Question about IBM Wheelwriter 30 Typewriter

Open Question

I'm getting a small square with 114 08 - IBM Wheelwriter 30 Typewriter

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to get back minimize and close small squares?

this means a ram or screen problem. Needs a serious repair as it will get worse.

Sep 07, 2014 | Computers & Internet

1 Answer

I have a glass door knob (I do not know that manufacturer for this.) I do not have the latch for it. It only came with a gray plastic piece. I purchased a schlage spring latch replacement part for this,...

I am thinking that the knobs and the lock have the same size of square metal shaft. You can try out a good hardware store for some square stock metal. This might be an easy fix. If the lock shaft size is actually smaller than the knob, you can cut some small strips of tin to shim the 4 sides of the shaft that goes into the knob.

Jan 15, 2011 | Garden

1 Answer

I turn on the calculator and all I get is a small black square dot in the upper left corner. TO Connect can read the unit, but nothing works on the display.

If the small black square does not blink The Calculator is Locked
it need an hardware reset
let me know if you if you want to fix the Calculator
[email protected]


Oct 21, 2010 | Texas Instruments TI-84 Plus Calculator

1 Answer

Screen is blank with a small square in the middle

hello there:
try by restarting the computer and using the f8 key you need to go to the last known good configuration it should restore if not you will need to reinstall the windows program hope this helps you out sincerely D.Jones

Jun 06, 2010 | E-Machines M5405 Notebook

1 Answer

How do you put a key back on a laptop keyboard. It is a plastic key with a sissor latch and a small diameter metal rod bent into a wide square bottomed U. My daughter pulled it off can't get it to latch...

You have to get the sissor part back on first,
there are 4 small i-holes in a square on the keyboard,,

on the sissor part there is 4 small nubs on each corner, thay clip into the 4 i-holes,,

the key itself just clips down on the sissor part.<---Make sure its lined up b4 pushing

May 16, 2010 | Toshiba Satelite A135-S2286 Notebook

1 Answer


Hi there,here is you answer,enjoy
There are 6 lines of pins
On each line they are in different positions
So for this occasion we are gonna number these from 1-28,from left to right then from top to bottom
We will give each square a colour and a number
1*Large blue square join the 4 corners at pins 8 to 16 to 23 to 28
2*Large yellow square join at pins 4 to 12 to 21 to 27
3*Small red square join at pins 17 to 22 to 24 to 26
4*Small brown square join at pins 14 to 18 to 20 to 25
5*Small light blue square join at pins 5 to 9 to 11 to 15
6*Small white square join at pins 1 to 2 to 6 to 7
7*Medium white square join at pins 3 to 10 to 13 to 18

Hope this helps its the easiest way i think i can describe it

Jan 06, 2010 | Nintendo Professor Layton & the Curious...

1 Answer

Infocus x2...the bulb melts the small square lens even w/ fan on

there is more than one fan inside. one of them may not be working. also, if there is excessive dust inside, the heat won't leave. blow out all of the dust with canned air. if one of the fans are running slow, replace it. lastly, do not use an aftermarket lamp. get a good one from the comapny.

Jun 14, 2009 | InFocus Office Equipment & Supplies

1 Answer

Puzzle 100

heres a hint

1. Most of the squares you make will be tilted 45 degrees
to the side, and their sizes will vary as well.
Start by looking for pins you can connect to create squares
at a diagonal.
2. You want more specifics? All right, here's the location
of one of the squares. Connect the four pins in the top-left
corner to form a tiny square. Just so you know, this is the
only square on the board that isn't tilted.
3. The largest square contains the pin that's third from
the top on the left column and the bottom pin from the far-right
column. You also need to form a small diagonal block using the
two pins lined up diagonally on the bottom-left portion of the
board. There are two more small squares just like this one on the board.


Jan 13, 2009 | Nintendo Professor Layton & the Curious...

1 Answer

Small black square in top left...won't turn off

You should replace the AAA batteries with new ones, and should by a new set of back up batteries.

Aug 23, 2007 | Texas Instruments TI-83 Plus Calculator

Not finding what you are looking for?
IBM Wheelwriter 30 Typewriter Logo

Related Topics:

147 people viewed this question

Ask a Question

Usually answered in minutes!

Top IBM Office Equipment & Supplies Experts

James Cagle
James Cagle

Level 2 Expert

481 Answers

Jim Keysor

Level 2 Expert

331 Answers


Level 3 Expert

2239 Answers

Are you an IBM Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides