often.
If you are like me and only use cold water, swap the hoses on the taps, and swap the wire connectors on the solenoid valves, so the former hot is now cold, and you will get about the same number of years before you have to replace anything
Posted on Jul 29, 2008
Tips for a great answer:
Oct 02, 2011 | Kenmore 24032\24036 Top Load Washer
Jul 22, 2010 | Washing Machines
Jun 28, 2010 | Maytag LSE7806A Top Load Stacked...
Oct 24, 2009 | Kenmore 22422 Top Load Washer
Aug 31, 2009 | Washing Machines
Aug 18, 2009 | Kenmore Washing Machines
Oct 18, 2008 | GE WBB4500EWW Top Load Washer
May 06, 2008 | Kenmore 22422 Top Load Washer
Jan 03, 2008 | Washing Machines
690 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: