Question about Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

Lost blue; otherwise normal; blinks 5x - Sony FD Trinitron WEGA KV-32FS120 32" TV

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 448 Answers

If the TV standby light is blinking for five times then you may perform the steps given below:
(i) Turn off the TV then disconnect all the cables from the TV.
(ii) Next, reconnect all the cables after two minutes.
(iii) Please make sure that the power cable from the TV is directly connected to a functional wall outlet.
(iv) Next, you may try resetting the TV to the original factory settings.

Please follow the steps that are mentioned below to reset the TV to the original factory settings:

(a) Turn ON the TV.
(b) Press and hold the Power button on the Remote Control supplied with the TV, then press the Power button on the TV front panel.
(c) Release the Power button. The TV will turn itself off, then back ON again.
(d) Next, release the Reset button on the Remote control.

If the standby light still blinks then the issue may be with the projection lamp in the TV and requires replacement.

Posted on Jul 12, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sony Bravia KDL-60EX500 no longer turns on.


Refer to Sony KDL 55EX500 Troubleshooting Manual Protection Mode Symptom...
5X Blink - TCON & HFR Failure
The 5X blink protection mode indicates a communications error between the TCON/HFR board and the MT5388 microprocessor on the A-Board.
First replace the TCON/HFR Board if the 5X protection mode blink pattern occurs. If the TCON/HFR Board does not repair the problem then replace the A-Board.

see schematics in Sony KDL 55EX500 Troubleshooting Manual Page 23

Sep 15, 2016 | Sony Bravia Kdl-60ex500 60" Inch 120hz...

1 Answer

Dead battery- won't take a charge- it just blinks amber.Do I need a new battery for my Samsung 5x?


Sounds indeed like the battery is dead. You could try checking it with a volt meter. If the volt meter says it is fully charged then you have a problem with the camera instead

May 10, 2015 | Samsung PL20 Digital Camera -Silver...

1 Answer

My sony bravia kdl-32s3000 keeps turning off and the standby light is flashing 5 times


Just a copy from Sony:
5X Blink - TCON & HFR Failure
The 5X blink protection mode indicates a communications error between the TCON/HFR board and the MT5388 microprocessor on the A-Board. First replace the TCON/HFR Board if the 5X protection mode blink pattern occurs. If the TCON/HFR Board does not repair the problem then replace the A-Board.

a8f192a.gif

Oct 24, 2012 | Sony KDL-32S3000 32 in. LCD Television

1 Answer

The TV won't turn on, and the standby light is blinking in groups of 5. The manual mentions this, but only that the number of blinks is significant, not in which way. What do we do?


Just a copy from Sony:
5X Blink - TCON & HFR Failure
The 5X blink protection mode indicates a communications error between the TCON/HFR board and the MT5388 microprocessor on the A-Board. First replace the TCON/HFR Board if the 5X protection mode blink pattern occurs. If the TCON/HFR Board does not repair the problem then replace the A-Board.

a8f192a.gif

Jun 14, 2010 | Sony KDL46EX500 46 in. HD-Ready TV

1 Answer

Lost sound


try move the video files out of your folder "my picture"

Aug 22, 2009 | Nikon Coolpix S550 10 Megapixel Digital...

1 Answer

Please help-question about sony optical blocks


Talk to Sony about the blue blob issue, they may still replace the optical block for free.

If not, fix the blinking light TV.

Blink Codes
3X - Lamp cover not installed correctly, usually after lamp change, or cover detect switch is bad.
4X - Check fans (one or more failed to pass RPM test during power on diagnostics)
5X - Lamp ballast (power supply)
6X - Usually the thermal fuse - usually from inadequate air flow (fans dusty)

All other codes usually require a trained technician to diagnose and repair.

Oct 29, 2008 | Sony Grand WEGA KDF-60XS955 60" Rear...

Not finding what you are looking for?
Sony FD Trinitron WEGA KV-32FS120 32" TV Logo

184 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

kakima

Level 3 Expert

102366 Answers

The Knight
The Knight

Level 3 Expert

74383 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...