Question about Canon PIXMA MG3520 Wireless Inkjet Photo All-in-One Printer, Red, 9.9ipm Black/5.7ipm Color, 4800x1200 dpi Color Resolution, USB - Print, Copy, Scan

2 Answers

What dos BK and CL lights mean? - Canon PIXMA MG3520 Wireless Inkjet Photo All-in-One Printer, Red, 9.9ipm Black/5.7ipm Color, 4800x1200 dpi Color Resolution, USB - Print, Copy, Scan

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

BK is the black print head and CL is the color print print head.

Posted on Sep 09, 2015

  • Mary Lou Forga
    Mary Lou Forga Mar 15, 2016

    There's still ink ,why would they blink ?

  • Gilma Flores
    Gilma Flores Jan 11, 2017

    LOL IS THING IS SO F###### DUM

×

Ad
  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 20 Answers

Ink is dried on the contacts of the print cartridge or on the printer itself. take q-tip and water and clean both of them. try to prime it once and then do a test print.

Posted on Mar 16, 2016

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Canon Pixma MG printer . There's orange lights at BK & CL that are blinking? What does that mean ?


means that the toner cartridges are just about out of ink and need replacing
BK=black and CL= color

Mar 15, 2016 | Canon Office Equipment & Supplies

1 Answer

How do i set the language on a bluetooth cl bt001 bk to english


Basically, all functions are handled by the phone. The only control on the headset is an on/off button. Have a scanned image of manual but it's too big to load here.

Jan 21, 2014 | Case Logic Radio Communications

2 Answers

How to reset ink level canon iP 2772??


Download and run the ipTool to reset your ink level :


http://www.mediafire.com/?nmj5nnzzjaw


Features IP Tool software:

  • Showing all info on the printer such as ink level, ink counter number of cleaning, cartridge replacement and more.
  • Print test feature to test nozzle on the cartridge.
  • Cleaning and deep cleaning feature to clean head cartridge and cleaning the rollers.
  • Changing the delay value for drying.
  • Set the printer model manually.
  • Reading and reset EEPROM printer.
  • Reset counter and reset ink level on the color and black cartridges.
Ink Level - shows the level ink:
  • BK - black cartridge.
  • CY - Cyan cartridge.
  • MG - Magenta cartridge.
  • YL - Yellow cartridge.
  • WM - Waste ink counter status.
  • WP - "additional" waste ink counter status.
Port Name - displays the port where the printer installed.
Port S / N - shows the serial number of the printer port.
Power - shows the number of:
  • ON - inclusions printer.
  • OFF - to turn off the printer.
Cartridge Info - Displays information status of:
  • BK - black cartridge.
  • CL - colored cartridge.
Head Parking - displays the number of parking.
Head Cleaning - shows the number how many time the cartridge cleaned.
Head Deep Cleaning - displays the number of deep cleaning Printer cartridge.
Cartridge Replacement - shows the number of cartridge replacements:
BK - black cartridge.
CL - colored cartridge.


Click on this link or copy and paste the complete link into your browser.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response. Happy Holidays!

Thanks, Joe



I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Dec 20, 2010 | Office Equipment & Supplies

1 Answer

When turn on netbook, it goes into dos


Hello there!

Make sure that you have installed the operating system.

Regards,
fossildude

Dec 07, 2010 | ASUS Eee PC 1005HA-PU1X-BK Netbook

1 Answer

CL error code. what does it mean?


Hi


Thanks for using FixYa. CL means child lock, it might have got locked. Try pressing "dry" & "spin" together for 10 seconds or until the CL disappears. Also try pressing "end of cycle" for over 5 seconds. If this doesn't work then try pressing "options & select" till the light goes off. Also try and press ECO and rapid buttons together for more than 10 seconds. Please do rate the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

Aug 29, 2010 | Washing Machines

1 Answer

Service Error 5C00 - iP90v Pixma Canon Printer


Clean it out underneath the printhead & cleaning mechanism first (paper towel), then do the fix routine.

------------------
1) Close the print head cover, and turn off the printer. While pressing the Resume/Cancel button, press the Power button. (Do not release the buttons. The LED lights in green to indicate that a function is selectable.)

2) While holding the Power button, release the Resume/Cancel button. (Do not release the Power button.)

3) While holding the Power button, press the Resume/Cancel button three times, and then release the Power and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the LED lights alternately in either orange or green, starting with orange.) During initialization, the LED blinks in green.

4) When the LED stops blinking and lights in green, press the Resume/Cancel button the 4 times. (Each time the Resume/Cancel button is pressed, the LED lights alternately in either orange or green, starting with orange.)

5) Press the Power button. The LED lights in green, and the
selected function is performed. (When the operation completes, the printer returns to the menu selection mode automatically.)

6) Power off then back on and test.
also there are TWO distinct steps to resetting the TWO ink counters in aan iP90. Enjoy.

3-3. Adjustment / Settings

(1) Service mode
The basic operations are the same as those of the i70 / PIXUS 50i.
In this section, destination settings, how to reset the waste ink counter, and EEPROM information
printing, which differ from those of the i70 / PIXUS 50i, are detailed.



1) Turn off a printer. While pressing the Resume/Cancel button, press the Power button.
The LED lights green to indicate that functions are selectable.

2) While holding the Power button, release the Resume/Cancel button. (Do not release the Power
button.)

3) While holding the Power button, press the Resume/Cancel button 3 times, and then release the
Power and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the LED
alternately lights in either orange or green, starting with orange.)

4) When the LED lights green, press the Resume/Cancel button as many times as you need, to
select the preferred function. (See the table below.) Each time the Resume/Cancel button is
pressed, the LED alternately lights in either orange or green, starting with orange.
(The color red indicates the changes from the i70 / PIXUS 50i.)

Time(s) LED Function Remarks

0 times Green Power off When the print head is not installed, the carriage
returns and locks in the home position.
1 time Orange Service test print
2 times Green EEPROM information print
3 times Orange EEPROM initialization
4 times Green Waste ink counter resetting Proceed to step 5) below. Once executing step 5), then, move on to step 6) to select the waste ink counter to be reset. (Different from the i70 /
PIXUS 50i.)
5 times Orange Destination settings Proceed to step 5) below. Once executing step 5), then, move on to step 7) to select a
destination. (Different from the i70 / PIXUS 50i.)
10 times Green Return to the menu selection

5) After the function (menu) is selected, press the Power button. The LED lights green, and the
selected function will be performed. (When the operation completes, the printer returns to the
menu selection mode automatically.)


6) Press the Resume/Cancel button the specified number of time(s), then press the Power button.
Time(s) LED Waste ink counter to be reset

0 time Green Main waste ink counter
1 times Orange Platen waste ink counter
2 times Green Main waste ink counter and platen waste ink counter (at the
same time)
Note: When the waste ink counter is reset, print the EEPROM information as shown below,
and confirm that the value of the counter is 0 %.

8


7) Press the Resume/Cancel button the specified number of time(s) according to the destination
listed in the table below, then press the Power button.
Time(s) LED Destination
1 time Orange Japan: PIXUS iP90
2 times Green Other than Japan (A4): PIXMA iP90
3 times Orange Other than Japan (LTR): PIXMA iP90 (LTR)
Note: After the specific destination is set, print the EEPROM information as shown below, and
confirm the model name.


Print sample:
1:iPXXXX 2:V1.02 3:IF(USB=1) 4:D=004.9 PD=000.0 5:ST=2005/09/27-18:30
6:ER(ER0=1000 ER1=5100) 7:LPT=2005/09/028-09:09 8:PC(M=002 R=000 T=001 D=009 C=009)
9:CLT(BK=2005/09/27-18:30 Cl=2005/09/27-18:30) 10:CH=00002 11:CT(BK=040 CL=013)
12:IS(BK=1 C=0 M=1 Y=1) 13:IC(BK=00000 C=00000 M=00000 Y=00000)
14:Power(SON=00009 SOFF=00009)
15:REG=0 16:UR(A(BKoe)=+01 B(Coe)=-01 C(Moe)=+01 D(SCoe)=-01 E(SMoe)=+01 F(BKbi)=+01
G(CLbi)=+01 H(BK-CL)=+01 I(SCLbi)=+01 J(C-SC)=+01 K(M-SM)=+01)
17:WP=0024 18:CDIN(LG=001 PB=000) 19:MSD(015)
20: PAGE(All=00083 PP=00035 HR+MP=00003 PR+SP+SG=00003 GP=00000 PC=00000 ENV=00000)
21:CDPAGE=00003 IRPAGE=00003 BTPAGE=00003 PBPAGE=00000 22:BAT PAGE=00000
23:EDGE=00083 24:L=00000 25:HEAD Temp=30.0 26:Env Temp=30.0 27:FF(3F 3F 3F)
HDEEPROM
1:V0001 2:SN=0000-3D6B 3:LN(00000 00000 000001 000003 00001 00000 00000) 4:ID=00
5:IL=(BK=000 C=+01 M=000 Y=+01 C2=+01 M2=000 Y2=+01)

Printed items:
1. Model name 2. ROM version 3. Connected I/F (USB1) 4. Main waste ink amount, Platen waste ink amount
5. Installation date 6. Operator call/service call error record 7. Last printing time 8. Purging count
(manual/deep/timer/dot count/print head installation and removal/ink tank installation and removal)
9. Cleaning time 10. Print head installation and removal (change print head) count 11. Ink tank installation and
removal (change ink tanks) count (Bk/CL) 12. Ink status (Bk/C/M/Y) 13. Total ink consumption 14. Power-on
count (soft power on/soft power off/hard power on) 15. Print head alignment implementation 16. User print head
alignment values (Bkoe/Coe/Moe/SCoe/SMoe/BKbi/CLbi/BK-CL/SCLbi/C-SC/M-SM) 17. Number of times of wiping
18. Number of times of camera port connection and removal (Legacy, PB) 19. Number of the maximum printing
intermission in days 20. Number of print pages (total/plain paper/high resolution paper + Matte Photo Paper/Photo
Paper Pro + Photo Paper Plus Glossy + Photo Paper Plus Semi-gloss/Glossy Photo Paper/Card/Envelope) 21.
Number of Camera Direct Print pages (total), number of IRDA print pages (total), number of Bluetooth print pages
(total), and number of Print Beam print pages (total) 22. Number of print pages using battery (total) 23. Number of
borderless print pages 24. Number of print page (L/4” x 6”) 25. Print head temperature 26. Inside temperature
27. Line inspection information

HDEEPROM
1. Version
2. Serial number
3. Lot number
4. Print head ID
5. Ink ejection level (Bk/C/M/Y)

If you need further help, reach me via phone at https://www.6ya.com/expert/david_eb7ea98642566cc6

Jul 23, 2009 | Office Equipment & Supplies

2 Answers

CL code on screen and can not use sensor dry options


For model 2514; from LG manual:

Child Lock: Press and hold DRY LEVEL for 3 seconds. A single BEEP Tone is heard, and CL is displayed. To unlock, press and hold DRY LEVEL for 3 seconds. The indicator light turns off.

May 23, 2009 | LG DLE2514 Electric Dryer

1 Answer

MAINTENANCE LIGHT ON MY 1997 ACURA 2.2 CL IS YELLOW


Time for service, look in your owners manual for the mileage.  At the very least you are due for an oil change.

Yellow means you need it soon
Red means you ignored the yellow and need it now


If you don't rely on your car to get you places, you can ignore these and do some expensive repairs later.  If it's time for a timing belt and you ignore that,  it might cost $2000-3000 when it breaks.

Oct 29, 2008 | 1997 Acura CL

1 Answer

UNABLE TO PRINT


press menu then start bk copy then fourtimes arrow-up button (tel.index) quick after another.

machine will be in maintenance mode and lights will flash.

press start bk copy in case machine wont directly display the error code.

Error starting with 4 means defective print head.
Error starting with 5 menas defective purge station or cycle problems.

both error series means: you need a new printer...

Feb 13, 2008 | Brother MFC-5840CN All-In-One InkJet...

Not finding what you are looking for?
Canon PIXMA MG3520 Wireless Inkjet Photo All-in-One Printer, Red, 9.9ipm Black/5.7ipm Color, 4800x1200 dpi Color Resolution, USB - Print, Copy, Scan Logo

16,891 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

old marine
old marine

Level 3 Expert

2254 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...